In this study, a four-port solid-state transformer (SST) with decoupled control scheme to control the power flow and the output voltage is proposed. The proposed decoupled control scheme controls all of the four ports' powers independently. In addition, the design of the four-port transformer including core material selection and winding placement is investigated. The designed transformer is modeled in ANSYS-Maxwell and also co-simulated with ANSYS-Simplorer. The operating frequency of the system is designed for 100 kHz; therefore, a very compact size is obtained for the entire multi-port converter. The performance of the proposed system is validated throughout MATLAB/Simulink simulation and experimental studies carried out for a 10kW/port SST prototype. The obtained results show that the four-port SST provides an interface for four-different power supplies or loads. It is seen that the proposed decoupled control scheme can control the output voltage at the desired value and track the reference power signals for each port. It provides as well a good steady state and dynamic performance.
more »
« less
Addressing Grid Nonlinearities in Discrete Electromechanical Oscillation Control
This paper progresses on the development of the discrete electromechanical oscillation control (DEOC). The DEOC approach is based on the step-wisely control of electronically-interfaced resources' (EIR) power output and aims to significantly reduce the amplitude of multiple oscillatory modes in power systems. The theoretical formulation of the problem and the proposed solution is described. This work addresses the issues of a nonlinear grid representation and favorable reduction of control actions from EIRs, as well as their impact on the DEOC performance. Simulations on a 9-bus system validate the effectiveness of the proposed control even when highly load scenarios are considered.
more »
« less
- Award ID(s):
- 2044629
- NSF-PAR ID:
- 10489613
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- North American Power Symposium
- ISSN:
- 2163-4939
- Page Range / eLocation ID:
- 1 to 6
- Format(s):
- Medium: X
- Location:
- Asheville, NC, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract This paper presents the genetic algorithm (GA) and particle swarm optimization (PSO) based frequency regulation for a wind‐based microgrid (MG) using reactive power balance loop. MG, operating from squirrel cage induction generator (SCIG), is employed for exporting the electrical power from wind turbines, and it needs reactive power which may be imported from the grid. Additional reactive power is also required from the grid for the load, directly coupled with such a distributed generator (DG) plant. However, guidelines issued by electric authorities encourage MGs to arrange their own reactive power because such reactive power procurement is defined as a local area problem for power system studies. Despite the higher cost of compensation, static synchronous compensator (STATCOM) is a fast‐acting FACTs device for attending to these reactive power mismatches. Reactive power control can be achieved by controlling reactive current through the STATCOM. This can be achieved with modification in current controller scheme of STATCOM. STATCOM current controller is designed with reactive power load balance for the proposed microgrid in this paper. Further, gain values of the PI controller, required in the STATCOM model, are selected first with classical methods. In this classical method, iterative procedures which are based on integral square error (ISE), integral absolute error (IAE), and integral square of time error (ISTE) criteria are developed using MATLAB programs. System performances are further investigated with GA and PSO based control techniques and their acceptability over classical methods is diagnosed. Results in terms of converter frequency deviation show how the frequency remains under the operating boundaries as allowed by IEEE standards 1159:1995 and 1250:2011 for integrating renewable‐based microgrid with grid. Real and reactive power management and load current total harmonic distortions verify the STATCOM performance in MG. The results are further validated with the help of recent papers in which frequency regulation is investigated for almost similar power system models. The compendium for this work is as following: (i) modelling of wind generator‐based microgrid using MATLAB simulink library, (ii) designing of STATCOM current controller with PI controller, (iii) gain constants estimation using classical, GA and PSO algorithm through a developed m codes and their interfacing with proposed simulink model, (v) dynamic frequency responses for proposed grid connected microgrid during starting and load perturbations, (vi) verification of system performance with the help of obtained real and reactive power management between STATCOM and grid, and (vii) validation of results with available literature.
-
There is enormous flexibility potential in the power consumption of the majority of electric loads. This flexibility can be harnessed to obtain services for managing the grid: with carefully designed decision rules in place, power consumption for the population of loads can be ramped up and down, just like charging and discharging a battery, without any significant impact to consumers' needs. The concept is called Demand Dispatch, and the grid resource obtained from this design virtual energy storage (VES). In order to deploy VES, a balancing authority is faced with two challenges: 1. how to design local decision rules for each load given the target aggregate power consumption (distributed control problem), and 2. how to coordinate a portfolio of resources to maintain grid balance, given a forecast of net-load (resource allocation problem).Rather than separating resource allocation and distributed control, in this paper the two problems are solved simultaneously using a single convex program. The joint optimization model is cast as a finite-horizon optimal control problem in a mean-field setting, based on the new KLQ optimal control approach proposed recently by the authors.The simplicity of the proposed control architecture is remarkable: With a large portfolio of heterogeneous flexible resources, including loads such as residential water heaters, commercial water heaters, irrigation, and utility-scale batteries, the control architecture leads to a single scalar control signal broadcast to every resource in the domain of the balancing authority. Keywords: Smart grids, demand dispatch, distributed control, controlled Markov chains.more » « less
-
null (Ed.)With the growing performance and wide application of deep neural networks (DNNs), recent years have seen enormous efforts on DNN accelerator hardware design for platforms from mobile devices to data centers. The systolic array has been a popular architectural choice for many proposed DNN accelerators with hundreds to thousands of processing elements (PEs) for parallel computing. Systolic array-based DNN accelerators for datacenter applications have high power consumption and nonuniform workload distribution, which makes power delivery network (PDN) design challenging. Server-class multicore processors have benefited from distributed on-chip voltage regulation and heterogeneous voltage regulation (HVR) for improving energy efficiency while guaranteeing power delivery integrity. This paper presents the first work on HVR-based PDN architecture and control for systolic array-based DNN accelerators. We propose to employ a PDN architecture comprising heterogeneous on-chip and off-chip voltage regulators and multiple power domains. By analyzing patterns of typical DNN workloads via a modeling framework, we propose a DNN workload-aware dynamic PDN control policy to maximize system energy efficiency while ensuring power integrity. We demonstrate significant energy efficiency improvements brought by the proposed PDN architecture, dynamic control, and power gating, which lead to a more than five-fold reduction of leakage energy and PDN energy overhead for systolic array DNN accelerators.more » « less
-
This paper proposes a control scheme that prevents the adverse dynamic interactions between the heterogeneously controlled grid-forming inverters (GFMI) in power electronics dominated grid (PEDG) towards a resilient self-driving grid. The primary controller of GFMIs in a grid cluster can vary based on their manufacturers such as virtual synchronous generation, droop control, power synchronization control, etc. Therefore, this can introduce heterogeneity among the network of GFMIs in PEDG. Resultantly, during the interconnection of GFMIs that are based on heterogenous primary controller poses various synchronization and dynamic interaction challenges in PEDG. For instance, severe fluctuations in frequency and voltage, high ROCOF, unintended reactive power circulation that poses a threat on the overall transient stability of the PEDG. Therefore, to mitigate these adverse dynamic interactions among the heterogeneously controlled GFMIs, a force enclaved homogenization (FEH) control is proposed in a supervisory level controller. This will autonomously adjust inertia coefficients of the each GFMI to have homogenous transient response and will enforce coherency among the heterogenous DGs. This will prevent the PEDG from the adverse dynamic interactions during an interconnection and load disturbance. Various case studies are presented that validates the effectiveness of the proposed FEH control.more » « less
