An official website of the United States government
Statistical confidence in estimates of timber volume, carbon storage, and other forest attributes depends, in part, on the uncertainty in field measurements. Surprisingly, measurement uncertainty is rarely reported, even though national forest inventories routinely repeat field measurements for quality assurance. We compared measurements made by field crews and quality assurance crews in the Forest Inventory and Analysis program of the U.S. Forest Service, using data from 2790 plots and 51 740 trees and saplings across the 24 states of the Northern Region. We characterized uncertainty in 12 national core tree-level variables; seven tree crown variables used in forest health monitoring; three variables describing seedlings; and 11 variables describing the site, such as elevation, slope, and distance from a road. Discrepancies in measurement were generally small but were higher for some variables requiring judgment, such as tree class, decay class, and cause of mortality. When scaled up to states, forest types, or the region, uncertainties in basal area, timber volume, and aboveground biomass were negligible. Understanding all sources of uncertainty is important to designing forest monitoring systems, managing the conduct of the inventory, and assessing the uncertainty of forest attributes required for making regional and national forest policy decisions.
more »
« less
An Accuracy Assessment of Field and Airborne Laser Scanning–Derived Individual Tree Inventories using Felled Tree Measurements and Log Scaling Data in a Mixed Conifer Forest
Abstract On-the-ground sample-based forest inventory methods have been the standard practice for more than a century, however, remote sensing technologies such as airborne laser scanning (ALS) are providing wall-to-wall inventories based on individual tree measurements. In this study, we assess the accuracy of individual tree height, diameter, and volume derived from field-cruising measurements and three ALS data-derived methods in a 1.1 ha stand using direct measurements acquired on felled trees and log-scale volume measurements. Results show that although height derived from indirect conventional field measurements and ALS were statistically equivalent to felled tree height measurements, ALS measured heights had lower root mean square error (RMSE) and bias. Individual tree diameters modeled using a height-to-diameter-at-breast-height model derived from local forest inventory data and the software ForestView had moderate RMSE (8.3–8.5 cm) and bias (-3.0 – -0.3 cm). The ALS-based methods underdetected trees but accounted for 78%–91% of the field reference harvested merchantable volume and 71%–99% of the merchantable volume scaled at the mill. The results also illustrate challenges of using mill-scaled volume estimates as validation data and highlight the need for more research in this area. Overall, the results provide key insights to forest managers on accuracies associated with conventional field-derived and ALS-derived individual tree inventories. Study Implications: Forest inventory data provide critical information for operational decisions and forest product supply chain planning. Traditionally, forest inventories have used field sampling of stand conditions, which is time-intensive and cost-prohibitive to conduct at large spatial scales. Remote sensing technologies such as airborne laser scanning (ALS) provide wall-to-wall inventories based on individual tree measurements. This study advances our understanding of the accuracy of conventional field-derived and ALS-derived individual tree inventories by evaluating these inventories with felled tree and log scaling data. The results provide key insights to forest managers on errors associated with conventional field and ALS-derived individual tree measurements.
more »
« less
- Award ID(s):
- 2316126
- PAR ID:
- 10517071
- Editor(s):
- Roberts, Scott
- Publisher / Repository:
- Society of American Foresters
- Date Published:
- Journal Name:
- Forest Science
- Volume:
- 70
- Issue:
- 3
- ISSN:
- 0015-749X
- Page Range / eLocation ID:
- 228 to 241
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The watershed is forested by typical northern hardwood species (sugar maple, beech and yellow birch) on the lower 90% of its area and by a montane boreal transition forest of red spruce, balsam fir and white birch on the highest 10%. Forest inventory surveys were initiated in 1965, repeated in 1977, and repeated at 5 year intervals after that. This data set includes all inventories from 1965 to 2022 (11 surveys). The inventory consists of a total inventory of all trees ≥10 cm diameter-at-breast-height (dbh) (over 11,000 individual stems overtime) on the whole of the watershed (13.23 ha, 549−792 m in elevation), as measured in each of the 208 grid cells (= plots; 25 m x 25 m, 625 m2). Trees ≥2 to <10 cm dbh were subsampled using a 3 meter wide strip along one edge of each 25 m x 25 m plot. While the specifics of the inventory design varied between watersheds and over time, the core measurements were consistent. Differences between exact inventory methods over time are detailed in the Methods. The surveys include 6000 – 7000 live trees and another 2000-3000 dead standing trees. These data were gathered as part of the Hubbard Brook Ecosystem Study (HBES) and funded largely through the Long-term Ecological Research (LTER) program through NSF since 1988. The HBES is a collaborative effort at the Hubbard Brook Experimental Forest, which is operated and maintained by the USDA Forest Service, Northern Research Station.more » « less
-
Accurate and scalable estimation of forest production is essential for quantifying carbon sequestration, forecasting timber yields, and guiding climate change mitigation strategies. While prior studies established a positive linkage between net primary production (NPP) and canopy structural complexity (CSC) metrics derived from terrestrial LiDAR, the spatial coverage of ground-based surveys is limited. Airborne laser scanning (ALS) could offer a rapid and spatially extensive alternative to terrestrial scanning, but the predictive capacity of ALS-derived CSC metrics for estimating forest production remains insufficiently explored. To address this gap, we derived a suite of three-dimensional (3D) CSC metrics from small-footprint, high-density ALS data collected by the National Ecological Observatory Network’s Airborne Observation Platform. We evaluated relationships between CSC metrics and the NPP of plots nested within seven deciduous and evergreen temperate forests. Optimal metric combinations for predicting NPP within and across forest types were identified using partial least squares regression coupled with recursive feature elimination. ALS-derived CSC metrics explained 77% (RMSE = 11%) and 76% (RMSE = 13%) of the variance in deciduous and evergreen forest plot NPP, respectively. Our findings demonstrate that 3D CSC metrics derived from high-density ALS are robust predictors of plot-level NPP, offering performance comparable to terrestrial scanners while enabling greater scalability and more efficient data acquisition.more » « less
-
Abstract Tree-ring time series provide long-term, annually resolved information on the growth of trees. When sampled in a systematic context, tree-ring data can be scaled to estimate the forest carbon capture and storage of landscapes, biomes, and—ultimately—the globe. A systematic effort to sample tree rings in national forest inventories would yield unprecedented temporal and spatial resolution of forest carbon dynamics and help resolve key scientific uncertainties, which we highlight in terms of evidence for forest greening (enhanced growth) versus browning (reduced growth, increased mortality). We describe jump-starting a tree-ring collection across the continent of North America, given the commitments of Canada, the United States, and Mexico to visit forest inventory plots, along with existing legacy collections. Failing to do so would be a missed opportunity to help chart an evidence-based path toward meeting national commitments to reduce net greenhouse gas emissions, urgently needed for climate stabilization and repair.more » « less
-
This dataset includes field measurements of above-ground biomass made between May and October, 2023 in three locations within the Yukon River Watershed: Huslia, Alaska(AK) (65.700 N, 156.387W), Beaver, AK (66.362 N, 147.398W), and Alakanuk, AK (62.685N, 164.644W). We measured a total of 11,335 trees, distributed in 190 field plots (approximately 10 meter (m) x 10 m). We apply allometric scaling relations to convert measurements of tree diameter to kilograms of dry biomass. We then link these filed measurements of above-ground biomass density to the mean forest canopy height (MCH), derived from airborne Light Detection and Ranging (LiDAR) data. We derive empirical regressions linking MCH to above-ground biomass in each of the field sites, and then apply these empirical relationships to the LiDAR datasets to obtain maps of above-ground biomass density. This dataset includes both the field observations (coordinates, tree type, and tree diameter of the 11,335 inventoried trees) and the processed above-ground biomass maps (georeferenced TIFF files, with a spatial resolution of 10 m).more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1093/forsci/fxae015
