skip to main content


Title: Big images of two-dimensional pseudorepresentations
Bellaïche has recently applied Pink-Lie theory to prove that, under mild conditions, the image of a continuous 2-dimensional pseudorepresentation ρ of a profinite group on a local pro- p domain A contains a nontrivial congruence subgroup of SL2(B) for a certain subring B of A. We enlarge Bellaïche’s ring and give this new B a conceptual interpretation both in terms of conjugate self-twists of ρ, symmetries that constrain its image, and in terms of the adjoint trace ring of ρ, which we show is both more natural and the optimal ring for these questions in general. Finally, we use our purely algebraic result to recover and extend a variety of arithmetic big-image results for GL2-Galois representations arising from elliptic, Hilbert, and Bianchi modular forms and p-adic Hida or Coleman families of elliptic and Hilbert modular forms.  more » « less
Award ID(s):
1703834
NSF-PAR ID:
10319140
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Mathematische Annalen
ISSN:
0025-5831
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract The Hilbert class polynomial has as roots the j -invariants of elliptic curves whose endomorphism ring is a given imaginary quadratic order. It can be used to compute elliptic curves over finite fields with a prescribed number of points. Since its coefficients are typically rather large, there has been continued interest in finding alternative modular functions whose corresponding class polynomials are smaller. Best known are Weber’s functions, which reduce the size by a factor of 72 for a positive density subset of imaginary quadratic discriminants. On the other hand, Bröker and Stevenhagen showed that no modular function will ever do better than a factor of 100.83. We introduce a generalization of class polynomials, with reduction factors that are not limited by the Bröker–Stevenhagen bound. We provide examples matching Weber’s reduction factor. For an infinite family of discriminants, their reduction factors surpass those of all previously known modular functions by a factor at least 2. 
    more » « less
  2. The link between modular functions and algebraic functions was a driving force behind the 19th century study of both. Examples include the solutions by Hermite and Klein of the quintic via elliptic modular functions and the general sextic via level 2 hyperelliptic functions. This paper aims to apply modern arithmetic techniques to the circle of “resolvent problems” formulated and pursued by Klein, Hilbert and others. As one example, we prove that the essential dimension at 𝑝=2 for the symmetric groups 𝑆𝑛 is equal to the essential dimension at 2 of certain 𝑆𝑛-coverings defined using moduli spaces of principally polarized abelian varieties. Our proofs use the deformation theory of abelian varieties in characteristic p, specifically Serre-Tate theory, as well as a family of remarkable mod 2 symplectic 𝑆𝑛-representations constructed by Jordan. As shown in an appendix by Nate Harman, the properties we need for such representations exist only in the 𝑝=2 case. In the second half of this paper we introduce the notion of ℰ-versality as a kind of generalization of Kummer theory, and we prove that many congruence covers are ℰ-versal. We use these ℰ-versality result to deduce the equivalence of Hilbert’s 13th Problem (and related conjectures) with problems about congruence covers. 
    more » « less
  3. Abstract False theta functions form a family of functions with intriguing modular properties and connections to mock modular forms. In this paper, we take the first step towards investigating modular transformations of higher rank false theta functions, following the example of higher depth mock modular forms. In particular, we prove that under quite general conditions, a rank two false theta function is determined in terms of iterated, holomorphic, Eichler-type integrals. This provides a new method for examining their modular properties and we apply it in a variety of situations where rank two false theta functions arise. We first consider generic parafermion characters of vertex algebras of type $$A_2$$ A 2 and $$B_2$$ B 2 . This requires a fairly non-trivial analysis of Fourier coefficients of meromorphic Jacobi forms of negative index, which is of independent interest. Then we discuss modularity of rank two false theta functions coming from superconformal Schur indices. Lastly, we analyze $${\hat{Z}}$$ Z ^ -invariants of Gukov, Pei, Putrov, and Vafa for certain plumbing $$\mathtt{H}$$ H -graphs. Along the way, our method clarifies previous results on depth two quantum modularity. 
    more » « less
  4. Abstract

    We analyse the case of a dense modified Korteweg–de Vries (mKdV) soliton gas and its large time behaviour in the presence of a single trial soliton. We show that the solution can be expressed in terms of Fredholm determinants as well as in terms of a Riemann–Hilbert problem. We then show that the solution can be decomposed as the sum of the background gas solution (a modulated elliptic wave), plus a soliton solution: the individual expressions are however quite convoluted due to the interaction dynamics. Additionally, we are able to derive the local phase shift of the gas after the passage of the soliton, and we can trace the location of the soliton peak as the dynamics evolves. Finally, we show that the soliton peak, while interacting with the soliton gas, has an oscillatory velocity whose leading order average value satisfies the kinetic velocity equation analogous to the one posited by V. Zakharov and G. El.

     
    more » « less
  5. The recent development of three-dimensional graphic statics (3DGS) has greatly increased the ease of designing complex and efficient spatial funicular structural forms [1]. The reciprocal diagram based 3DGS approaches not only generate highly efficient funicular structures [2], but also result in planarity constraints due to the polyhedron nature of the reciprocal diagrams [3]. Our previous research has shown the feasibility of leveraging this planarity by using planar glass sheets to materialize the 10m-span, double-layer glass bridge [3]. This paper is framed as a proof of concept for the 10m bridge and explores the form-finding, detail configuration, fabrication constraints, and assembly logic by designing and constructing a small-scale bridge prototype with a span of 2.5m. The prototype is designed in a modular approach, where each polyhedral cell of the form is materialized using a hollow glass unit (HGU) (Figure 1a), which can be prefabricated and preassembled, and therefore, greatly simplifies the assembly of the whole bridge. The compression-only form of the prototype is generated using the PolyFrame beta [4] plug-in for Rhinoceros [5]. The form-finding is carried out with a comprehensive consideration of a variety of parameters, including fabrication constraints, assembly ease, construction cost, and practicality. To start the form-finding process, a group of closed convex force polyhedrons is aggregated, controlling the topology of the form diagram and the orientations of the form elements. By manipulating the face tilting angles of the force diagram, the supported edges at the end of the bridge are all made horizontal, reducing the difficulty of the support design. Then, vertex locations and edge lengths of the form diagram are constrained, determining the final dimensions of both the bridge and the cells. After getting the geometry of the bridge, the detail developments are streamlined. Each of the 13 HGUs consists of two flat deck plates and a series of side plates (Figure 1b). To interlock the adjacent cells and prevent possible sliding, a male-female connection mechanism is introduced to the conjoint side plates of the HGUs (Figure 1b). Additionally, to eliminate the direct contact of the glass parts and prevent the stress concentration, two softer transparent materials are involved for connecting purposes. Within each HGU, silicon-based binding agent is used to hold the glass parts together; between the neighboring HGUs, plastic sheets are placed as interface materials (Figure 1b). Figure 1. a) The 2.5m-span small-scale prototype dome, b) Exploded view showing deck plates, side plates, male-female connection, and interface material For the fabrication of the glass parts, 5-axis Waterjet cutting techniques are applied. While the glass sheets for the deck plates can be purchased from the market, the irregular side plates with male-female connections need to be made from kiln-cast glass. In terms of the Waterjet cutting constraints, there is a max cutting angle of 60 degrees from vertical. With respect to this, all the glass parts are examined during the design process to ensure they all satisfy the cutting angle requirements. Aiming to achieve a fast and precise assembly, several assistant techniques are developed. On the local HGU level, assembly connectors are designed and 3D-printed to help locate the glass parts. On the global prototype level, the assembly sequence of the HGUs are simulated to avoid interference. Besides, a labeling system is also established to organize the fabricated parts and guide the entire assembly process. The design and construction of this small-scale prototype provide important information for the future development of the full-scale bridge regarding the interlocking detail design, the fabrication constraints, and assembly logic. The actual structural performance of the prototype awaits further investigation through-loading experiments. 
    more » « less