skip to main content

Explore Research Products in the NSF-PAR

Title: Molecularly-ordered hydrogels with controllable, anisotropic stimulus response
Hydrogels which morph between programmed shapes in response to aqueous stimuli are of significant interest for biosensors and artificial muscles, among other applications. However, programming hydrogel shape change at small size scales is a significant challenge. Here we use the inherent ordering capabilities of liquid crystals to create a mechanically anisotropic hydrogel; when coupled with responsive comonomers, the mechanical anisotropy in the network guides shape change in response to the desired aqueous condition. Our synthetic strategy hinges on the use of a methacrylic chromonic liquid crystal monomer which can be combined with a non-polymerizable chromonic of similar structure to vary the magnitude of shape change while retaining liquid crystalline order. This shape change is directional due to the mechanical anisotropy of the gel, which is up to 50% stiffer along the chromonic stack direction than perpendicular. Additionally, we show that the type of stimulus to which these anisotropic gels respond can be switched by incorporating responsive, hydrophilic comonomers without destroying the nematic phase or alignment. The utility of these properties is demonstrated in polymerized microstructures which exhibit Gaussian curvature in response to high pH due to emergent ordering in a micron-sized capillary.  more » « less
Award ID(s):
1663367
NSF-PAR ID:
10109547
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Soft Matter
Volume:
15
Issue:
22
ISSN:
1744-683X
Page Range / eLocation ID:
4508 to 4517
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ( , Journal of Materials Chemistry B)
    null (Ed.)
    Approaches to control the microstructure of hydrogels enable the control of cell–material interactions and the design of stimuli-responsive materials. We report a versatile approach for the synthesis of anisotropic polyacrylamide hydrogels using lyotropic chromonic liquid crystal (LCLC) templating. The orientational order of LCLCs in a mold can be patterned by controlling surface anchoring conditions, which in turn patterns the polymer network. The resulting hydrogels have tunable pore size and mechanical anisotropy. For example, the elastic moduli measured parallel and perpendicular to the LCLC order are 124.9 ± 6.4 kPa and 17.4 ± 1.1 kPa for a single composition. The resulting anisotropic hydrogels also have 30% larger swelling normal to the LCLC orientation than along the LCLC orientation. By patterning the LCLC order, this anisotropic swelling can be used to create 3D hydrogel structures. These anisotropic gels can also be functionalized with extracellular matrix (ECM) proteins and used as compliant substrata for cell culture. As an illustrative example, we show that the patterned hydrogel microstructure can be used to direct the orientation of cultured human corneal fibroblasts. This strategy to make anisotropic hydrogels has potential for enabling patternable tissue scaffolds, soft robotics, or microfluidic devices. 
    more » « less
  2. ; ( , The Journal of the Acoustical Society of America)
    A vision for soft, autonomous materials entails synthesis of multiple senses in multifunctional materials where material response requires sensitivity to external stimuli. Stimuli-responsive hydrogels are of particular interest for optically induced mechanical response due to the ability to transform external stimuli into large, reversible shape change. Specifically, temperature-responsive hydrogels are broadly used and can be designed to achieve deformation through the photothermal effect as a result of surface plasmonic resonance of gold nanoparticles. Here, a multi-material stimuli-responsive hydrogel network with embedded gold nanoparticles is demonstrated in a unit cell pattern with anisotropic swelling behavior in response to visible light. Reversible, anisotropic swelling leads to bending motion that contributes to the development of soft, autonomous materials. 
    more » « less
  3. ; ; ; ; ( , Crystals)
    null (Ed.)
    Stimuli-responsive materials that exhibit a mechanical response to specific biological conditions are of considerable interest for responsive, implantable medical devices. Herein, we report the synthesis, processing and characterization of oxidation-responsive liquid crystal elastomers that demonstrate programmable shape changes in response to reactive oxygen species. Direct ink writing (DIW) is used to fabricate Liquid Crystal Elastomers (LCEs) with programmed molecular orientation and anisotropic mechanical properties. LCE structures were immersed in different media (oxidative, basic and saline) at body temperature to measure in vitro degradation. Oxidation-sensitive hydrophobic thioether linkages transition to hydrophilic sulfoxide and sulfone groups. The introduction of these polar moieties brings about anisotropic swelling of the polymer network in an aqueous environment, inducing complex shape changes. 3D-printed uniaxial strips exhibit 8% contraction along the nematic director and 16% orthogonal expansion in oxidative media, while printed LCEs azimuthally deform into cones 19 times their original thickness. Ultimately, these LCEs degrade completely. In contrast, LCEs subjected to basic and saline solutions showed no apparent response. These oxidation-responsive LCEs with programmable shape changes may enable a wide range of applications in target specific drug delivery systems and other diagnostic and therapeutic tools. 
    more » « less
  4. ; ; ; ; ; ; ; ; ( , Journal of Materials Chemistry A)
    Inspired by nature, we herein demonstrate a family of multi-responsive hydrogel-based actuators that are encoded with anisotropic swelling behavior to provide rapid and controllable motion. Fabrication of the proposed anisotropy-encoded hydrogel actuators relies on the high resolution stereolithography 3D printing of functionally graded structures made of discrete layers having different volume expansion properties. Three separate synthetic strategies based on (i) asymmetrical distribution of a layer's surface area to volume ratio via mechanical design, (ii) crosslinking density via UV photo-exposure, or (iii) chemical composition via resin vat exchange have been accordingly demonstrated for developing very smooth gradients within the printed hydrogel-based actuator. Our chemomechanical programming enables fast, reversible, repeatable and multimodal bending actuation in response to any immediate environmental change ( i.e. based on osmotic pressure, temperature and pH) from a single printed structure. 
    more » « less
  5. ; ; ; ( , Soft Matter)
    Formation of desired three-dimensional (3D) shapes from flat thin sheets with programmed non-uniform deformation profiles is an effective strategy to create functional 3D structures. Liquid crystal elastomers (LCEs) are of particular use in programmable shape morphing due to their ability to undergo large, reversible, and anisotropic deformation in response to a stimulus. Here we consider a rectangular monodomain LCE thin sheet divided into one high- and one low-temperature strip, which we dub a ‘bistrip’. Upon activation, a discontinuously patterned, anisotropic in-plane stretch profile is generated, and induces buckling of the bistrip into a rolled shape with a transitional bottle neck. Based on the non-Euclidean plate theory, we derive an analytical model to quantitatively capture the formation of the rolled shapes from a flat bistrip with finite thickness by minimizing the total elastic energy involving both stretching and bending energies. Using this analytical model, we identify the critical thickness at which the transition from the unbuckled to buckled configuration occurs. We further study the influence of the anisotropy of the stretch profile on the rolled shapes by first converting prescribed metric tensors with different anisotropy to a unified metric tensor embedded in a bistrip of modified geometry, and then investigating the effect of each parameter in this unified metric tensor on the rolled shapes. Our analysis sheds light on designing shape morphing of LCE thin sheets, and provides quantitative predictions on the 3D shapes that programmed LCE sheets can form upon activation for various applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email