An official website of the United States government
Soft robots, inspired by biological adaptability, can excel where rigid robots may falter and offer flexibility and safety for complex, unpredictable environments. In this paper, we present the Omnidirectional Bending Actuator (OBA), a soft robotic actuation module which is fabricated from off-the-shelf materials with easy scalability and consists of three pneumatic chambers. Distinguished by its streamlined manufacturing process, the OBA is capable of bending in all directions with a high force-to-weight ratio, potentially addressing a notable research gap in knit fabric actuators with multi-degree-of-freedom capabilities. We will present the design and fabrication of the OBA, examine its motion and force capabilities, and demonstrate its capability for stiffness modulation and its ability to maintain set configurations under loads. The mass of the entire actuation module is 278 g, with a range of omnidirectional bending up to 90.80°, a maximum tolerable pressure of 862 kPa, and a bending payload (block force) of 10.99 N, resulting in a force-to-weight ratio of 39.53 N/kg. The OBA’s cost-effective and simple fabrication, compact and lightweight structure, and capability to withstand high pressures present it as an attractive actuation primitive for applications demanding efficient and versatile soft robotic solutions.
more »
« less
Variable damping of pneumatic soft robots with shape memory alloys
Abstract Variable impedance of upper limbs is critical for multifaceted daily activities, adapting to varying physical environments, and facilitating social interactions. Existing soft wearable robots predominantly focus on stiffness modulation, with minimal attention to damping adjustment. In this study, we introduce a novel soft pneumatic actuator integrated with shape memory alloys (SMAs) to achieve significant damping modulation with minimal stiffness variation. By controlling the SMA temperature, the damping of the actuator can be modulated, as demonstrated by experimental evaluations. Under ideal conditions, results showed a maximum damping increase of 140.9% and a maximum decrease of 91.7%, with a maximum stiffness change of only 8%. Phantom arm demonstrations showed up to 76.2% increase in damping ratio, significantly reducing joint oscillation settling times.
more »
« less
- Award ID(s):
- 2221315
- PAR ID:
- 10626185
- Publisher / Repository:
- IOP Publishing
- Date Published:
- Journal Name:
- Smart Materials and Structures
- ISSN:
- 0964-1726
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We present a pneumatic actuator capable of changing length by 1000%, applying both pushing and pulling forces, and independently modulating its length and stiffness. These characteristics are enabled by individually addressable internal and external chambers that work antagonistically against one another. The high deformation with low hysteresis is achieved by wrinkling of thin materials that are assumed to be inextensible but flexible, as opposed to stretchable. A model for the actuator is presented and validated with experimental results, showing capabilities of high strain, pushing and pulling, and independent control of length and stiffness. These charac- teristics are motivated by the application of a compliant truss robot. Accordingly, we show a simple grounded tetrahedron with three actuator elements and three static elements. We demonstrate motion of the tetrahedron apex against external loads and the ability of the structure to vary its stiffness. The actuator offers a unique set of characteristics that could increase the capabilities of soft robotic devices.more » « less
-
Soft continuum manipulators, inspired by squid tentacles and elephant trunks, show promise in allowing robots to safely interact with complex environments. One ongoing problem for these manipulators is torsional stiffness, as continuum manipulators are naturally compliant and cannot actively resist torsional strain. A hybrid actuator that combines molded silicone actuators with 3D printed flexible wave springs is used to overcome this problem. It is shown that the inclusion of the 3D printed wave spring increases actuator torsional stiffness by up to a factor of 10. Further investigation of these structures is performed using both experimentation and simulation. Finally, this hybrid actuator design is used to create a nine‐degree‐of‐freedom soft continuum manipulator, which is used to perform a cantilevered pick‐and‐place task impossible for a traditional soft manipulator of similar size.more » « less
-
Abstract Soft robots composed of elastic materials can exhibit nonlinear behaviors, such as variable stiffness and adaptable deformation, that are favorable to cooperation with humans. These characteristics enable soft robots to be used in multiple applications, ranging from minimally invasive surgery and search and rescue in emergency or hazardous environments to marine or space exploration and assistive devices for people with musculoskeletal disorders. Although soft actuators composed of smart materials have been proposed as a control strategy for soft robots, most studies have focused on traditional actuators using hydraulic or pneumatic pressure. Over the years, these have made a lot of progress, but they have not been able to overcome the limitations of the complex configuration of the system and the expansion of the cross-section of the actuator when contracted. This paper merges the actuator design methodology for smart materials with the mechanical analysis of auxetic structures to present an electrically driven soft actuator architecture that achieves reliable actuation displacements. This novel soft actuator, constructed with contractile SMA springs and flexible auxetic metamaterials (FAM), has a spontaneous recovery of the shape after a contraction, a negative Poisson’s ratio, and over 90% of consistency with the performance predictions at the design stage. Our research presents a methodology for the design of a new electrically driven soft actuator, describes the manufacture of SMA springs and FAM, and concludes with the validation of the design by experimental analysis using the 2D planar soft actuator prototype. Finally, our study revealed that the application of the extraordinary characteristics of smart materials and structures together into a single architecture can be a strategy to overcome the limitations of existing soft actuator studies.more » « less
-
This paper will investigate the effects of pennate angle on fluidic artificial muscle (FAM) bundles for a robot arm motion. Rising interest in soft fluidic actuators exists due to their prospective inherent compliance and safe human-robot interaction. The high force-to-weight ratio, innate flexibility, inexpensive construction, and muscle-like force-contraction behavior of McKibben FAMs make them an attractive type of soft fluidic actuator. Multi-unit architectures found in biological muscles tissues and geometric fiber arrangements have inspired the development of hierarchical actuators to enhance the total actuator performance and increase actuator functionality. Parallel, asymmetric unipennate, and symmetric bipennate are three muscle fiber arrangement types found in human skeletal muscle tissues. Unique characteristics of the pennate muscle tissue, with muscle fibers arranged obliquely from the line of muscle motion, enable passive regulation of effective transmission between the fibers and muscle. Prior studies developed an analytical model based on idealized assumptions to leverage this pennate topology in optimal fiber parameter design for FAM bundles under spatial bounds. The findings showed FAMs in the bipennate topology can be designed to amplify the muscle output force, contraction, and stiffness as compared to that of a parallel topology under equivalent spatial and operating constraints. This work seeks to extend upon previous studies by investigating the effects of pennate angle on actuation and system hydraulic efficiency for a robot arm with a more realistic FAM model. The results will progress toward tailoring actuator topology designs for custom compliant actuation applications.more » « less
