skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Battery Energy Storage Systems: A Review of Energy Management Systems and Health Metrics
With increasing concerns about climate change, there is a transition from high-carbon-emitting fuels to green energy resources in various applications including household, commercial, transportation, and electric grid applications. Even though renewable energy resources are receiving traction for being carbon-neutral, their availability is intermittent. To address this issue to achieve extensive application, the integration of energy storage systems in conjunction with these resources is becoming a recommended practice. Additionally, in the transportation sector, the increased demand for EVs requires the development of energy storage systems that can deliver energy for rigorous driving cycles, with lithium-ion-based batteries emerging as the superior choice for energy storage due to their high power and energy densities, length of their life cycle, low self-discharge rates, and reasonable cost. As a result, battery energy storage systems (BESSs) are becoming a primary energy storage system. The high-performance demand on these BESS can have severe negative effects on their internal operations such as heating and catching on fire when operating in overcharge or undercharge states. Reduced efficiency and poor charge storage result in the battery operating at higher temperatures. To mitigate early battery degradation, battery management systems (BMSs) have been devised to enhance battery life and ensure normal operation under safe operating conditions. Some BMSs are capable of determining precise state estimations to ensure safe battery operation and reduce hazards. Precise estimation of battery health is computed by evaluating several metrics and is a central factor in effective battery management systems. In this scenario, the accurate estimation of the health indicators (HIs) of the battery becomes even more important within the framework of a BMS. This paper provides a comprehensive review and discussion of battery management systems and different health indicators for BESSs, with suitable classification based on key characteristics.  more » « less
Award ID(s):
2304417
PAR ID:
10582624
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
Energies
Date Published:
Journal Name:
Energies
Volume:
17
Issue:
5
ISSN:
1996-1073
Page Range / eLocation ID:
1250
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Optimal power management of battery energy storage systems (BESS) is crucial for their safe and efficient operation. Numerical optimization techniques are frequently utilized to solve the optimal power management problems. However, these techniques often fall short of delivering real-time solutions for large-scale BESS due to their computational complexity. To address this issue, this paper proposes a computationally efficient approach. We introduce a new set of decision variables called power-sharing ratios corresponding to each cell, indicating their allocated power share from the output power demand. We then formulate an optimal power management problem to minimize the system-wide power losses while ensuring compliance with safety, balancing, and power supply-demand match constraints. To efficiently solve this problem, a parameterized control policy is designed and leveraged to transform the optimal power management problem into a parameter estimation problem. We then implement the ensemble Kalman inversion to estimate the optimal parameter set. The proposed approach significantly reduces computational requirements due to 1) the much lower dimensionality of the decision parameters and 2) the estimation treatment of the optimal power management problem. Finally, we conduct extensive simulations to validate the effectiveness of the proposed approach. The results show promise in accuracy and computation time compared with explored numerical optimization techniques. 
    more » « less
  2. Uwe Sauer, Dirk (Ed.)
    A B S T R A C T The probabilistic and intermittent output power of Wind Turbines (WT) is one major inconsistency of these Renewable Energy Sources (RES). Battery Energy Storage Systems (BESS) are a suitable solution to mitigate this intermittency by smoothening WT’s output power. Although the main benefit of BESSs mentions as peak shaving and load-shifting, but in this research, it will verify that optimal placement and sizing them jointly with WTs can lead to more benefits like compensating the required system’s reactive power support from WTs. The reactive power size of WTs and BESSs will be derived from the result of the joint sizing and placement in this study, as well as their active power output to meet the load demand. This can facilitate WTs and BESSs contribution to cover the system’s required reactive power and their participation in the reactive power market and ancillary services. This paper also proposes new cost functions for both WTs and BESSs and minimizes their cost while ensuring minimal total loss (active and reactive) in the power distribution system. This can benefit both WTs’ and BESSs’ owners as well as system operators. Suitable placement and sizing of the WTs and BESSs can also improve the load bus voltage profiles, which can benefit the end-users, and will verify using the proposed optimization by different case studies on the 33 bus distribution system. The results of case studies ascertain the consistency of the proposed formulation for placement and sizing BESSs and WTs jointly, as well as other benefits to the power system, the power plant owners, and system operators. 
    more » « less
  3. Computer systems are operating in environments where applications are rapidly diversifying while resources like energy and storage are becoming severely limited. These environments demand that computers dynamically manage their resources efciently to deliver the best performance and meet many goals. An important challenge in designing computer resource management systems is that computers are structured in multiple modular layers, such as hardware, operating system, and network. Each layer is complex and designed independently without full knowledge of the other layers. Therefore, computers must have modular resource controllers for each layer that are robust to modeling limitations and the uncertainty of inuence from other layers. Existing designs either rely heavily on ad hoc heuristics or lack modularity. We present a design with multiple Structured Singular Value (SSV) controllers from robust control theory for systematic and efcient computer management. On a challenging computer, we build a two-layer SSV control system that signicantly outperforms state-of-the-art heuristics. 
    more » « less
  4. Su, Zhongqing; Limongelli, Maria Pina; Glisic, Branko (Ed.)
    The battery-powered wireless sensor network (WSN) is a promising solution for structural health monitoring (SHM) applications because of its low cost and easy installation capability. However, the long-term WSN operation suffers from various concerns related to uneven battery degradation of wireless sensors, associated battery management, and replacement requirement, and ensuring desired quality of service (QoS) of the WSN in practice. The battery life is one of the biggest limiting factors for long-term WSN operation. Considering the costly maintenance trips for battery replacement, a lack of effective battery degradation management at the system level can lead to a failure in WSN operation. Moreover, the QoS needs to be ensured under various practical uncertainties. Optimal selection with a maximal number of nodes in WSN under uncertainties is a critical task to ensure the desired QoS. This study proposes a reinforcement learning (RL) based framework for active control of the battery degradation at the WSN system level with the aim of the battery group replacement while extending the service life and ensuring the QoS of WSN. A comprehensive simulation environment was developed in a real-life WSN setup, i.e. WSN for a cable-stayed bridge SHM, considering various practical uncertainties. The RL agent was trained under a developed RL environment to learn optimal nodes and duty cycles, meanwhile managing battery health at the network level. In this study, a mode shape-based quality index is proposed for the demonstration. The training and test results showed the prominence of the proposed framework in achieving effective battery health management of the WSN for SHM. 
    more » « less
  5. Energy storage is increasingly important for a diversity of applications. Batteries can be used to store solar or wind energy providing power when the Sun is not shining or wind speed is insufficient to meet power demands. For large scale energy storage, solutions that are both economically and environmentally friendly are limited. Flow batteries are a type of battery technology which is not as well-known as the types of batteries used for consumer electronics, but they provide potential opportunities for large scale energy storage. These batteries have electrochemical recharging capabilities without emissions as is the case for other rechargeable battery technologies; however, with flow batteries, the power and energy are decoupled which is more similar to the operation of fuel cells. This decoupling provides the flexibility of independently designing the power output unit and energy storage unit, which can provide cost and time advantages and simplify future upgrades to the battery systems. One major challenge of the existing commercial flow battery technologies is their limited energy density due to the solubility limits of the electroactive species. Improvements to the energy density of flow batteries would reduce their installed footprint, transportation costs, and installation costs and may open up new applications. This review will discuss the background, current progress, and future directions of one unique class of flow batteries that attempt to improve on the energy density of flow batteries by switching to solid electroactive materials, rather than dissolved redox compounds, to provide the electrochemical energy storage. 
    more » « less