skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • A two-stage stochastic aggregate production planning model with renewable energy prosumers,” in Proceedings of the 2021 Institute of Industrial and Systems Engineers (IISE) Virtual Conference, May 22-25, 2021, pp. 223-228.
Title: A two-stage stochastic aggregate production planning model with renewable energy prosumers,” in Proceedings of the 2021 Institute of Industrial and Systems Engineers (IISE) Virtual Conference, May 22-25, 2021, pp. 223-228.
This study presents a two-stage stochastic aggregate production planning model to determine the optimal renewable generation capacity, production plan, workforce levels, and machine hours that minimize a production system’s operational cost. The model considers various uncertainties, including demand for final products, machine and labor hours available, and renewable power supply. The goal is to evaluate the feasibility of decarbonizing the manufacturing, transportation, and warehousing operations by adopting onsite wind turbines and solar photovoltaics coupled with battery systems assuming the facilities are energy prosumers. First-stage decisions are the siting and sizing of wind and solar generation, battery capacity, production quantities, hours of labor to keep, hire, or layoff, and regular, overtime, and idle machine hours to allocate over the planning horizon. Second-stage recourse actions include storing products in inventory, subcontracting or backorder, purchasing or selling energy to the main grid, and daily charging or discharging energy in the batteries in response to variable generation. Climate analytics performed in San Francisco and Phoenix permit to derive capacity factors for the renewable energy technologies and test their implementation feasibility. Numerical experiments are presented for three instances: island microgrid without batteries, island microgrid with batteries, and grid-tied microgrid for energy prosumer. Results show favorable levelized costs of energy that are equal to USD48.37/MWh, USD64.91/MWh, and USD36.40/MWh, respectively. The model is relevant to manufacturing companies because it can accelerate the transition towards eco-friendly operations through distributed generation.  more » « less
Award ID(s):
1704933
NSF-PAR ID:
10296920
Author(s) / Creator(s):
; ;
Editor(s):
Ghate, A.; Krishnaiyer, K.; Paynabar, K.
Date Published:
Journal Name:
Proceedings of the 2021 Institute of Industrial and Systems Engineers (IISE) Conference
Page Range / eLocation ID:
223-228
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , Procedia manufacturing)
    null (Ed.)
    This paper addresses a critical question pertaining to manufacturing sustainability: is it economically viable to implement an island microgrid to power a flow shop system under power demand and supply uncertainty? Though many studies on microgrid sizing are available, the majority assume the microgrid is interconnected with main grid. This paper aims to size wind turbine, photovoltaic and battery storage to energize a multi-stage flow shop system in island mode. A mixed-integer, non-linear programming model is formulated to optimize the renewable portfolio and capacity with the goal of minimizing the levelized cost of energy. The island microgrid is tested in three locations with diverse climate profiles. The results show that net zero energy flow shop production is economically feasible in the areas where the average wind speed exceed 8 m/s at 80-meter tower height, or the battery cost drops below $100,000/MWh. Sensitivity analyses are further carried out with respect to installation cost, demand response program, production scalability, and weather seasonality. 
    more » « less
  2. ; ; ( , Journal of cleaner production)
    null (Ed.)
    A variety of methods have been proposed to assist the integration of microgrid in flow shop systems with the goal of attaining eco-friendly operations. There is still a lack of integrated planning models in which renewable portfolio, microgrid capacity and production plan are jointly optimized under power demand and generation uncertainty. This paper aims to develop a two-stage, mixed-integer programming model to minimize the levelized cost of energy of a flow shop powered by onsite renewables. The first stage minimizes the annual energy use subject to a job throughput requirement. The second stage aims at sizing wind turbine, solar panels and battery units to meet the hourly electricity needs during a year. Climate analytics are employed to characterize the stochastic wind and solar capacity factor on an hourly basis. The model is tested in four locations with a wide range of climate conditions. Three managerial insights are derived from the numerical experiments. First, time-of-use tariff significantly stimulates the wind penetration in locations with medium or low wind speed. Second, regardless of the climate conditions, large-scale battery storage units are preferred under time-of-use rate but it is not the case under a net metering policy. Third, wind- and solar-based microgrid is scalable and capable of meeting short-term demand variation and long-term load growth with a stable energy cost rate. 
    more » « less
  3. ; ; ( , International journal of production research)
    Integrating renewable energy into the manufacturing facility is the ultimate key to realising carbon-neutral operations. Although many firms have taken various initiatives to reduce the carbon footprint of their facilities, there are few quantitative studies focused on cost analysis and supply reliability of integrating intermittent wind and solar power. This paper aims to fill this gap by addressing the following question: shall we adopt power purchase agreement (PPA) or onsite renewable generation to realise the eco-economic benefits? We tackle this complex decision-making problem by considering two regulatory options: government carbon incentives and utility pricing policy. A stochastic programming model is formulated to search for the optimal mix of onsite and offsite renewable power supply. The model is tested extensively in different regions under various climatic conditions. Three findings are obtained. First, in a long term onsite generation and PPA can avoid the price volatility in the spot or wholesale electricity market. Second, at locations where the wind speed is below 6 m/s, PPA at $70/MWh is preferred over onsite wind generation. Third, compared to PPA and wind generation, solar generation is not economically competitive unless the capacity cost is down below USD1.5 M per MW. 
    more » « less
  4. ; ; ; ; ( , Journal of Industrial Ecology)
    Summary

    According to previous studies, the life cycle energy intensity of an offshore wind farm (OWF) varies between 0.03 and 0.13 megawatt‐hours (MWh) of primary energy for each MWh of electricity generated. The variation in these life cycle energy intensity studies, after normalizing for capacity factor and life span, is significantly affected by OWF location because of geographical properties, namely, wind speed and water depth. To improve OWF siting, this study investigates how an OWF's distance from shore and geographical location impacts its environmental benefit. A process‐based life cycle assessment is conducted to compare 20 OWF siting scenarios in Michigan's Great Lakes for their cumulative fossil energy demand, global warming potential, and acidification potential. Each scenario (four lake locations at five offshore distances) has unique foundation, transmission, installation, and operational requirements based on site characteristics. The results demonstrate that the cumulative environmental burden from an OWF is most significantly affected by (1) water depth, (2) distance from shore, and (3) distance to power grid, in descending order of importance, if all other site‐relevant variables are held constant. The results also show that when OWFs are sited further offshore, the benefit of increased wind energy generation does not necessarily outweigh the increase in negative environmental impacts. This suggests that siting OWF nearer to shore may result in a better life cycle environmental performance. Finally, we demonstrate how much an OWF's environmental burdens can be reduced if the OWF system is either recycled, transported a shorter distance, or manufactured in a region with a high degree of renewable energy on the grid.

     
    more » « less
  5. ; ; ; ( , 2021 IEEE Kansas Power and Energy Conference (KPEC))
    Battery energy storage systems (BESS) are increasingly deployed in microgrids due to their benefits in improving system reliability and reducing operational costs. Meanwhile, advanced small modular reactors (SMRs) offer many advantages, including relatively small physical footprints, reduced capital investment, and the ability to be sited in locations not possible for larger nuclear plants. In this paper, we propose a bi-level operational planning model that enables microgrid planners to determine the optimal BESS size and technology while taking into account the optimal long-term (a yearly simulation with a 15-min resolution) operations of a microgrid with SMRs and wind turbines. Case studies are performed using realistic BESS and grid data for two BESS technologies, i.e., Li-Ion battery and compressed air energy storage. Numerical results show the effectiveness of the proposed bi-level model. The pros and cons of the two BESS technologies are also revealed. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email