skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Development of an Energy Management System for a Residential Microgrid in a Power Hardware-in-the-Loop Platform
In this paper, a microgrid scenario composed by a PV generator, a battery system and residential loads in a power Hardware-in-the-Loop (HIL) platform is developed and tested. The electrical structure of the system, the component software modelling and hardware implementation are described. This paper proposes an EMS for microgrid power balance and execution of Time of Use (TOU) and load shedding Demand Response (DR) functions. Experimental results of each component of the scenario are shown.  more » « less
Award ID(s):
1828443
PAR ID:
10107007
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
2019 IEEE PES General Meeting
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, 2017 IEEE Energy Conversion Congress and Exposition (ECCE))
    The challenge of failure management emerges in decentralized architectures due to the distributed nature of the layered control process. Failures in microgrid system may occur at the microgrid level or any of the control layers. A failure detection and response mechanism is required to attain a reliable, fault-tolerant microgrid operation. This paper introduces a Failure Management Unit as an essential function in a microgrid Energy Management System. The proposed unit comprises failure detection mechanisms and a recovery algorithm. The proposed system is applied to a microgrid case study and shows a robust detection and recovery outcome during a system failure. The real-time experimental results were achieved using Hardware-In-the-Loop platform. Coordination between controllers during the recovery period requires low-bandwidth communications, which has no significant overhead on the communication infrastructure. 
    more » « less
  2. ; ; ; ; (, Energies)
    null (Ed.)
    In this paper, we consider a probabilistic microgrid dispatch problem where the predictions of the load and the Renewable Energy Source (RES) generation are given in the form of intervals. A hybrid method combining scenario-selected optimization and reserve strategy using the Model Predictive Control (MPC) framework is proposed. Specifically, first of all, an appropriate scenario is selected by the optimizer at each optimization stage, and then the optimal scheduling and reservation of system capacity are determined based on the selected scenario and possible variations in the future as provided by the predictors. In addition, a new reserve strategy is introduced to adaptively maintain system reliability and respond to variations in the hierarchical microgrid control. Simulations are conducted to compare our proposed method with the existing robust method and the deterministic dispatch with perfect information. Results show that our proposed method significantly improves the system efficiency while maintaining system reliability. 
    more » « less
  3. ; ; ; ; ; (, IEEE Transactions on Industry Applications)
    This article identifies and validates the use of ultrafast silicon carbide (SiC) junction field effect transistor (JFET)-based self-powered solid-state circuit breakers (SSCBs) as the enabling protective device for a 340 Vdc residential dc community microgrid. These SSCBs will be incorporated into a radial distribution system in order to enhance fault discrimination through autonomous operation. Because of the nature and characteristics of short-circuit fault inception in dc microgrids, the time-current trip characteristics of protective devices must be several orders of magnitude faster than conventional circuit breakers. The proposed SSCBs detect short-circuit faults by sensing the sudden voltage rise between its two power terminals and draw power from the fault condition itself to turn off SiC JFETs and then, coordinate with no-load contacts that can isolate the fault. Depending upon the location of the SSCBs in the microgrid, either unidirectional or bidirectional implementations are incorporated. Cascaded SSCBs are tuned using a simple resistor change to enable fault discrimination between upstream high-current feeds and downstream lower current branches. Operation of one of the SSCBs and three in cascaded arrangements are validated both in simulation and with a hardware test platform. Thermal impact on the SSCB is discussed as well. The target application is a residential dc microgrid that will be installed as part of a revitalization effort of an inner city Milwaukee neighborhood. 
    more » « less
  4. ; ; ; (, IEEE Transactions on Smart Grid)
    Reliability enhancement of microgrids is challenged by environmental and operational failures. Centrally controlled microgrids are susceptible to failures at high probability due to a single-point-of-failure, e.g. the central controller. True decentralization of microgrid architecture entails elimination of the central controller, attaining a parallel configuration for the system. In this paper, decentralized microgrid control architecture is proposed as a solution for reliability degradation over the time, and analyzes the reliability aspects of centralized and decentralized control architectures for microgrids. Degree of importance of a single controller in centralized and decentralized architectures is determined and validated by Markov Chain Models (MCM). Results confirm that higher reliability is achieved when true decentralization of control architecture is adopted. Challenges of implementing a true decentralized control architecture are discussed. Hardware-In-the-Loop simulation results for microgrid controller failure scenarios for both architectures are presented and discussed. 
    more » « less
  5. ; ; ; (, Procedia manufacturing)
    null (Ed.)
    This paper addresses a critical question pertaining to manufacturing sustainability: is it economically viable to implement an island microgrid to power a flow shop system under power demand and supply uncertainty? Though many studies on microgrid sizing are available, the majority assume the microgrid is interconnected with main grid. This paper aims to size wind turbine, photovoltaic and battery storage to energize a multi-stage flow shop system in island mode. A mixed-integer, non-linear programming model is formulated to optimize the renewable portfolio and capacity with the goal of minimizing the levelized cost of energy. The island microgrid is tested in three locations with diverse climate profiles. The results show that net zero energy flow shop production is economically feasible in the areas where the average wind speed exceed 8 m/s at 80-meter tower height, or the battery cost drops below $100,000/MWh. Sensitivity analyses are further carried out with respect to installation cost, demand response program, production scalability, and weather seasonality. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email