An official website of the United States government
Globally, the production of concrete is responsible for 5% to 8% of anthropogenic CO2 emissions. Cement, a primary ingredient in concrete, forms a glue that holds concrete together when combined with water. Cement embodies approximately 90% of the greenhouse gas emissions associated with concrete production, and decarbonization methods focus primarily on cement production. But mitigation strategies can accrue throughout the concrete life cycle. Decarbonization strategies in cement manufacture, use, and disposal can be rapidly implemented to address the global challenge of equitably meeting societal needs and climate goals. This review describes (a) the development of our reliance on cement and concrete and the consequent environmental impacts, (b) pathways to decarbonization throughout the concrete value chain, and (c) alternative resources that can be leveraged to further reduce emissions while meeting global demands. We close by highlighting a research agenda to mitigate the climate damages from our continued dependence on cement.
more »
« less
The climate benefits from cement carbonation are being overestimated
Abstract Rapid decarbonization of the cement industry is critical to meeting climate goals. Oversimplification of direct air capture benefits from hydrated cement carbonation has skewed the ability to derive decarbonization solutions. Here, we present both global cement carbonation magnitude and its dynamic effect on cumulative radiative forcing. From 1930–2015, models suggest approximately 13.8 billion metric tons (Gt) of CO2was re-absorbed globally. However, we show that the slow rate of carbonation leads to a climate effect that is approximately 60% smaller than these apparent benefits. Further, we show that on a per kilogram (kg) basis, demolition emissions from crushing concrete at end-of-life could roughly equal the magnitude of carbon-uptake during the demolition phase. We investigate the sensitivity of common decarbonization strategies, such as utilizing supplementary cementitious materials, on the carbonation process and highlight the importance of the timing of emissions release and uptake on influencing cumulative radiative forcing. Given the urgency of determining effective pathways for decarbonizing cement, this work provides a reference for overcoming some flawed interpretations of the benefits of carbonation.
more »
« less
- Award ID(s):
- 2033966
- PAR ID:
- 10512707
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 15
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract China, the world’s largest greenhouse gas emitter in 2022, aims to achieve carbon neutrality by 2060. The power sector will play a major role in this decarbonization process due to its current reliance on coal. Prior studies have quantified air quality co-benefits from decarbonization or investigated pathways to eliminate greenhouse gas emissions from the power sector. However, few have jointly assessed the potential impacts of accelerating decarbonization on electric power systems and public health. Additionally, most analyses have treated air quality improvements as co-benefits of decarbonization, rather than a target during decarbonization. Here, we explore future energy technology pathways in China under accelerated decarbonization scenarios with a power system planning model that integrates carbon, pollutant, and health impacts. We integrate the health effects of power plant emissions into the power system decision-making process, quantifying the public health impacts of decarbonization under each scenario. We find that compared with a reference decarbonization pathway, a stricter cap (20% lower emissions than the reference pathway in each period) on carbon emissions would yield significant co-benefits to public health, leading to a 22% reduction in power sector health impacts. Although extra capital investment is required to achieve this low emission target, the value of climate and health benefits would exceed the additional costs, leading to $824 billion net benefits from 2021 to 2050. Another accelerated decarbonization pathway that achieves zero emissions five years earlier than the reference case would result in lower net benefits due to higher capital costs during earlier decarbonization periods. Treating air pollution impacts as a target in decarbonization can further mitigate both CO2emissions and negative health effects. Alternative low-cost solutions also show that small variations in system costs can result in significantly different future energy portfolios, suggesting that diverse decarbonization pathways are viable.more » « less
-
Abstract The distribution of anthropogenic aerosols’ climate effects depends on the geographic distribution of the aerosols themselves. Yet many scientific and policy discussions ignore the role of emission location when evaluating aerosols’ climate impacts. Here, we present new climate model results demonstrating divergent climate responses to a fixed amount and composition of aerosol—emulating China’s present-day emissions—emitted from 8 key geopolitical regions. The aerosols’ global-mean cooling effect is fourteen times greater when emitted from the highest impact emitting region (Western Europe) than from the lowest (India). Further, radiative forcing, a widely used climate response proxy, fails as an effective predictor of global-mean cooling for national-scale aerosol emissions in our simulations; global-mean forcing-to-cooling efficacy differs fivefold depending on emitting region. This suggests that climate accounting should differentiate between aerosols emitted from different countries and that aerosol emissions’ evolving geographic distribution will impact the global-scale magnitude and spatial distribution of climate change.more » « less
-
Abstract Northern peatlands have been a carbon sink since their initiation. This has been simulated by existing process‐based models. However, most of these models are limited by lacking sufficient processes of the N cycle in peatlands. Here, we use a peatland biogeochemistry model incorporated with N‐related processes of fixation, deposition, gas emission, loss through water flow, net mineralization, plant uptake and litterfall to project the role of the peatlands in future radiative forcing (RF). Simulations from 15‐ka BP to 2100 are conducted driven by CMIP5 climate forcing data of IPSL‐CM5A‐LR and bcc‐csm1‐1, including warming scenarios of RCP 2.6, RCP 4.5 and RCP 8.5. During the Holocene, northern peatlands have an increasing cooling effect with RF up to −0.57 W m−2. By 1990, these peatlands accumulate 408 Pg C and 7.8 Pg N. Under warming, increasing mineral N content enhances plant net primary productivity; the cooling effect persists. However, RF increases by 0.1–0.5 W m−2during the 21st century, mainly due to the stimulated CH4emissions. Northern peatlands could switch from a C sink to a source when the annual temperature exceeds −2.2 to −0.5°C. This study highlights that the improved N cycle causes higher CO2‐C sink capacity in northern peatlands. However, it also causes a significant increase in CH4emissions, which weakens the cooling effect of northern peatlands in future climate.more » « less
-
The notion of climate sensitivity has become synonymous with equilibrium climate sensitivity (ECS), or the equilibrium response of the Earth system to a doubling of CO2. But there is a hierarchy of measures of climate sensitivity, which can be arranged in order of increasing complexity and societal relevance and which mirror the historical development of climate modeling. Elements of this hierarchy include the well-known ECS and transient climate response and the lesser-known transient climate response to cumulative emissions and zero emissions commitment. This article describes this hierarchy of climate sensitivities and associated modeling approaches. Key concepts reviewed along the way include climate forcing and feedback, ocean heat uptake, and the airborne fraction of cumulative emissions. We employ simplified theoretical models throughout to encapsulate well-understood aspects of these quantities and to highlight gaps in our understanding and areas for future progress.▪There is a hierarchy of measures of climate sensitivity, which exhibit a range of complexity and societal relevance.▪Equilibrium climate sensitivity is only one of these measures, and our understanding of it may have reached a plateau.▪The more complex measures introduce new quantities, such as ocean heat uptake coefficient and airborne fraction, which deserve increased attention.more » « less
