An official website of the United States government
The long-term goal of this work is to predict and control the microstructure evolution in metal additive manufacturing processes. In pursuit of this goal, we developed and applied an approach which combines physics-based thermal modeling with data-driven machine learning to predict two important microstructure-related characteristics, namely, the meltpool depth and primary dendritic arm spacing in Nickel Alloy 718 parts made using the laser powder bed fusion (LPBF) process. Microstructure characteristics are critical determinants of functional physical properties, e.g., yield strength and fatigue life. Currently, the microstructure of LPBF parts is optimized through a cumbersome build-and-characterize empirical approach. Rapid and accurate models for predicting microstructure evolution are therefore valuable to reduce process development time and achieve consistent properties. However, owing to their computational complexity, existing physics-based models for predicting the microstructure evolution are limited to a few layers, and are challenging to scale to practical parts. This paper addresses the aforementioned research gap via a novel physics and data integrated modeling approach. The approach consists of two steps. First, a rapid, part-level computational thermal model was used to predict the temperature distribution and cooling rate in the entire part before it was printed. Second, the foregoing physics-based thermal history quantifiers were used as inputs to a simple machine learning model (support vector machine) trained to predict the meltpool depth and primary dendritic arm spacing based on empirical materials characterization data. As an example of its efficacy, when tested on a separate set of samples from a different build, the approach predicted the primary dendritic arm spacing with root mean squared error ≈ 110 nm. This work thus presents an avenue for future physics-based optimization and control of microstructure evolution in LPBF.
more »
« less
Predicting Microstructure Evolution in Laser Powder Bed Fusion Additive Manufacturing Using Physics-Based Machine Learning
Abstract The long-term goal of this work is to predict and control microstructure evolution in metal additive manufacturing processes. As a step towards this goal, the objective of this paper is the rapid prediction of the microstructure evolution in parts made using the laser powder bed fusion (LPBF) additive manufacturing process. To realize this objective, we developed and applied an approach which combines physics-based thermal modeling with data-driven machine learning to predict two important microstructure-related characteristics in Nickel Alloy 718 LPBF-processed parts: meltpool depth and primary dendritic arm spacing (PDAS). Microstructure characteristics are critical determinants of functional physical properties, e.g., yield strength and fatigue life. Currently, the microstructure of laser powder bed fusion parts is optimized through a cumbersome and costly build-and-characterize empirical approach. This makes the development of rapid and accurate models for predicting microstructure evolution practically valuable: these models reduce process development time and enable fabrication of parts with consistent properties. Unfortunately, due to their computational complexity, existing physics-based models for predicting microstructure evolution are limited to only a few layers and are challenging to scale to practical parts. To overcome the drawbacks of current microstructure prediction techniques, this paper establishes a novel physics and data integrated modeling approach. The approach consists of two steps. First, a rapid, part-level computational thermal model was used to predict the temperature distribution and cooling rate in the entire part before it was printed. Second, the foregoing physics-based thermal history quantifiers were used as inputs to a simple machine learning model (support vector machine) trained to predict the meltpool depth and primary dendritic arm spacing based on empirical materials characterization data. As an example of its efficacy, when tested on a separate set of samples from a different build, the approach predicted the PDAS with root mean squared error ≈ 110 nm. The modeling approach was further able to predict meltpool depth with a root mean squared error of 0.012mm. This model performance was validated through the creation of 21 geometries created under 7 different process parameters. Optical and scanning electron microscopy was conducted resulting in more than 1200 primary dendritic arm spacing and meltpool depth measurements. Primary dendritic arm spacing predictions were also validated on parts of a unique geometry created in a separate work. The model was able to successfully transfer to this build without further training, indicating that this method is transferrable to other parts made with laser powder bed fusion and Nickel Alloy 718. This work thus presents an avenue for future physics-based optimization and control of microstructural evolution in laser powder bed fusion.
more »
« less
- PAR ID:
- 10575380
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- ISBN:
- 978-0-7918-8810-0
- Subject(s) / Keyword(s):
- Microstructure Evolution, Meltpool Depth, Thermal Modeling, Physics-based Machine Learning
- Format(s):
- Medium: X
- Location:
- Knoxville, Tennessee, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract In this work, we used in-situ acoustic emission sensors for online monitoring of part quality in laser powder bed fusion (LPBF) additive manufacturing process. Currently, sensors such as thermo-optical imaging cameras and photodiodes are used to observe the laser-material interactions on the top surface of the powder bed. Data from these sensors is subsequently analyzed to detect onset of incipient flaws, e.g., porosity. However, these existing sensing modalities are unable to penetrate beyond the top surface of the powder bed. Consequently, there is a burgeoning need to detect thermal phenomena in the bulk volume of the part buried under the powder, as they are linked to such flaws as support failures, poor surface finish, microstructure heterogeneity, among others. Herein, four passive acoustic emission sensors were installed in the build plate of an EOS M290 LPBF system. Acoustic emission data was acquired during processing of stainless steel 316L samples under differing parameter settings and part design variations. The acoustic emission signals were decomposed using wavelet transforms. Subsequently, to localize the origin of AE signals to specific part features, they were spatially synchronized with infrared thermal images. The resulting spatially localized acoustic emission signatures were statistically correlated (R2 > 85%) to multi-scale aspects of part quality, such as thermal-induced part failures, surface roughness, and solidified microstructure (primary dendritic arm spacing). This work takes a critical step toward in-situ, non-destructive evaluation of multi-scale part quality aspects using acoustic emission sensors.more » « less
-
Abstract This work pertains to the laser powder bed fusion (LPBF) additive manufacturing process. The goal of this work is to mitigate the expense and time required for qualification of laser powder bed fusion processed parts. In pursuit of this goal, the objective of this work is to develop and apply a physics-based model predictive control strategy to modulate the thermal history before the part is built. The key idea is to determine a desired thermal history for a given part a priori to printing using a physics-based model. Subsequently, a model predictive control strategy is developed to attain the desired thermal history by changing the laser power layer-by-layer. This is an important area of research because the spatiotemporal distribution of temperature within the part (also known as the thermal history) influences flaw formation, microstructure evolution, and surface/geometric integrity, all of which ultimately determine the mechanical properties of the part. Currently, laser powder bed fusion parts are qualified using a build-and-test approach wherein parameters are optimized by printing simple test coupons, followed by examining their properties via materials characterization and testing — a cumbersome and expensive process that often takes years. These parameters, once optimized, are maintained constant throughout the process for a part. However, thermal history is a function of over 50 processing parameters including material properties and part design, consequently, the current approach of parameter optimization based on empirical testing of simple test coupons seldom transfers successfully to complex, practical parts. Rather than instinctive process parameter optimization, the model predictive control strategy presents a radically different approach to LPBF part qualification that is based on understanding and modulating the causal thermal physics of the process. The approach has three steps: (Step 1) Predict – given a part geometry, use a rapid, mesh-less physics-based simulation model to predict its thermal history, analyze the predicted thermal history trend, isolate potential red flag problems such as heat buildup, and set a desired thermal history that corrects deleterious trends. (Step 2) Parse – iteratively simulate the thermal history as a function of various laser power levels layer-by-layer over a fixed time horizon. (Step 3) Select – the laser power that provides the closest match to the desired thermal history. Repeat Steps 2 and 3 until the part is completely built. We demonstrate through experiments with various geometries two advantages of this model predictive control strategy when applied to laser powder bed fusion: (i) prevent part failures due to overheating and distortion, while mitigating the need for anchoring supports; and (ii) improve surface integrity of hard to access internal surfaces.more » « less
-
Additive manufacturing (AM) has the potential for improving the sustainability of metal processing through decreased energy and materials usage compared to casting and forging. Laser powder bed fusion (LPBF) of high-temperature alloys such as nickel alloy 718 is one of the key modalities supporting this effort. One of the major drawbacks to LPBF is its slow build speed on the order of 5–10 cubic centimeters per hour print speed. This experimental study investigates how to increase the productivity of the LPBF process by switching from a traditional Gaussian laser shape to a ring laser shape using a nLight multi-modal laser. The objective is to increase productivity, reducing energy consumption and time, without sacrificing mechanical properties by switching to the ring laser thereby improving the sustainability of LPBF. Results include measuring the energy consumption of an Open Additive LPBF system during 718 printing and comparing the microstructure and mechanical properties of the two different lasers.more » « less
-
PurposeThe ability to use laser powder bed fusion (LPBF) to print parts with tailored surface topography could reduce the need for costly post-processing. However, characterizing the as-built surface topography as a function of process parameters is crucial to establishing linkages between process parameters and surface topography and is currently not well understood. The purpose of this study is to measure the effect of different LPBF process parameters on the as-built surface topography of Inconel 718 parts. Design/methodology/approachInconel 718 truncheon specimens with different process parameters, including single- and double contour laser pass, laser power, laser scan speed, build orientation and characterize their as-built surface topography using deterministic and areal surface topography parameters are printed. The effect of both individual process parameters, as well as their interactions, on the as-built surface topography are evaluated and linked to the underlying physics, informed by surface topography data. FindingsDeterministic surface topography parameters are more suitable than areal surface topography parameters to characterize the distinct features of the as-built surfaces that result from LPBF. The as-built surface topography is strongly dependent on the built orientation and is dominated by the staircase effect for shallow orientations and partially fused metal powder particles for steep orientations. Laser power and laser scan speed have a combined effect on the as-built surface topography, even when maintaining constant laser energy density. Originality/valueThis work addresses two knowledge gaps. (i) It introduces deterministic instead of areal surface topography parameters to unambiguously characterize the as-built LPBF surfaces. (ii) It provides a methodical study of the as-built surface topography as a function of individual LPBF process parameters and their interaction effects.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/MSEC2024-125230
