- Award ID(s):
- 1749730
- PAR ID:
- 10141591
- Date Published:
- Journal Name:
- Polymer Chemistry
- Volume:
- 10
- Issue:
- 46
- ISSN:
- 1759-9954
- Page Range / eLocation ID:
- 6290 to 6304
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
null (Ed.)Interpenetrating networks (IPN) comprise two or more networks which are woven but not covalently bonded to each other. This is in contrast to simple, or single Networks (SN), which contain only one network that is covalently crosslinked. This study develops SNs and IPNs using 2-hydroxyethyl acrylate as the monomer and (2-((1-(2-(acryloyloxy)ethyl)-2,5-dioxopyrrolidin-3-yl) thio)ethyl acrylate) (TMMDA) as a thermoresponsive dynamic thiol-Michael crosslinker. In the case of the IPN and SN materials the TMMDA is used as a thermoresponsive linker in each network, since TMMDA undergoes dynamic covalent exchange above 90 °C. In this way the SN and IPNs are kinetically trapped in their as synthesized structures until exposed to thermal stimulus. The focus of this study is to investigate how dynamic bond exchange can modulate material properties, after the material has been synthesized using the SN and IPN materials as model systems. The dynamic nature of the thiol-Michael crosslinker allows the transition of IPNs into SN like structures above 90 °C resulting in similar polymer architecture in both SN and IPN. Surprisingly, upon heating the SN materials also changed their mechanical properties, upon activation of the dynamic thiol-Michael bonds. This enhancement is proposed to occur by thermally activating the thiol-Michael bonds and reducing the number of floppy loops at higher temperature.more » « less
-
null (Ed.)A one pot synthesis is applied to control the chain structure and architecture of multiply dynamic polymers, enabling fine tuning of materials properties by choice of polymer chain length or crosslink density. Macromolecules containing both non-covalent linkers based on quadruple hydrogen-bonded 2-(((6-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl)ureido)hexyl)carbamoyl)oxy)ethyl methacrylate (UPyMA), and thermoresponsive dynamic covalent furan–maleimide based Diels–Alder linkers are explored. The primary polymer's architecture was controlled by reversible addition-fragmentation chain transfer (RAFT) polymerization, with the dynamic non-covalent (UPyMA) and dynamic covalent furfuryl methacrylate (FMA) units incorporated into the same backbone. The materials are crosslinked, taking advantage of the “click” chemistry properties of the furan–maleimide reaction. The polymer materials showed stimulus-responsive thermomechanical properties with a decrosslinking temperature increasing with the polymer's primary chain length and crosslink density. The polymers had good thermally promoted self-healing properties due to the dynamic covalent Diels–Alder bonds. Besides, the materials had excellent stress relaxation characteristics induced by the exchange of the hydrogen bonds in UPyMA units.more » « less
-
Abstract Recent work has demonstrated that temporary crosslinks in polymer networks generated by chemical “fuels” afford materials with large, transient changes in their mechanical properties. This can be accomplished in carboxylic‐acid‐functionalized polymer hydrogels using carbodiimides, which generate anhydride crosslinks with lifetimes on the order of minutes to hours. Here, the impact of the polymer network architecture on the mechanical properties of transiently crosslinked materials was explored. Single networks (SNs) were compared to interpenetrated networks (IPNs). Notably, semi‐IPN precursors that give IPNs on treatment with carbodiimide give much higher fracture energies (i.e., resistance to fracture) and superior resistance to compressive strain compared to other network architectures. A precursor semi‐IPN material featuring acrylic acid in only the free polymer chains yields, on treatment with carbodiimide, an IPN with a fracture energy of 2400 J/m2, a fourfold increase compared to an analogous semi‐IPN precursor that yields a SN. This resistance to fracture enables the formation of macroscopic complex cut patterns, even at high strain, underscoring the pivotal role of polymer architecture in mechanical performance.
-
Abstract Recent work has demonstrated that temporary crosslinks in polymer networks generated by chemical “fuels” afford materials with large, transient changes in their mechanical properties. This can be accomplished in carboxylic‐acid‐functionalized polymer hydrogels using carbodiimides, which generate anhydride crosslinks with lifetimes on the order of minutes to hours. Here, the impact of the polymer network architecture on the mechanical properties of transiently crosslinked materials was explored. Single networks (SNs) were compared to interpenetrated networks (IPNs). Notably, semi‐IPN precursors that give IPNs on treatment with carbodiimide give much higher fracture energies (i.e., resistance to fracture) and superior resistance to compressive strain compared to other network architectures. A precursor semi‐IPN material featuring acrylic acid in only the free polymer chains yields, on treatment with carbodiimide, an IPN with a fracture energy of 2400 J/m2, a fourfold increase compared to an analogous semi‐IPN precursor that yields a SN. This resistance to fracture enables the formation of macroscopic complex cut patterns, even at high strain, underscoring the pivotal role of polymer architecture in mechanical performance.
-
Integration of multiple types of dynamic linkages into one polymer network is challenging and not well understood especially in the design and fabrication of dynamic polymer nanocomposites (DPNs). In this contribution, we present facile methods for synthesizing flexible, healable, conductive, and recyclable thermoresponsive DPNs using three dynamic chemistries playing distinct roles. Dynamic hydrogen bonds account for material flexibility and recycling character. Thiol-Michael exchange accounts for thermoresponsive properties. Diels–Alder reaction leads to covalent bonding between polymer matrix and nanocomposite. Overall, the presence of multiple types of orthogonal dynamic bonds provided a solution to the trade-off between enhanced mechanical performance and material elongation in DPNs. Efficient reinforcement was achieved using <1 wt % multiwalled carbon nanotubes as nanocomposite. Resulting DPNs showed excellent healability with over 3 MPa increase in stress compared to unreinforced materials. Due to multiple responsive dynamic linkages, >90% stress–relaxation was observed with self-healing achieved within 1 h of healing time. Increased mechanical strength, electrical conductivity, and reprocessability were achieved all while maintaining material flexibility and extensibility, hence highlighting the strong promise of these DPNs in the rapidly growing fields of flexible compliant electrodes and strain sensors.more » « less