An official website of the United States government
Abstract This paper describes a new method for estimating anisotropic mechanical properties of fibrous soft tissue by imaging shear waves induced by focused ultrasound (FUS) and analyzing their direction-dependent speeds. Fibrous materials with a single, dominant fiber direction may exhibit anisotropy in both shear and tensile moduli, reflecting differences in the response of the material when loads are applied in different directions. The speeds of shear waves in such materials depend on the propagation and polarization directions of the waves relative to the dominant fiber direction. In this study, shear waves were induced in muscle tissue (chicken breast) ex vivo by harmonically oscillating the amplitude of an ultrasound beam focused in a cylindrical tissue sample. The orientation of the fiber direction relative to the excitation direction was varied by rotating the sample. Magnetic resonance elastography (MRE) was used to visualize and measure the full 3D displacement field due to the ultrasound-induced shear waves. The phase gradient (PG) of radially propagating “slow” and “fast” shear waves provided local estimates of their respective wave speeds and directions. The equations for the speeds of these waves in an incompressible, transversely isotropic (TI), linear elastic material were fitted to measurements to estimate the shear and tensile moduli of the material. The combination of focused ultrasound and MR imaging allows noninvasive, but comprehensive, characterization of anisotropic soft tissue.
more »
« less
This content will become publicly available on April 8, 2026
Tensile acoustic rheometry for rapid and contactless characterization of soft viscoelastic biomaterials
Accurately measuring the viscoelastic properties of biomaterials is critical for understanding their functions in biological systems and optimizing their development for specific applications. Conventional methods often require direct physical contact, which hinders longitudinal studies of sterile samples and impose strict requirements in sample preparation. Here, we introduce tensile acoustic rheometry (TAR), a technique for rapid, contactless characterization of soft viscoelastic biomaterials. TAR uses a dual-mode ultrasound approach to apply an upward force impulse, generating oscillatory tensile and compressive motion in a small, free-standing sample (~30 mm3) with its bottom immobilized on a pre-wetted flat surface by capillary stiction. High frequency ultrasound pulse echo detection is employed to track this motion via the movement of the top surface of the sample in real time. In this study, we developed a theoretical framework of the tensile-compression motion of the sample from which Young’s modulus and viscosity of the sample are determined based on the TAR measurements. TAR was validated across a variety of samples, including engineered hydrogels and commercially available natural food products. Results from TAR measurements aligned closely with theoretical predictions, reported values, and shear wave elastography measurements. These findings underscore the versatility and flexibility of TAR as a robust, versatile rheological method for biomaterial characterization with minimal sample preparation requirements.
more »
« less
- Award ID(s):
- 2225568
- PAR ID:
- 10647907
- Publisher / Repository:
- science direct
- Date Published:
- Journal Name:
- Biomaterials
- ISSN:
- 0142-9612
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Dynamic elastography, whether based on magnetic resonance, ultrasound, or optical modalities, attempts to reconstruct quantitative maps of the viscoelastic properties of biological tissue, properties that are altered by disease and injury, by noninvasively measuring mechanical wave motion in the tissue. Most reconstruction strategies that have been developed neglect boundary conditions, including quasistatic tensile or compressive loading resulting in a nonzero prestress. Significant prestress is inherent to the functional role of some biological tissues currently being studied using elastography, such as skeletal and cardiac muscle, arterial walls, and the cornea. In the present article, we review how prestress alters both bulk mechanical wave motion and wave motion in one- and two-dimensional waveguides. Key findings are linked to studies on skeletal muscle and the human cornea, as one- and two-dimensional waveguide examples. This study highlights the underappreciated combined acoustoelastic and waveguide challenge to elastography. Can elastography truly determine viscoelastic properties of a material when what it is measuring is affected by both these material properties and unknown prestress and other boundary conditions?more » « less
-
Abstract Dynamic elastography, whether based on magnetic resonance, ultrasound, or optical modalities, attempts to reconstruct quantitative maps of the viscoelastic properties of biological tissue, properties altered by disease and injury, by noninvasively measuring mechanical wave motion in the tissue. Most reconstruction strategies that have been developed neglect boundary conditions, including quasi-static tensile or compressive loading resulting in a nonzero prestress. Significant prestress is inherent to the functional role of some biological tissues currently being studied using elastography, such as skeletal and cardiac muscle, arterial walls, and the cornea. In the present article a configuration, inspired by muscle elastography but generalizable to other applications, is analytically and experimentally studied. A hyperelastic polymer phantom cylinder is statically elongated in the axial direction while its response to transverse-polarized vibratory excitation is measured. We examine the interplay between uniaxial prestress and waveguide effects in this muscle-like tissue phantom using computational finite element simulations and magnetic resonance elastography measurements. Finite deformations caused by prestress coupled with waveguide effects lead to results that are predicted by a coordinate transformation approach that has been previously used to simplify reconstruction of anisotropic properties using elastography. Here, the approach estimates material viscoelastic properties that are independent of the nonhomogeneous prestress conditions without requiring advanced knowledge of those stress conditions.more » « less
-
Abstract Biomaterials with outstanding mechanical properties, including spider silk, wood, and cartilage, often feature an oriented nanofibrillar structure. The orientation of nanofibrils gives rise to a significant mechanical anisotropy, which is extremely challenging to characterize, especially for microscopically small or inhomogeneous samples. Here, a technique utilizing atomic force microscope indentation at multiple points combined with finite element analysis to sample the mechanical anisotropy of a thin film in a microscopically small area is reported. The system studied here is the tape‐like silk of the Chilean recluse spider, which entirely consists of strictly oriented nanofibrils giving rise to a large mechanical anisotropy. The most detailed directional nanoscale structure–property characterization of spider silk to date is presented, revealing the tensile and transverse elastic moduli as 9 and 1 GPa, respectively, and the binding strength between silk nanofibrils as 159±13 MPa. Furthermore, based on this binding strength, the nanofibrils’ surface energy is derived as 37 mJ m−2, and concludes that van der Waals forces play a decisive role in interfibrillar binding. Due to its versatility, this technique has many potential applications, including early disease diagnostics, as underlying pathological conditions can alter the local mechanical properties of tissues.more » « less
-
Further miniaturization of electronic devices necessitates the introduction of new materials, including piezoelectric thin films, that exhibit electromechanical functionalities without significant degradation in response due to substrate-induced clamping. To identify material systems with superior piezoelectric properties as thin films, simplified and quantitative electromechanical characterization techniques are required. Here, single-beam, laser Doppler vibrometry is used to detect ac electric-field-induced surface displacement in the frequency range 1–100 kHz with low error (around 6% at 10 kHz) and resolution of 0.0003 nm. The technique is used to quantify both electrostriction and piezoelectric responses (surface displacement values <0.05 nm) of various thin films. Requirements for sample geometry and device structures are established and measurement accuracy and resolution are validated against measurements from the literature via synchrotron-based diffraction measurements. A general methodology to measure and extract the piezoelectric coefficients for thin-film samples using finite-element modeling is presented and applied to determine the d33 coefficient and visualize the response in substrate-clamped 50–400-nm-thick PbZr0.52Ti0.48O3 films, especially as compared to bulk versions with the same sample geometry.more » « less
