The production of olefins via on‐purpose dehydrogenation of alkanes allows for a more efficient, selective and lower cost alternative to processes such as steam cracking. Silica‐supported pincer‐iridium complexes of the form [(≡SiO−R4POCOP)Ir(CO)] (R4POCOP=κ3‐C6H3‐2,6‐(OPR2)2) are effective for acceptorless alkane dehydrogenation, and have been shown stable up to 300 °C. However, while solution‐phase analogues of such species have demonstrated high regioselectivity for terminal olefin production under transfer dehydrogenation conditions at or below 240 °C, in open systems at 300 °C, regioselectivity under acceptorless dehydrogenation conditions is consistently low. In this work, complexes [(≡SiO−
Synthesis and reactivity of (Pybox)Os and (Pybox)Ru complexes: Comparison with isoelectronic (Phebox)Ir complexes
Our laboratory has reported that (CX3Phebox)Ir(H)(OAc) (X = H, F) catalysts are highly active for the acceptorless dehydrogenation of n-alkanes1, particularly in the presence of Lewis acids. In this work we report the synthesis of isoelectronic (Pybox)Os(H)(OAc) and (Pybox)Ru(H)(OAc), and investigation of these complexes for alkane dehydrogenation. DFT calculations predict (Pybox)Ru(H)(OAc) to catalyze acceptorless alkane dehydrogenation with a barrier lower than that for (CH3Phebox)Ir(H)(OAc), while the barrier calculated for (Pybox)Os(H)(OAc) is even lower. The rate-limiting step chem. for the catalytic cycle is calculated to be a net M-H/C-H σ-bond metathesis reaction, although expulsion of H2 from the reaction mixture was found to be rate-determining under typical conditions for acceptorless n-alkane dehydrogenation catalyzed by (CF3Phebox)Ir(H)(OAc). H/D exchange experiments were used to probe the kinetics of C-H activation yielding the order of activity: (Pybox)Os(H)(OAc) > (Pybox)Ru(H)(OAc) > (CF3Phebox)Ir(H)(OAc). Exptl. investigation of catalysis by (Pybox)Ru(H)(OAc) and (Pybox)Os(H)(OAc) is still in progress but the Ru complex, unfortunately, does not appear to be stable at the high temperatures required for acceptorless alkane dehydrogenation. We have also reported that (CH3Phebox)Ir(C2H4)2 catalyzes selective dehydrogenative coupling of ethylene to butadiene via an iridacyclopentane complex.2 In this work we used the precursor (Pybox)OsH4 to investigate the same catalytic reaction and appears to result in and analogous dehydrogenative coupling of ethylene to form butadiene via an osmacyclopentane.
more »
« less
- Award ID(s):
- 2117792
- PAR ID:
- 10529823
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Format(s):
- Medium: X
- Location:
- Chicago, IL, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract t Bu4POCOP)Ir(CO)] (1 ) and [(≡SiO−i Pr4PCP)Ir(CO)] (2 ) were synthesized via immobilization of molecular precursors. These complexes were used for gas‐phase butane transfer dehydrogenation using increasingly sterically demanding olefins, resulting in observed selectivities of up to 77 %. The results indicate that the active site is conserved upon immobilization. -
Methane and cyclopropane (c-C3H6) were reacted with Ru+ ions in a room temperature ion trap and the resulting products were identified using a combination of mass spectrometry, IR action spectroscopy, and density functional theory calculations. In the reaction with methane, no products with odd numbers of carbon atoms were located, whereas significant amounts of products with even numbers of carbon atoms were observed. We identified [Ru,2C,4H]+ as the Ru+ ion with an ethene ligand attached, and [Ru,4C,6H]+ as a Ru(η4-cis-1,3-butadiene)+ complex. The barrier toward formation of Ru(C2H4)+ + 2 H2 was calculated at the B3LYP/def2-TZVPPD level to be 0.80 eV above the energy of the ground state Ru+ (4F) + 2 CH4 reactants. In the reaction of c-C3H6 with Ru+, we identified the dehydrogenation product [Ru,3C,4H]+ as Ru(η2-propyne)+, [Ru,2C,2H]+ as Ru+ with an ethyne ligand, and [Ru,5C,5H]+ as Ru(η5-c-C5H5)+ having a cyclopentadienyl ligand.more » « less
-
Metal ligand cooperativity (MLC) has revealed a plethora of unusual reactivity in catalysis in the last couple of decades. Since Milstein's report of aromatization-dearomatization of the pincer backbone of pyridine-based-pincer complexes, ruthenium has played a partic ularly important role in the develo pment of M LC. We have recently reported a (H- P3 )Ir complex which is the fastest known catalyst for alkane-transfer dehydrogenation. The active species results from P- to-Ir migration of H in this system. We further explored the possib ility of MLC in an analogous Ru system. Surprisingly, when metalating the same H-P3 ligand with a RuCl2 precursor we only isolated a (Cl-P3 )Ru(H)Cl complex where H had migrated to Ru from P, and Cl to P from Ru ("P- H/M-X exchange"). We have demonstrated that the thermodynamically favored direction of such exchanges depends strongly on the ancillary ligands, with particular driving force for formation of 5-coordinate (pincer)MHCl complexes (M = d6 metal center) . However, for 6- coordinate Ru complexes (H- pincer)MXYL, the electronic nature of L appears to determine if P-H/M-X exchange occurs. Strongly pi-accepting ligands promote P-X/M-H exchange with the reaction observed for L = CO, xylylisonitrile and N O+ , but not for L = N2 , C H3 CN, or PMe3 . While exchange at 5- coordinate (16e- ) Ru centers appears to proceed through initial P-to-Ru migration of X or H, to give a phosphide interme diate, in the case of 6- coordinate (18e- ) Ru centers exchange is believed to proceed through phosphoranyl intermediates. DFT and intrinsic bond orbital anal. has been used to better understand this reactivity.more » « less
-
null (Ed.)In this study, we show how strong metal–support interaction (SMSI) oxides in Pt–Nb/SiO 2 and Pt–Ti/SiO 2 affect the electronic, geometric and catalytic properties for propane dehydrogenation. Transmission electron microscopy (TEM), CO chemisorption, and decrease in the catalytic rates per gram Pt confirm that the Pt nanoparticles were partially covered by the SMSI oxides. X-ray absorption near edge structure (XANES), in situ X-ray photoelectron spectroscopy (XPS), and resonant inelastic X-ray scattering (RIXS) showed little change in the energy of Pt valence orbitals upon interaction with SMSI oxides. The catalytic activity per mol of Pt for ethylene hydrogenation and propane dehydrogenation was lower due to fewer exposed Pt sites, while turnover rates were similar. The SMSI oxides, however, significantly increase the propylene selectivity for the latter reaction compared to Pt/SiO 2 . In the SMSI catalysts, the higher olefin selectivity is suggested to be due to the smaller exposed Pt ensemble sites, which result in suppression of the alkane hydrogenolysis reaction; while the exposed atoms remain active for dehydrogenation.more » « less
-
more » « less
Abstract The hydrogenolysis of polymers is emerging as a promising approach to deconstruct plastic waste into valuable chemicals. Yet, the complexity of plastic waste, including multilayer packaging, is a significant barrier to handling realistic waste streams. Herein, we reveal fundamental insights into a new chemical route for transforming a previously unaddressed fraction of plastic waste – poly(ethylene‐
co ‐vinyl alcohol) (EVOH) and related polymer blends – into alkane products. We report that Ru/ZrO2is active for the concurrent hydrogenolysis, hydrogenation, and hydrodeoxygenation of EVOH and its thermal degradation products into alkanes (C1−C35) and water. Detailed reaction data, product analysis, and catalyst characterization reveal that the in‐situ thermal degradation of EVOH forms aromatic intermediates that are detrimental to catalytic activity. Increased hydrogen pressure promotes hydrogenation of these aromatics, preventing catalyst deactivation and improving alkane product yields. Calculated apparent rates of C−C scission reveal that the hydrogenolysis of EVOH is slower than low‐density polyethylene. We apply these findings to achieve hydrogenolysis of EVOH/polyethylene blends and elucidate the sensitivity of hydrogenolysis catalysts to such blends. Overall, we demonstrate progress towards efficient catalytic processes for the hydroconversion of waste multilayer film plastic packaging into valuable products.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Proceeding:
- The DOI is not currently available.
