skip to main content

Attention:

The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 11:00 PM ET on Friday, November 15 until 2:00 AM ET on Saturday, November 16 due to maintenance. We apologize for the inconvenience.


This content will become publicly available on March 13, 2025

Title: Mechanism of Fermi Level Pinning for Metal Contacts on Molybdenum Dichalcogenide
The high contact resistance of transition metal dichalcogenide (TMD) -based devices is receiving considerable attention due to its limitation on electronic performance. The mechanism of Fermi level (EF) pinning, which causes the high contact resistance, is not thoroughly understood to date. In this study, the metal (Ni and Ag)/Mo-TMDs surfaces and interfaces are characterized by X-ray photoelectron spectroscopy, atomic force microscopy, scanning tunneling microscopy and spectroscopy, and density functional theory systematically. Ni and Ag form covalent and van der Waals (vdW) interfaces on Mo-TMDs, respectively. Imperfections are detected on Mo-TMDs, which leads to electronic and spatial variations. Gap states appear after the adsorption of single, and two metal atoms on Mo-TMDs. The combination of the interface reaction type (covalent or vdW), the imperfection variability of the TMD materials, and the gap states induced by contact metals with different weights are concluded to be the origins of EF pinning.  more » « less
Award ID(s):
2002741
NSF-PAR ID:
10520950
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
American Chemical Society
Date Published:
Journal Name:
ACS Applied Materials & Interfaces
Volume:
16
Issue:
10
ISSN:
1944-8244
Page Range / eLocation ID:
13258 to 13266
Subject(s) / Keyword(s):
transition metal dichalcogenide, metal contact, Fermi level pinning, interface chemistry, band alignment, surface imperfections, adsorption
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Tungsten transition metal dichalcogenides (W-TMDs) are intriguing due to their properties and potential for application in next-generation electronic devices. However, strong Fermi level (EF) pinning manifests at the metal/W-TMD interfaces, which could tremendously restrain the carrier injection into the channel. In this work, we illustrate the origins of EF pinning for Ni and Ag contacts on W-TMDs by considering interface chemistry, band alignment, impurities, and imperfections of W-TMDs, contact metal adsorption mechanism, and the resultant electronic structure. We conclude that the origins of EF pinning at a covalent contact metal/W-TMD interface, such as Ni/W-TMDs, can be attributed to defects, impurities, and interface reaction products. In contrast, for a van der Waals contact metal/TMD system such as Ag/W-TMDs, the primary factor responsible for EF pinning is the electronic modification of the TMDs resulting from the defects and impurities with the minor impact of metal-induced gap states. The potential strategies for carefully engineering the metal deposition approach are also discussed. This work unveils the origins of EF pinning at metal/TMD interfaces experimentally and theoretically and provides guidance on further enhancing and improving the device performance. 
    more » « less
  2. Contact engineering on monolayer layer (ML) semiconducting transition metal dichalcogenides (TMDs) is considered the most challenging problem towards using these materials as a transistor channel in future advanced technology nodes. The typically observed strong Femi level pinning induced in part by the reaction of the source/drain contact metal and the ML TMD frequently results in a large Schottky barrier height, which limits the electrical performance of ML TMD field-effect transistors (FETs). However, at a microscopic level, little is known about how interface defects or reaction sites impact the electrical performance of ML TMD FETs. In this work, we have performed statistically meaningful electrical measurements on at least 120 FETs combined with careful surface analysis to unveil contact resistance dependencies on the interface chemistry. In particular, we achieved a low contact resistance for ML MoS2 FETs with ultra-high vacuum (UHV, 3×10-11 mbar) deposited Ni contacts, ~500 ohm·μm, which is 5 times lower than the contact resistance achieved when deposited at high vacuum (HV, 3×10-6 mbar) conditions. These electrical results strongly correlate with our surface analysis observations. X-ray photoelectron spectroscopy (XPS) revealed significant bonding species between Ni and MoS2 under UHV conditions compared to HV. We also studied the Bi/MoS2 interface under UHV and HV deposition conditions. Different from the case of Ni, we do not observe a difference in contact resistance or interface chemistry between contacts deposited under UHV and HV. Finally, this article also explores the thermal stability and reliability of the two contact metals employed here. 
    more » « less
  3. Abstract

    Two‐dimensional transition metal dichalcogenides (TMDs)/graphene van der Waals (vdW) heterostructures integrate the superior light–solid interaction in TMDs and charge mobility in graphene, and therefore are promising for surface‐enhanced Raman spectroscopy (SERS). Herein, a novel TMD (MoS2and WS2) nanodome/graphene vdW heterostructure SERS substrate, on which an extraordinary SERS sensitivity is achieved, is reported. Using fluorescent Rhodamine 6G (R6G) as probe molecules, the SERS sensitivity is in the range of 10−11to 10−12mon the TMD nanodomes/graphene vdW heterostructure substrates using 532 nm Raman excitation, which is comparable to the best sensitivity reported so far using plasmonic metal nanostructures/graphene SERS substrates, and is more than three orders of magnitude higher than that on single‐layer TMD and graphene substrates. Density functional theory simulation reveals enhanced electric dipole moments and dipole–dipole interaction at the TMD/graphene vdW interface, yielding an effective means to facilitate an external electrostatic perturbation on the graphene surface and charge transfer. This not only promotes chemical enhancement on SERS, but also enables electromagnetic enhancement of SERS through the excitation of localized surface plasmonic resonance on the TMD nanodomes. This TMD nanodome/graphene vdW heterostructure is therefore promising for commercial applications in high‐performance optoelectronics and sensing.

     
    more » « less
  4. Abstract

    The performance of electronic/optoelectronic devices is governed by carrier injection through metal–semiconductor contact; therefore, it is crucial to employ low‐resistance source/drain contacts. However, unintentional introduction of extrinsic defects, such as substoichiometric oxidation states at the metal–semiconductor interface, can degrade carrier injection. In this report, controlling the unintentional extrinsic defect states in layered MoS2is demonstrated using a two‐step chemical treatment, (NH4)2S(aq) treatment and vacuum annealing, to enhance the contact behavior of metal/MoS2interfaces. The two‐step treatment induces changes in the contact of single layer MoS2field effect transistors from nonlinear Schottky to Ohmic behavior, along with a reduction of contact resistance from 35.2 to 5.2 kΩ. Moreover, the enhancement ofIONand electron field effect mobility of single layer MoS2field effect transistors is nearly double forn‐branch operation. This enhanced contact behavior resulting from the two‐step treatment is likely due to the removal of oxidation defects, which can be unintentionally introduced during synthesis or fabrication processes. The removal of oxygen defects is confirmed by scanning tunneling microscopy and X‐ray photoelectron spectroscopy. This two‐step (NH4)2S(aq) chemical functionalization process provides a facile pathway to controlling the defect states in transition metal dichalcogenides (TMDs), to enhance the metal‐contact behavior of TMDs.

     
    more » « less
  5. Recent technology development of logic devices based on 2-D semiconductors such as MoS2, WS2, and WSe2 has triggered great excitement, paving the way to practical applications. Making low-resistance p-type contacts to 2-D semiconductors remains a critical challenge. The key to addressing this challenge is to find high-work function metallic materials which also introduce minimal metal-induced gap states (MIGSs) at the metal/semiconductor interface. In this work, we perform a systematic computational screening of novel metallic materials and their heterojunctions with monolayer WSe2 based on ab initio density functional theory and quantum device simulations. Two contact strategies, van der Waals (vdW) metallic contact and bulk semimetallic contact, are identified as promising solutions to achieving Schottky-barrier-free and low-contact-resistance p-type contacts for WSe2 p-type field-effect transistor (pFETs). Good candidates of p-type contact materials are found based on our screening criteria, including 1H-NbS2, 1H-TaS2, and 1T-TiS2 in the vdW metal category, as well as Co3Sn2S2 and TaP in the bulk semimetal category. Simulations of these new p-type contact materials suggest reduced MIGS, less Fermi-level pinning effect, negligible Schottky barrier height and small contact resistance (down to 20 Ωμm ) 
    more » « less