skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • NMR spectroscopic characterization of polyhalodisulfides via sulfenyl chloride inverse vulcanization with sulfur monochloride
Title: NMR spectroscopic characterization of polyhalodisulfides via sulfenyl chloride inverse vulcanization with sulfur monochloride
The preparation of sulfur containing polymers from inexpensive, commodity sulfur base chemicals is an emerging field of polymer chemistry as a route to consume elemental sulfur generated from fossil fuel refining. Recently a new process, termed, sulfenyl chloride inverse vulcanization has been developed that exploits the high reactivity and miscibility of sulfur monochloride, (S2Cl2) with a broad range of allylic monomers to prepare soluble, high molar mass linear polymers, segmented block copolymers and crosslinked thermosets with greater synthetic precision than achieved using classical inverse vulcanization with elemental sulfur. However, the ring opening of episulfonium intermediates from this polymerization can proceed via Markovnikov, anti-Markovnikov, or alternative pathways resulting in complex regioisomeric microstructures, particularly when used with allylic ester monomers. Hence, to accelerate structural characterization of this new class of polyhalodisulfides prepared by the sulfenyl chloride inverse vulcanization process, we report on a detailed structural characterization to quantify the molar composition of regioisomeric units in these materials using NMR spectroscopy,focusing on sulfenyl chloride additions to allylic benzoate substrates. We report on a general methodologyusing one- and two-dimensional NMR spectroscopic techniques to enable direct integration of 2D NMRspectroscopic cross peaks to quantify the molar composition of regioisomeric units in 1,3-diallyl isophthalate(DAI) polymerized with S2Cl2, along with detailed studies on model compound reactions to detail the analytical methodology.  more » « less
Award ID(s):
2201155
PAR ID:
10509689
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Polymer
Volume:
290
Issue:
C
ISSN:
0032-3861
Page Range / eLocation ID:
126539
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Journal of Polymer Science)
    Abstract Organosulfur polymers prepared via the inverse vulcanization of elemental sulfur with olefinic comonomers represent a new class of high‐chalcogenide content organic/inorganic macromolecules. Extensive reporting on new synthetic advances and materials derived from the inverse vulcanization process have been explored in the past decade. However, detailed structural analysis of these sulfur copolymers have not been rigorously conducted, due to the poor solubility of many of these materials, coupled with the numerous side‐reactions that result in complex microstructures from these synthetic methods. In the current report, we revisit analysis of the solution13C NMR spectral data for poly(S‐r‐Sty) and identify for the first time previously unidentified carbon peaks that offer new insights into a corrected repeating unit structure of this sulfur copolymer. 
    more » « less
  2. ; ; ; ; (, Journal of the American Chemical Society)
    The production of elemental sulfur from petroleum refining has created a technological opportunity to increase the valorization of elemental sulfur by the synthesis of high-performance sulfur-based plastics with improved optical, electrochemical, and mechanical properties aimed at applications in thermal imaging, energy storage, self-healable materials, and separation science. In this Perspective, we discuss efforts in the past decade that have revived this area of organosulfur and polymer chemistry to afford a new class of high-sulfur-content polymers prepared from the polymerization of liquid sulfur with unsaturated monomers, termed inverse vulcanization. 
    more » « less
  3. ; ; (, Sustainable Chemistry)
    null (Ed.)
    This paper is review with 119 references. Approaches to supplant currently used plastics with materials made from more sustainably-sourced monomers is one of the great contemporary challenges in sustainable chemistry. Fatty acids are attractive candidates as polymer precursors because they can be affordably produced on all inhabited continents, and they are also abundant as underutilized by-products of other industries. In surveying the array of synthetic approaches to convert fatty acids into polymers, those routes that produce organosulfur polymers stand out as being especially attractive from a sustainability standpoint. The first well-explored synthetic approach to fatty acid-derived organosulfur polymers employs the thiol-ene click reaction or the closely-related thiol-yne variation. This approach is high-yielding under mild conditions with up to 100% atom economy and high functional group tolerance. More recently, inverse vulcanization has been employed to access high sulfur-content polymers by the reaction of fatty acid-derived olefins with elemental sulfur. This approach is attractive not only because it is theoretically 100% atom economical but also because elemental sulfur is itself an underutilized by-product of fossil fuel refining. The thiol-ene, inverse vulcanization, and mechanistically-related thiol-yne and classic vulcanization are therefore discussed as promising routes to access polymers and composites from fatty acid-derived precursors. 
    more » « less
  4. ; (, Materials Advances)
    Herein we report a method for the chemical recycling of poly(ethylene terephthalate) (PET) by a three-stage process employing sustainably-sourced organic materials and industrial byproduct sulfur. In this protocol, PET was subject to glycolysis with diethylene glycol to yield low molecular weight oligomers with hydroxyl end groups. The glycolyzed PET (GPET) was then reacted with oleoyl chloride to yield esterified PET (EPET) containing vulcanizable olefin units. The oligomers constituting GPET and EPET were elucidated by MALDI-TOF spectrometry. EPET underwent inverse vulcanization with elemental sulfur (90 wt%) for 35 min or 24 h to yield xPES or mPES, respectively. The composition, thermal, morphological, thermal and mechanical properties were characterized. The composites exhibited good to excellent mechanical properties that were improved significantly by extending the reaction time from 35 min used to prepare xPES (compressive strength = 10.5 MPa, flexural strength = 2.7 MPa) to 24 h used to prepare mPES (compressive strength = 26.9 MPa, flexural strength = 7.7 MPa). Notably, the compressive and flexural strengths of mPES represent 158% and 208% of the values required for residential building foundations made from traditional materials such as ordinary Portland cement. The three-stage approach delineated herein thus represents a way to mediate chemical recycling of waste plastic with green coreagents to yield composites having mechanical properties competitive with existing commercial structural materials. 
    more » « less
  5. ; ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Optical polymer‐based integrated photonic devices are gaining interest for applications in optical packaging, biosensing, and augmented/virtual reality (AR/VR). The low refractive index of conventional organic polymers has been a barrier to realizing dense, low footprint photonic devices. The fabrication and characterization of integrated photonic devices using a new class of high refractive index polymers, chalcogenide hybrid inorganic/organic polymers (CHIPs), which possess high refractive indices and lower optical losses compared to traditional hydrocarbon‐based polymers, are reported. These optical polymers are derived from elemental sulfur via the inverse vulcanization process, which allows for inexpensive monomers to be used for these materials. A facile fabrication strategy using CHIPs via lithography is described for single‐mode optical waveguides, Y junction splitters, multimode interferometers (MMIs), and high Q factor ring resonators, along with device characterization. Furthermore, propagation losses of 0.4 dB cm−1near 1550 nm wavelength, which is the lowest measured loss in non‐fluorinated optical polymer waveguides, coupled with the benefits of low cost materials and manufacturing are reported. Ring resonators with Q factor on the order of 6 × 104and cavity finesse of 45, which are some of the highest values reported for optical polymer‐based ring resonators, are also reported. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email