skip to main content


Title: Efficient and highly tunable second-harmonic generation in Z-cut periodically poled lithium niobate nanowaveguides

Thin-film lithium-niobate-on-insulator (LNOI) has emerged as a superior integrated-photonics platform for linear, nonlinear, and electro-optics. Here we combine quasi-phase-matching, dispersion engineering, and tight mode confinement to realize nonlinear parametric processes with both high efficiency and wide wavelength tunability. On a millimeter-long, Z-cut LNOI waveguide, we demonstrate efficient (1900±<#comment/>500%<#comment/>W−<#comment/>1cm−<#comment/>2) and highly tunable (−<#comment/>1.71nm/K) second-harmonic generation from 1530 to 1583 nm by type-0 quasi-phase-matching. Our technique is applicable to optical harmonic generation, quantum light sources, frequency conversion, and many other photonic information processes across visible to mid-IR spectral bands.

 
more » « less
Award ID(s):
1842680
NSF-PAR ID:
10166472
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Optics Letters
Volume:
45
Issue:
13
ISSN:
0146-9592; OPLEDP
Page Range / eLocation ID:
Article No. 3789
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Materials with strong second-order (χ<#comment/>(2)) optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-lossχ<#comment/>(2)materials remains challenging and limits the threshold power of on-chipχ<#comment/>(2)OPO. Here we report an on-chip lithium niobate optical parametric oscillator at the telecom wavelengths using a quasi-phase-matched, high-quality microring resonator, whose threshold power (∼<#comment/>30µ<#comment/>W) is 400 times lower than that in previousχ<#comment/>(2)integrated photonics platforms. An on-chip power conversion efficiency of 11% is obtained from pump to signal and idler fields at a pump power of 93 µW. The OPO wavelength tuning is achieved by varying the pump frequency and chip temperature. With the lowest power threshold among all on-chip OPOs demonstrated so far, as well as advantages including high conversion efficiency, flexibility in quasi-phase-matching, and device scalability, the thin-film lithium niobate OPO opens new opportunities for chip-based tunable classical and quantum light sources and provides a potential platform for realizing photonic neural networks.

     
    more » « less
  2. Quasi-phase-matched interactions in waveguides with quadratic nonlinearities enable highly efficient nonlinear frequency conversion. In this paper, we demonstrate the first generation of devices that combine the dispersion engineering available in nanophotonic waveguides with quasi-phase-matched nonlinear interactions available in periodically poled lithium niobate (PPLN). This combination enables quasi-static interactions of femtosecond pulses, reducing the pulse energy requirements by several orders of magnitude compared to conventional devices, from picojoules to femtojoules. We experimentally demonstrate two effects associated with second harmonic generation (SHG). First, we observe efficient quasi-phase-matched SHG with<<#comment/>100fJof pulse energy. Second, in the limit of strong phase-mismatch, we observe spectral broadening of both harmonics with as little as 2 pJ of pulse energy. These results lay a foundation for a new class of nonlinear devices, in which coengineering of dispersion with quasi-phase-matching enables efficient nonlinear optics at the femtojoule level.

     
    more » « less
  3. Lithium niobate (LN) has been widely used for second-harmonic generation (SHG) from bulk crystals. Recent studies have reported improved SHG efficiency in LN micro-ring resonators and hybrid waveguiding structures, as well as in LN nanostructures supporting anapole modes and plasmon-assisted dipole resonances. Here we numerically demonstrate that highQ-factor resonances associated with symmetry-protected bound states in the continuum can lead to highly efficient frequency doubling in LN metasurfaces. Simulations show that the radiativeQ-factor and on-resonance field enhancement factor observed in the metasurface are closely dependent on the asymmetric parameterα<#comment/>of the system. Furthermore, highQ-factor resonances boost the SH conversion process in the LN nanostructures. In particular, for a LN metasurface with aQ-factor of∼<#comment/>8×<#comment/>104, a 0.49% peak SH conversion efficiency is achieved at a pump intensity of3.3kW/cm2. This suggests that such highQ-factor LN metasurfaces may be good candidates for practical blue–ultraviolet light sources. Our work provides insight into the possible implementation of metadevices based on nanoengineering of conventional nonlinear crystals.

     
    more » « less
  4. We experimentally show the spectrally averaged nonlinear refractive index and absorption coefficient for liquid water, water vapor,α<#comment/>-pinene, and Si using a full-phase analysis in the terahertz regime through a standard time-domain spectrometer. Our results confirm that the nonlinear index of refraction of the liquid samples in this regime exceeds the near-infrared optical nonlinear index by six orders of magnitude. In the case of liquid water and water vapor at atmospheric pressure, we find a nonlinear index of7.8×<#comment/>10−<#comment/>10cm2/Wand6×<#comment/>10−<#comment/>11cm2/W, respectively, which are both much larger than expected.

     
    more » « less
  5. A novel optical frequency division technique, called regenerative harmonic injection locking, is used to transfer the timing stability of an optical frequency comb with a repetition rate in the millimeter wave range (∼<#comment/>300GHz) to a chip-scale mode-locked laser with a∼<#comment/>10GHzrepetition rate. By doing so, the 300 GHz optical frequency comb is optically divided by a factor of30×<#comment/>to 10 GHz. The stability of the mode-locked laser after regenerative harmonic injection locking is∼<#comment/>10−<#comment/>12at 1 s with a1/τ<#comment/>trend. To facilitate optical frequency division, a coupled opto-electronic oscillator is implemented to assist the injection locking process. This technique is exceptionally power efficient, as it uses less than100µ<#comment/>Wof optical power to achieve stable locking.

     
    more » « less