An official website of the United States government
Superparamagnetic tunnel junctions (sMTJs) are emerging as promising components for stochastic units in neuromorphic computing owing to their tunable random switching behavior. Conventional MTJ control methods, such as spin-transfer torque (STT) and spin–orbit torque (SOT), often require substantial power. Here, we introduce the voltage-controlled exchange coupling (VCEC) mechanism, enabling the switching between antiparallel and parallel states in sMTJs with an ultralow power consumption of only 40 nW, approximately 2 orders of magnitude lower than conventional STT-based sMTJs. This mechanism yields a sigmoid-shaped output response, making it ideally suited to neuromorphic computing applications. Furthermore, we validate the feasibility of integrating VCEC with SOT current control, offering an additional dimension for magnetic state manipulation. This work marks the first practical demonstration of the VCEC effect in sMTJs, highlighting its potential as a low-power control solution for probabilistic bits in advanced computing systems.
more »
« less
This content will become publicly available on October 1, 2026
Tunable spintronic devices with different switching mechanisms for probabilistic and stochastic computing
Probabilistic spin logic (PSL) has recently been proposed as a novel computing paradigm that leverages random thermal fluctuations of interacting bodies in a system rather than deterministic switching of binary bits. A PSL circuit is an interconnected network of thermally unstable units called probabilistic bits (p-bits), whose output randomly fluctuates between bits 0 and 1. While the fluctuations generated by p-bits are thermally driven, and therefore, inherently stochastic, the output probability is tunable with an external source. Therefore, information is encoded through probabilities of various configuration of states in the network. Recent studies have shown that these systems can efficiently solve various types of combinatorial optimization problems and Bayesian inference problems that modern computers are unfit for. Previous experimental studies have demonstrated that a single magnetic tunnel junctions (MTJ) designed to be thermally unstable can operate tunable random number generator making it an ideal hardware solution for p-bits. Most proposals for designing an MTJ to operate as a p-bit involve patterning the MTJ as a circular nano-pillar to make the device thermally unstable and then use spin transfer torque (STT) as a tuning mechanism. However, the practical realization of such devices is very challenging since the fluctuation rate of these devices are very sensitive to any device variations or defects caused during fabrication. Despite this challenge, MTJs are still the most promising hardware solution for p-bits because MTJs are very unique in that they can be tuned by multiple other mechanisms such spin orbit torque, magneto-electric coupling, and voltage-controlled exchange coupling. Furthermore, multiple forces can be used simultaneously to drive stochastic switching signals in MTJs. This means there are a large number of methods to tune, or termed as bias, MTJs that can be implemented in p-bit circuits that can alleviate the current challenges of conventional STT driven p-bits. This article serves as a review of all of the different methods that have been proposed to drive random fluctuations in MTJs to operate as a probabilistic bit. Not only will we review the single-biasing mechanisms, but we will also review all the proposed dual-biasing methods, where two independent mechanisms are employed simultaneously. These dual-biasing methods have been shown to have certain advantages such as alleviating the negative effects of device variations and some biasing combinations have a unique capability called ‘two-degrees of tunability’, which increases the information capacity in the signals generated.
more »
« less
- Award ID(s):
- 2230963
- PAR ID:
- 10642808
- Publisher / Repository:
- APS
- Date Published:
- Journal Name:
- Physical Review Applied
- Volume:
- 24
- Issue:
- 4
- ISSN:
- 2331-7019
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
With the rapid advancement of DNNs, numerous Process-in-Memory (PIM) architectures based on various memory technologies (Non-Volatile (NVM)/Volatile Memory) have been developed to accelerate AI workloads. Magnetic Random Access Memory (MRAM) is highly promising among NVMs due to its zero standby leakage, fast write/read speeds, CMOS compatibility, and high memory density. However, existing MRAM technologies such as spin-transfer torque MRAM (STT-MRAM) and spin-orbit torque MRAM (SOT-MRAM), have inherent limitations. STT-MRAM faces high write current requirements, while SOT-MRAM introduces significant area overhead due to additional access transistors. The new STT-assisted-SOT (SAS) MRAM provides an area-efficient alternative by sharing one write access transistor for multiple magnetic tunnel junctions (MTJs). This work presents the first fully digital processing-in-SAS-MRAM system to enable 8-bit floating-point (FP8) neural network inference with an application in on-device session-based recommender system. A SAS-MRAM device prototype is fabricated with 4 MTJs sharing the same SOT metal line. The proposed SAS-MRAM-based PIM macro is designed in TSMC 28nm technology. It achieves 15.31 TOPS/W energy efficiency and 269 GOPS performance for FP8 operations at 700 MHz. Compared to state-of-the-art recommender systems for the same popular YooChoose dataset, it demonstrates a 86 ×, 1.8 ×, and 1.12 × higher energy efficiency than that of GPU, SRAM-PIM, and ReRAM-PIM, respectively.more » « less
-
In this paper, we develop a 6-input fracturable non-volatile Clockless LUT (C-LUT) using spin Hall effect (SHE)-based Magnetic Tunnel Junctions (MTJs) and provide a detailed comparison between the SHE-MTJ-based C-LUT and Spin Transfer Torque (STT)-MTJ-based C-LUT. The proposed C-LUT offers an attractive alternative for implementing combinational logic as well as sequential logic versus previous spin-based LUT designs in the literature. Foremost, C-LUT eliminates the sense amplifier typically employed by using a differential polarity dual MTJ design, as opposed to a static reference resistance MTJ. This realizes a much wider read margin and the Monte Carlo simulation of the proposed fracturable C-LUT indicates no read and write errors in the presence of a variety of process variations scenarios involving MOS transistors as well as MTJs. Additionally, simulation results indicate that the proposed C-LUT reduces the standby power dissipation by $5.4$-fold compared to the SRAM-based LUT. Furthermore, the proposed SHE-MTJ-based C-LUT reduces the area by 1.3-fold and 2-fold compared to the SRAM-based LUT and the STT-MTJ-based C-LUT, respectively.more » « less
-
Abstract Probabilistic (p-) computing is a physics-based approach to addressing computational problems which are difficult to solve by conventional von Neumann computers. A key requirement for p-computing is the realization of fast, compact, and energy-efficient probabilistic bits. Stochastic magnetic tunnel junctions (MTJs) with low energy barriers, where the relative dwell time in each state is controlled by current, have been proposed as a candidate to implement p-bits. This approach presents challenges due to the need for precise control of a small energy barrier across large numbers of MTJs, and due to the need for an analog control signal. Here we demonstrate an alternative p-bit design based on perpendicular MTJs that uses the voltage-controlled magnetic anisotropy (VCMA) effect to create the random state of a p-bit on demand. The MTJs are stable (i.e. have large energy barriers) in the absence of voltage, and VCMA-induced dynamics are used to generate random numbers in less than 10 ns/bit. We then show a compact method of implementing p-bits by using VC-MTJs without a bias current. As a demonstration of the feasibility of the proposed p-bits and high quality of the generated random numbers, we solve up to 40 bit integer factorization problems using experimental bit-streams generated by VC-MTJs. Our proposal can impact the development of p-computers, both by supporting a fully spintronic implementation of a p-bit, and alternatively, by enabling true random number generation at low cost for ultralow-power and compact p-computers implemented in complementary metal-oxide semiconductor chips.more » « less
-
While magnetoresistive random-access memory (MRAM) stands out as a leading candidate for embedded nonvolatile memory and last-level cache applications, its endurance is compromised by substantial self-heating due to the high programming current density. The effect of self-heating on the endurance of the magnetic tunnel junction (MTJ) has primarily been studied in spin-transfer torque (STT)-MRAM. Here, we analyze the transient temperature response of two-terminal spin–orbit torque (SOT)-MRAM with a 1 ns switching current pulse using electro-thermal simulations. We estimate a peak temperature range of 350–450 °C in 40 nm diameter MTJs, underscoring the critical need for thermal management to improve endurance. We suggest several thermal engineering strategies to reduce the peak temperature by up to 120 °C in such devices, which could improve their endurance by at least a factor of 1000× at 0.75 V operating voltage. These results suggest that two-terminal SOT-MRAM could significantly outperform conventional STT-MRAM in terms of endurance, substantially benefiting from thermal engineering. These insights are pivotal for thermal optimization strategies in the development of MRAM technologies.more » « less
