An official website of the United States government
A device incorporating both Rayleigh wave and shear horizontal surface acoustic waves is made on a ST-Quartz substrate. The Rayleigh wave induced microfluidic mixing shows effects on accelerating the binding kinetics of real-time sensing between antibody and antigen, which is measured by phase change from the shear horizontal surface acoustic wave direction on the ST-Quartz. Preliminary results on this device show shortened response time and enhanced phase signal when the binding is accelerated by microfluidic streaming from the Rayleigh wave. The device can be fabricated using a low cost, single step photolithography method and can be combined with a small electronic sensor for data readout, which allows for a variety of surface-based biomarker detections on a portable platform. In this work, detection of Carcinoembryonic antigen (CEA) binding with functionalized capture antibody is studied to show the effects of mass loading amplification due to Rayleigh wave microfluidic streaming.
more »
« less
Acoustic streaming effects on collagen self-assembly
Anisotropic collagen-based biomaterials have gained significant attention in the fields of tissue engineering and regenerative medicine. They have shown great potential for wound dressing, corneal grafting, and exploring the mechanism of cancer cell invasion. Various external physical field-based methods for the fabrication of anisotropic collagen-based biomaterials have been developed, including electrospinning, microfluidic shearing, mechanical loading, and so on. In this study, we put forward an acoustic streaming-based method that uses acoustic wave-induced fluid streaming to control collagen self-assembly and fiber arrangement. Our acoustic device leverages a piezoelectric transducer to generate traveling acoustic waves in fluids, and the wave-fluid interaction further induces fluid streaming, known as acoustic streaming. If the fluid contains collagen macromolecules, the acoustic streaming is able to affect the collagen self-assembly process to create biomaterials containing directionally arranged collagen fibers along the streaming velocity direction. Therefore, this acoustic streaming-based method allows for manufacturing collagen hydrogel layers that contain acoustically arranged collagen fibers and have controlled anisotropic material properties. We performed a series of proof-of-concept experiments by using a fabricated acoustic device to control the self-assembly process of collagens loaded in a Petri dish. Our results show the effectiveness of arranging collagen fibers that follow the flow direction of acoustic streaming. To better understand the collagen manipulation mechanism, we used particle image velocimetry to characterize the acoustic wave-induced fluid streaming. We expect this study can contribute to the fabrication of collagen-based anisotropic biomaterials for biomedical applications.
more »
« less
- PAR ID:
- 10519337
- Editor(s):
- Rizzo, Piervincenzo; Su, Zhongqing; Ricci, Fabrizio; Peters, Kara J
- Publisher / Repository:
- SPIE
- Date Published:
- ISBN:
- 9781510672086
- Page Range / eLocation ID:
- 59
- Format(s):
- Medium: X
- Location:
- Long Beach, United States
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Protein‐based biomaterials have played a key role in tissue engineering, and additional exciting applications as self‐healing materials and sustainable polymers are emerging. Over the past few decades, recombinant expression and production of various fibrous proteins from microbes have been demonstrated; however, the resulting proteins typically must then be purified and processed by humans to form usable fibers and materials. Here, we show that the Gram‐positive bacteriumBacillus subtiliscan be programmed to secrete silk through its translocon via an orthogonal signal peptide/peptidase pair. Surprisingly, we discover that this translocation mechanism drives the silk proteins to assemble into fibers spontaneously on the cell surface, in a process we call secretion‐catalyzed assembly (SCA). Secreted silk fibers form self‐healing hydrogels with minimal processing. Alternatively, the fibers retained on the membrane provide a facile route to create engineered living materials fromBacilluscells. This work provides a blueprint to achieve autonomous assembly of protein biomaterials in useful morphologies directly from microbial factories.more » « less
-
Using analytical results for viscous dissipation in phononic crystals, we calculate the decay coefficient of a sound wave propagating at low frequencies through a two-dimensional phononic crystal with a viscous fluid background. It is demonstrated that the effective acoustic viscosity of the phononic crystal may exceed by two to four orders of magnitude the natural hydrodynamic viscosity of the background fluid. Moreover, the decay coefficient exhibits dependence on the direction of propagation; that is, a homogenized phononic crystal behaves like an anisotropic viscous fluid. Strong dependence on the filling fraction of solid scatterers offers the possibility of tuning the dissipative decay length of sound, which is an important characteristic of any acoustic device. This article is part of the theme issue ‘Wave generation and transmission in multi-scale complex media and structured metamaterials (part 2)’.more » « less
-
Scalable fabrication of two-dimensional (2D) arrays of quantum dots (QDs) and quantum rods (QRs) with nanoscale precision is required for numerous device applications. However, self-assembly–based fabrication of such arrays using DNA origami typically suffers from low yield due to inefficient QD and QR DNA functionalization. In addition, it is challenging to organize solution-assembled DNA origami arrays on 2D device substrates while maintaining their structural fidelity. Here, we reduced manufacturing time from a few days to a few minutes by preparing high-density DNA-conjugated QDs/QRs from organic solution using a dehydration and rehydration process. We used a surface-assisted large-scale assembly (SALSA) method to construct 2D origami lattices directly on solid substrates to template QD and QR 2D arrays with orientational control, with overall loading yields exceeding 90%. Our fabrication approach enables the scalable, high fidelity manufacturing of 2D addressable QDs and QRs with nanoscale orientational and spacing control for functional 2D photonic devices.more » « less
-
Heating of surface acoustic wave (SAW) devices can be utilized for micro-heating and in microreactor applications, but is a disadvantage in biosensing. In this contribution, we fabricate SAW devices in 128° YX LiNbO3 and ST X quartz substrates with same physical dimensions, having center frequencies approximately of 96 MHz and 78 MHz, respectively to study heating at several power levels. We demonstrate droplet heating is caused by acoustic wave streaming resulting from the coupling between fluid and solid. A 10 μm water droplet on a 128° YX LiNbO3 device can be heated up by 3.3 °C with 15 dbm power level, whereas, the ST X quartz device is only heated up by 0.7°C. Our work illustrates that the 128° YX LiNbO3 substrate shows great potential for liquid heating applications. The ST quartz substrate is better suited for removal of non-specifically bound (NSB) proteins in biosensing applications, especially if shear horizontal SAWs propagating in the orthogonal direction are utilized for biosensing.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1117/12.3010033
