An official website of the United States government
Insects can navigate in cluttered spaces and perform challenging functions such as pollination and collective object transport. By exploiting scaling laws and bioinspired designs, insect‐scale micro‐aerial‐vehicles (MAVs) have demonstrated impressive flight capabilities such as in‐flight collision resilience and acrobatic maneuvers. However, existing subgram MAVs are difficult to design, construct, and repair. Coupled with challenges in robot sensing and control, existing subgram MAVs have not achieved insect‐like swarm flight, which limits potential studies of swarm behaviors and future applications such as collective sensing. Herein, a new design and fabrication method is developed to substantially improve the fabrication scalability of subgram MAVs. Based on a small set of design parameters, an automated algorithm generates the laser cut files of microrobotic components. To reduce fabrication and assembly time, stereolithographic 3D printing is used for making static components such as the airframe and connectors. The modular design enables straightforward assembly and repair, which reduces the overall fabrication time by over 2 times. Owing to the ease of fabrication and good reliability, two subgram MAVs demonstrate controlled hovering flight and coordinated lifting of an object. This result lays the foundation for future robotic studies of collective insect flight.
more »
« less
Acrobatics at the insect scale: A durable, precise, and agile micro–aerial robot
Aerial insects are exceptionally agile and precise owing to their small size and fast neuromotor control. They perform impressive acrobatic maneuvers when evading predators, recovering from wind gust, or landing on moving objects. Flapping-wing propulsion is advantageous for flight agility because it can generate large changes in instantaneous forces and torques. During flapping-wing flight, wings, hinges, and tendons of pterygote insects endure large deformation and high stress hundreds of times each second, highlighting the outstanding flexibility and fatigue resistance of biological structures and materials. In comparison, engineered materials and microscale structures in subgram micro–aerial vehicles (MAVs) exhibit substantially shorter lifespans. Consequently, most subgram MAVs are limited to hovering for less than 10 seconds or following simple trajectories at slow speeds. Here, we developed a 750-milligram flapping-wing MAV that demonstrated substantially improved lifespan, speed, accuracy, and agility. With transmission and hinge designs that reduced off-axis torsional stress and deformation, the robot achieved a 1000-second hovering flight, two orders of magnitude longer than existing subgram MAVs. This robot also performed complex flight trajectories with under 1-centimeter root mean square error and more than 30 centimeters per second average speed. With a lift-to-weight ratio of 2.2 and a maximum ascending speed of 100 centimeters per second, this robot demonstrated double body flips at a rotational rate exceeding that of the fastest aerial insects and larger MAVs. These results highlight insect-like flight endurance, precision, and agility in an at-scale MAV, opening opportunities for future research on sensing and power autonomy.
more »
« less
- Award ID(s):
- 2236708
- PAR ID:
- 10567610
- Publisher / Repository:
- American Association for the Advancement of Science
- Date Published:
- Journal Name:
- Science Robotics
- Volume:
- 10
- Issue:
- 98
- ISSN:
- 2470-9476
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Flapping flight is a commonly used mechanism of micro aerial vehicles and insects alike. Dragonflies use their four-winged anatomy to navigate the environment, maneuver around obstacles, and perform other essential flight patterns. The flight performance and aerodynamics of intact flapping wings is well known; however, this study aims to clarify how wing damage affects the flight performance. First, high speed videos of the damaged wing flight, a takeoff performed by a dragonfly, is captured, and subsequently digitally reconstructed to create a three-dimensional model. Second, using an immersed-boundary method (IBM) based incompressible Navier-Stokes direct numerical simulation (DNS) solver, we resolve the aerodynamic forces and wake topology of the dragonfly’s damaged wing flapping flight in high detail. We found that spanwise damage doesn’t cause any detriment to the force capabilities of the damaged wing which is due to increased pitch angles of the damaged wing. As a consequence, fliers with spanwise damaged and intact wings may be able to utilize similar strategies to achieve takeoffs. The wake topology of the wing damaged flight is also examined. This work serves as a baseline for studying the effect of wing damage for flapping flight and could provide useful insights to micro-aerial vehicle (MAV) designers as some degree of wing damage may be an inevitable occurrence for winged fliers.more » « less
-
Insects maintain remarkable agility after incurring severe injuries or wounds. Although robots driven by rigid actuators have demonstrated agile locomotion and manipulation, most of them lack animal-like robustness against unexpected damage. Dielectric elastomer actuators (DEAs) are a class of muscle-like soft transducers that have enabled nimble aerial, terrestrial, and aquatic robotic locomotion comparable to that of rigid actuators. However, unlike muscles, DEAs suffer local dielectric breakdowns that often cause global device failure. These local defects severely limit DEA performance, lifetime, and size scalability. We developed DEAs that can endure more than 100 punctures while maintaining high bandwidth (>400 hertz) and power density (>700 watt per kilogram)—sufficient for supporting energetically expensive locomotion such as flight. We fabricated electroluminescent DEAs for visualizing electrode connectivity under actuator damage. When the DEA suffered severe dielectric breakdowns that caused device failure, we demonstrated a laser-assisted repair method for isolating the critical defects and recovering performance. These results culminate in an aerial robot that can endure critical actuator and wing damage while maintaining similar accuracy in hovering flight. Our work highlights that soft robotic systems can embody animal-like agility and resilience—a critical biomimetic capability for future robots to interact with challenging environments.more » « less
-
Abstract Insects rely on their olfactory system to forage, prey, and mate. They can sense odorant plumes emitted from sources of their interests with their bilateral odorant antennae, and track down odor sources using their highly efficient flapping-wing mechanism. The odor-tracking process typically consists of two distinct behaviors: surging upwind and zigzagging crosswind. Despite the extensive numerical and experimental studies on the flying trajectories and wing flapping kinematics during odor tracking flight, we have limited understanding of how the flying trajectories and flapping wings modulate odor plume structures. In this study, a fully coupled three-way numerical solver is developed, which solves the 3D Navier-Stokes equations coupled with equations of motion for the passive flapping wings, and the odorant convection-diffusion equation. This numerical solver is applied to investigate the unsteady flow field and the odorant transport phenomena of a fruit fly model in both surging upwind and zigzagging crosswind cases. The unsteady flow generated by flapping wings perturbs the odor plume structure and significantly impacts the odor intensity at the olfactory receptors (i.e., antennae). During zigzagging crosswind flight, the differences in odor perception time and peak odor intensity at the receptors potentially help create stereo odorant mapping to track odor source. Our simulation results will provide new insights into the mechanism of how fruit flies perceive odor landscape and inspire the future design of odor-guided micro aerial vehicles (MAVs) for surveillance and detection missions.more » « less
-
Abstract Flying insects have a robust flight system that allows them to fly even when their forewings are damaged. The insect must adjust wingbeat kinematics to aerodynamically compensate for the loss of wing area. However, the mechanisms that allow insects with asynchronous flight muscle to adapt to wing damage are not well understood. Here, we investigated the phase and amplitude relationships between thorax deformation and flapping angle in tethered flying bumblebees subject to wing clipping and weighting. We used synchronized laser vibrometry and high-speed videography to measure thorax deformation and flapping angle, respectively. We found that changes in wing inertia did not affect thorax deformation amplitude but did influence wingbeat frequency. Increasing wing inertia increased flapping amplitude and caused a phase lag between thorax deformation and flapping angle, whereas decreasing wing inertia did not affect flapping amplitude and caused the flapping angle to lead thorax deformation. Our findings indicate that bumblebees adapt to wing damage by adjusting their wingbeat frequency rather than altering their wing stroke amplitude. Additionally, our results suggest that bumblebees operate near a wing-hinge-dominated resonant frequency, and that moments generated by steering muscles within the wing hinge influence the phase between thorax deformation and wing stroke nontrivially. These insights can inform the design of resilient, insect-inspired flapping-wing micro air vehicles.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1126/scirobotics.adp4256
