An official website of the United States government
In this study, a four-port solid-state transformer (SST) with decoupled control scheme to control the power flow and the output voltage is proposed. The proposed decoupled control scheme controls all of the four ports' powers independently. In addition, the design of the four-port transformer including core material selection and winding placement is investigated. The designed transformer is modeled in ANSYS-Maxwell and also co-simulated with ANSYS-Simplorer. The operating frequency of the system is designed for 100 kHz; therefore, a very compact size is obtained for the entire multi-port converter. The performance of the proposed system is validated throughout MATLAB/Simulink simulation and experimental studies carried out for a 10kW/port SST prototype. The obtained results show that the four-port SST provides an interface for four-different power supplies or loads. It is seen that the proposed decoupled control scheme can control the output voltage at the desired value and track the reference power signals for each port. It provides as well a good steady state and dynamic performance.
more »
« less
Addressing Grid Nonlinearities in Discrete Electromechanical Oscillation Control
This paper progresses on the development of the discrete electromechanical oscillation control (DEOC). The DEOC approach is based on the step-wisely control of electronically-interfaced resources' (EIR) power output and aims to significantly reduce the amplitude of multiple oscillatory modes in power systems. The theoretical formulation of the problem and the proposed solution is described. This work addresses the issues of a nonlinear grid representation and favorable reduction of control actions from EIRs, as well as their impact on the DEOC performance. Simulations on a 9-bus system validate the effectiveness of the proposed control even when highly load scenarios are considered.
more »
« less
- Award ID(s):
- 2044629
- PAR ID:
- 10489613
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- North American Power Symposium
- ISSN:
- 2163-4939
- ISBN:
- 979-8-3503-1509-7
- Page Range / eLocation ID:
- 1 to 6
- Format(s):
- Medium: X
- Location:
- Asheville, NC, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper presents a deep learning based multi-label attack detection approach for the distributed control in AC microgrids. The secondary control of AC microgrids is formulated as a constrained optimization problem with voltage and frequency as control variables which is then solved using a distributed primal-dual gradient algorithm. The normally distributed false data injection (FDI) attacks against the proposed distributed control are then designed for the distributed gener-ator's output voltage and active/reactive power measurements. In order to detect the presence of false measurements, a deep learning based attack detection strategy is further developed. The proposed attack detection is formulated as a multi-label classification problem to capture the inconsistency and co-occurrence dependencies in the power flow measurements due to the presence of FDI attacks. With this multi-label classification scheme, a single model is able to identify the presence of different attacks and load change simultaneously. Two different deep learning techniques are compared to design the attack detector, and the performance of the proposed distributed control and the attack detector is demonstrated through simulations on the modified IEEE 34-bus distribution test system.more » « less
-
This paper proposes a control scheme that prevents the adverse dynamic interactions between the heterogeneously controlled grid-forming inverters (GFMI) in power electronics dominated grid (PEDG) towards a resilient self-driving grid. The primary controller of GFMIs in a grid cluster can vary based on their manufacturers such as virtual synchronous generation, droop control, power synchronization control, etc. Therefore, this can introduce heterogeneity among the network of GFMIs in PEDG. Resultantly, during the interconnection of GFMIs that are based on heterogenous primary controller poses various synchronization and dynamic interaction challenges in PEDG. For instance, severe fluctuations in frequency and voltage, high ROCOF, unintended reactive power circulation that poses a threat on the overall transient stability of the PEDG. Therefore, to mitigate these adverse dynamic interactions among the heterogeneously controlled GFMIs, a force enclaved homogenization (FEH) control is proposed in a supervisory level controller. This will autonomously adjust inertia coefficients of the each GFMI to have homogenous transient response and will enforce coherency among the heterogenous DGs. This will prevent the PEDG from the adverse dynamic interactions during an interconnection and load disturbance. Various case studies are presented that validates the effectiveness of the proposed FEH control.more » « less
-
In this study, a power converter topology and control schemes for the power converter stages are proposed for a DC extreme fast charger. The proposed system is composed of a cascaded H-bridge (CHB) converter as the active front end (AFE), and an input series output parallel (ISOP), which includes three parallel connected dual active bridge (DAB) cells. A modified Lyapunov Function (LF) based control strategy is applied to obtain high current control response for the AFE. An additional controller to remove the voltage unbalances among the H-bridges is also presented. Additionally, the triple phase-shift (TPS) control method is applied for the ISOP DAB converter. A Lagrange Multiplier (LM) based optimization study is performed to minimize the RMS current of the transformer. The performance of the proposed converter topology and control strategies is validated with MATLAB/Simulink simulations.more » « less
-
Despite the IEEE Power Electronics Society (PELS) establishing Technical Committee 10 on Design Methodologies with a focus on the cyber-physical security of power electronics systems, a holistic design methodology for addressing security vulnerabilities remains underdeveloped. This gap largely stems from the limited integration of computer science and power/control engineering studies in this interdisciplinary field. Addressing the inadequacy of unilateral cyber or control perspectives, this paper presents a novel four-layer cyber-physical security model specifically designed for electric machine drives. Central to this model is the innovative Control Information Flow (CIF) model, residing within the control layer, which serves as a pivotal link between the cyber layer’s vulnerable resources and the physical layer’s state-space models. By mapping vulnerable resources to control variable space and tracing attack propagation, the CIF model facilitates accurate impact predictions based on tainted control laws. The effectiveness and validity of this proposed model are demonstrated through hardware experiments involving two typical cyber-attack scenarios, underscoring its potential as a comprehensive framework for multidisciplinary security strategies.more » « less
