An official website of the United States government
Flexoelectricity offers an energy harvesting alternative to piezoelectric materials. Although flexoelectricity is generally weak in most materials, recent findings show that bending a semiconductor with insulating barrier layers could induce a significantly enhanced flexoelectric response. We call this effect the Space Charge Induced Flexoelectric (SCIF) effect. This study explores the induced polarization resulting from free charge redistribution in a doped silicon beam. To understand the underlying physics, a 3D numerical model combining flexoelectric principles and the drift-diffusion theory of semiconduction was developed. The effective flexoelectric coefficient was computed by comparing the differential charge accumulation at the top and bottom of the beam and compared that with the experimental observations.
more »
« less
Space Charge Induced Flexoelectric Transducers for Energy Harvesting
Lead zirconate titanate (PZT) is widely used in energy harvesting because of its excellent material properties. However, as the material contains lead, there are significant environmental concerns with its production and use. Flexoelectricity refers to the coupling between strain gradient and electric polarization that exists, in principle, in all dielectric materials and would allow for energy harvesting without using piezoelectric materials. However, the effect is very weak in most materials. Promisingly, it has recently been shown that space charge polarized materials (i.e., semiconducting materials with insulating barrier layers) can exhibit enhanced flexoelectricity. This space charge induced flexoelectric effect opens up the possibility of a non-toxic replacement for PZT in energy harvesting applications. In this paper we investigate the use of doped silicon with hafnium oxide insulating layers as flexoelectric transducers that could replace PZT in many applications including energy harvesting. Specifically, we experimentally demonstrate flexoelectricity in a bending beam and show an effective flexoelectric coefficient of 4.9 uC/F. Finally, we develop and demonstrate a finite element model for flexoelectricity.
more »
« less
- Award ID(s):
- 2247453
- PAR ID:
- 10512342
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- 2022 21st International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)
- ISBN:
- 978-1-6654-9306-2
- Page Range / eLocation ID:
- 26 to 29
- Format(s):
- Medium: X
- Location:
- Salt Lake City, UT, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Spontaneous polarization as large as ∼28 μC/cm2 was recently observed around the dislocation cores in non-polar SrTiO3 bulk crystals, and its origin was attributed to the flexoelectric effect, i.e., polarization induced by strain gradients. However, the roles of flexoelectricity, relative to other electromechanical contributions, and the nature of dislocations, i.e., edge vs screw dislocations in the induced polarization, are not well understood. In this work, we study the role of flexoelectricity in inducing polarization around three types of dislocation cores in SrTiO3: b=a(100) edge dislocation, b=a(110) edge dislocation, and b=a(010) screw dislocation, where b is the Burgers vector. For the edge dislocations, polarization can be induced by electrostriction alone, while flexoelectricity is essential for stabilizing the symmetric polarization pattern. The shear component of the flexoelectric tensor has a dominant effect on the magnitude and spatial distribution of the flexoelectric polarization. In contrast, no polarization is induced around the b=a(010) screw dislocation through either electrostriction or flexoelectricity. Our findings provide an in-depth understanding of the role of flexoelectricity in inducing polarization around dislocation cores and offer insights into the defect engineering of dielectric/ferroelectric materials.more » « less
-
Advincula, Rigoberto C. (Ed.)Flexoelectricity in multilayer graphene (MLG) buckling can stimulate kink-shaped crinkle formation. In the process, the bifurcation becomes subcritical and the suspended-MLG’s crinkle curvature is localized to a narrow band of ∼2𝑛𝑚 width. We extend the study to flexoelectric layers bonded to a soft elastic substrate. Elastic substrates can guide the morphology of MLG and produce periodic patterns. We show that MLG’s flexoelectricity together with substrate elasticity can produce periodic crinkles, which qualitatively explains the grade-dependent mosaic spreading in highly oriented pyrolytic graphite (HOPG). Experimental measurements of HOPG’s surface-slope variations indeed confirm curvature localization at the crinkle valleys and ridges.more » « less
-
Using a syringe pump setup, the authors conducted water flow experiments through porous reduced graphene oxide (rGO). A variety of anions and cations were added to the water to study its effect on energy harvesting. More specifically, the authors performed tests to study effect of: (1) ion concentration in water, (2) type of anion used, (3) type of cation used, and (4) effect of flow rate. The test data indicates that water flow through rGO networks can directly induce drift of charge carriers in graphene and thus generate electricity. Graphene is ideally suited for this application, since it possesses high mobility charge carriers that are ready to be coupled to moving ions present in the flowing fluid. The proposed rGO material could enable harvesting of the ubiquitous, abundant, and renewable mechanical energy of moving water directly to electrical energy. Unlike traditional schemes, the graphene material directly converts the flow energy into electrical energy without the need for moving parts. Such graphene coatings could potentially replace conventional batteries (which are environmentally hazardous) in low‐power, low‐voltage, and long service‐life applications. Once scaled up, this concept offers a potentially transformative approach to energy harvesting, as opposed to incremental advances in current technologies.more » « less
-
A temperature variation can electrically polarize a pyroelectric material. In its converse manifestation, the electrocaloric effect entails a change in temperature due to the application of an electric field. These phenomena have wide applications ranging from infrared detection sensors and solid-state refrigeration to energy harvesting. However, the pyroelectric–electrocaloric effect is typically observed in certain classes of hard, brittle crystalline materials that must satisfy a stringent set of lattice symmetry conditions. Some limited experiments have however demonstrated that embedding immobile charges and dipoles in soft foams (thus creating an electret state) may lead to a pyroelectric-like response as well as large deformations desired from soft matter. In this work, we develop a systematic theory for coupled electrical, thermal and mechanical responses of soft electrets. Using simple illustrative examples, we derive closed-form explicit expressions for the pyroelectric and electrocaloric coefficients of electrets. While pyroelectricity in electrets has been noted before, our derived expressions provide a clear quantitative basis to interpret (and eventually design) this effect as well as insights into how the geometrically nonlinear deformation and Maxwell stress give rise to its emergence. We present conditions to obtain a larger pyroelectric and electrocaloric response. In particular, the electrocaloric effect is predicted for the first time in such materials and we show that a proper design and a reasonable choice of materials can lead to a temperature reduction of as much as 1.5 K under the application of electrical fields of 10 MV cm −1 .more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/PowerMEMS56853.2022.10007549
