An official website of the United States government
We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in which the active nonlinear element is implemented using an array of rf-SQUIDs. The device is matched to the 50 Ω environment with a Klopfenstein-taper impedance transformer and achieves a bandwidth of 250–300 MHz with input saturation powers up to −95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices, providing a calibration for readout power, an estimation of amplifier added noise, and a platform for comparison against standard impedance matched parametric amplifiers with a single dc-SQUID. We find that the high power rf-SQUID array design has no adverse effect on system noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on amplifier added noise at 1.6 times the quantum limit. Finally, amplifiers with this design show no degradation in readout fidelity due to gain compression, which can occur in multi-tone multiplexed readout with traditional JPAs.
more »
« less
Broadband bandpass Purcell filter for circuit quantum electrodynamics
In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.
more »
« less
- PAR ID:
- 10505902
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- Applied Physics Letters
- Volume:
- 123
- Issue:
- 13
- ISSN:
- 0003-6951
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Interpreting the results of a quantum computer can pose a significant challenge due to inherent noise in these mesoscopic quantum systems. Quantum measurement, a critical component of quantum computing, involves determining the probabilities linked with quantum states post-multiple circuit computations based on quantum readout values provided by hardware. While there are promising classification-based solutions, they can either misclassify or necessitate excessive measurements, thereby proving to be costly. This article puts forth an efficient method to discern the quantum state by analyzing the probability distributions of data post-measurement. Specifically, we employ cumulative distribution functions to juxtapose the measured distribution of a sample against the distributions of basis states. The efficacy of our approach is demonstrated through experimental results on a superconducting transmon qubit architecture, which shows a substantial decrease (88%) in single qubit readout error compared to state-of-the-art measurement techniques. Moreover, we report additional error reduction (12%) compared to state-of-the-art measurement techniques when our technique is applied to enhance existing multi-qubit classification techniques. We also demonstrate the applicability of our proposed method for higher dimensional quantum systems, including classification of single qutrits as well as multiple qutrits.more » « less
-
The ability to make high-fidelity qubit measurements with minimal collateral disruption to the system is not only relevant to initialization and final read-out -- it is also essential to achieving quantum error correction on a universal quantum computation. Qubit state measurements in a neutral atom array are achieved by probing the array with light detuned from a cycling transition and capturing resulting fluorescence with a high quantum efficiency imaging device, producing a greyscale image of the neutral atom array. Conventionally, to achieve a fidelity above 99%, the typical probing period is several ms. This is a significant delay, given that the longest gate operation only takes several micros. In this poster, we demonstrate qubit state measurements assisted by a supervised convolutional neural network (CNN) in a neutral atom quantum processor. We present two CNN architectures for analyzing neutral atom qubit readout data: a compact 5-layer single-qubit CNN architecture and a 6-layer multi-qubit CNN architecture. We benchmark both architectures against a conventional Gaussian threshold analysis method. We demonstrate up to 56% reduction of measurement infidelity using the CNN compared to a conventional analysis method. This work presents a proof of concept for a CNN network to be implemented as a real-time readout processing method on a neutral atom quantum computer, enabling faster readout time and improved fidelity.more » « less
-
We demonstrate high fidelity repetitive projective measurements of nuclear spin qubits in an array of neutral ytterbium-171 (171Yb) atoms. We show that the qubit state can be measured with a fidelity of 0.995(4) under a condition that leaves it in the state corresponding to the measurement outcome with a probability of 0.993(6) for a single tweezer and 0.981(4) averaged over the array. This is accomplished by near-perfect cyclicity of one of the nuclear spin qubit states with an optically excited state under a magnetic field of B=58 G, resulting in a bright/dark contrast of ≈105 during fluorescence readout. The performance improves further as ∼1/B2. The state-averaged readout survival of 0.98(1) is limited by off-resonant scattering to dark states and can be addressed via post-selection by measuring the atom number at the end of the circuit, or during the circuit by performing a measurement of both qubit states. We combine projective measurements with high-fidelity rotations of the nuclear spin qubit via an AC magnetic field to explore several paradigmatic scenarios, including the non-commutivity of measurements in orthogonal bases, and the quantum Zeno mechanism in which measurements "freeze" coherent evolution. Finally, we employ real-time feedforward to repetitively deterministically prepare the qubit in the +z or −z direction after initializing it in an orthogonal basis and performing a projective measurement in the z-basis. These capabilities constitute an important step towards adaptive quantum circuits with atom arrays, such as in measurement-based quantum computation, fast many-body state preparation, holographic dynamics simulations, and quantum error correction.more » « less
-
Abstract High-performance quantum transducers, which faithfully convert quantum information between disparate physical carriers, are essential in quantum science and technology. Different figures of merit, including efficiency, bandwidth, and added noise, are typically used to characterize the transducers’ ability to transfer quantum information. Here we utilize quantum capacity, the highest achievable qubit communication rate through a channel, to define a single metric that unifies various criteria of a desirable transducer. Using the continuous-time quantum capacities of bosonic pure-loss channels as benchmarks, we investigate the optimal designs of generic quantum transduction schemes implemented by transmitting external signals through a coupled bosonic chain. With physical constraints on the maximal coupling rate $${g}_{\max }$$ g max , the highest continuous-time quantum capacity $${Q}^{\max }\approx 31.4{g}_{\max }$$ Q max ≈ 31.4 g max is achieved by transducers with a maximally flat conversion frequency response, analogous to Butterworth electric filters. We further investigate the effect of thermal noise on the performance of transducers.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0161893
