skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on May 14, 2025

Title: Linker-Derived Contortion Controls Performance in Organic Polymer Pseudocapacitors
Pseudocapacitors offer a unique strategy to combine the rapid charging rates of capacitors with the high energy density of batteries, potentially offering a unique solution to energy storage challenges. Bending and twisting aromatic building blocks to form contorted aromatics have emerged as a new strategy to create organic materials with unique and tunable properties. This paper studies the union between these two concepts: molecular contortion and organic pseudocapacitors. The recent development of fully organic pseudocapacitors, including high-performing devices based on perylene diimide organic redox units, introduces the added benefit of low cost, synthetic tunability, and increased flexibility. We synthesize a series of polymers by joining perylene diimide with various linkers that incorporate a helical moiety from [4]helicene to [6]helicene into the molecular backbone. We prepare three new electroactive polymers that incorporate benzene, naphthalene, and anthracene linkers and study their pseudocapacitive performance to infer key design principles for organic pseudocapacitors. Our results show that the naphthalene linker results in the most strongly coupled redox centers and displays the highest pseudocapacitance of 292 ± 47 F/g at 0.5 A/g. To understand the pseudocapacitive behavior, we synthesized dimer model compounds to further probe the electronic structure of these materials through electronic absorption spectroscopy and first-principles calculations. Our results suggest that the identity of the aromatic linker influences the contortion between neighboring perylene diimide units, the coupling between redox centers, and their relative angles and distances. We find that competing molecular design factors must be carefully optimized to generate high-performance devices. Overall, this study provides key insights into molecular design strategies for generating high-performing organic pseudocapacitor materials.  more » « less
Award ID(s):
2304946
PAR ID:
10519247
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
ACS Publications, Chemistry of Materials
Date Published:
Journal Name:
Chemistry of Materials
Volume:
36
Issue:
9
ISSN:
0897-4756
Page Range / eLocation ID:
4861 to 4867
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al ( , Nature Materials)
    null (Ed.)
    Pseudocapacitors harness unique charge-storage mechanisms to enable high-capacity, rapidly cycling devices. Here we describe an organic system composed of perylene diimide and hexaazatrinaphthylene exhibiting a specific capacitance of 689 F g−1 at a rate of 0.5 A g−1, stability over 50,000 cycles, and unprecedented performance at rates as high as 75 A g−1. We incorporate the material into two-electrode devices for a practical demonstration of its potential in next-generation energy-storage systems. We identify the source of this exceptionally high rate charge storage as surface-mediated pseudocapacitance, through a combination of spectroscopic, computational and electrochemical measurements. By underscoring the importance of molecular contortion and complementary electronic attributes in the selection of molecular components, these results provide a general strategy for the creation of organic high-performance energy-storage materials. 
    more » « less
  2. ; ; ; ; ; ; ; ; ( , Journal of Materials Chemistry C)
    null (Ed.)
    Chemical doping is a key process for controlling the electronic properties of molecular semiconductors, including their conductivity and work function. A common limitation of n-doped polymers is their instability under ambient conditions, which has imposed restrictions on the characterisation and device application of n-doped polymers. In this study, sequential n-doping with organometallic dopants was performed on thin films of polymeric semiconductors with naphthalene diimide and perylene diimide-based backbones. Moderate ambient stability was achieved with (RuCp*Mes) 2 , {Cp* = pentamethylcyclopentadienyl; Mes = 1,3,5-trimethylbenzene}, which is in striking contrast to the unstable, n-doped state obtained with cobaltocene, a simple one-electron reductant. The highly cathodic, effective redox potential of (RuCp*Mes) 2 , ca. −2.0 V vs. ferrocene, suppresses the back electron transfer reaction and the subsequent dopant loss in air, which gives rise to the observed air stability. It also allows a perylene diimide-based polymer to be reduced to a state in which the repeat units are largely dianionic. Photoelectron measurements show that the ionization potential of the heavily doped polymer is ca. 3.9 eV. Our findings show that chemical doping with (RuCp*Mes) 2 is an effective method to produce highly stable, n-doped conjugated polymers. 
    more » « less
  3. ; ; ; ( , Chirality)
    Abstract

    Incorporating perylene diimide (PDI) units into helicene structures has become a useful strategy for giving access to non‐planar electron acceptors as well as a method of creating molecules with unique and intriguing chiroptical properties. This minireview describes this fusion of PDIs with helicenes.

     
    more » « less
  4. ; ; ; ; ; ; ( , Chemistry – A European Journal)
    Abstract

    The incorporation of cationic groups onto electron‐poor compounds is a viable strategy for achieving potent electron acceptors, as evidenced by reports of air‐stable radical forms of large aromatic diimides such as naphthalene and perylene diimides. These ions have also been observed to exhibit anion–π interaction tendencies of interest in molecular recognition applications. The benefits of phosphonium incorporation, however, have not yet been extended to the smallest benzene diimides. Here, we report that dibrominated pyromellitic diimide and mellophanic diimide both readily undergo substitution reactions with phosphine sources to yield bisphosphonium compounds. In the single crystalline form, these dications display anion‐π interactions and, in the case of mellophanic diimide, the stabilization of a bromide–water H−bonding ring pattern. The reaction of these dications with chemical reductants readily provides the singly and doubly reduced redox states, which were characterized by UV‐vis spectroscopy and found to exhibit intense absorptions extending into the near‐IR region. Taken together, this work demonstrates that phosphonium incorporation onto congested aromatic diimide scaffolds is synthetically viable and produces unusual electron‐poor compounds.

     
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al ( , Nature Communications)
    Abstract Organic electrochemical transistors are a promising technology for bioelectronic devices, with applications in neuromorphic computing and healthcare. The active component enabling an organic electrochemical transistor is the organic mixed ionic-electronic conductor whose optimization is critical for realizing high-performing devices. In this study, the influence of purity and molecular weight is examined for a p-type polythiophene and an n-type naphthalene diimide-based polymer in improving the performance and safety of organic electrochemical transistors. Our preparative GPC purification reduced the Pd content in the polymers and improved their organic electrochemical transistor mobility by ~60% and 80% for the p- and n-type materials, respectively. These findings demonstrate the paramount importance of removing residual Pd, which was concluded to be more critical than optimization of a polymer’s molecular weight, to improve organic electrochemical transistor performance and that there is readily available improvement in performance and stability of many of the reported organic mixed ionic-electronic conductors. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email