Distributed acoustic sensing (DAS) is a relatively new technology for recording the propagation of seismic waves, with promising applications in both engineering and geophysics. DAS's ability to simultaneously collect high spatial resolution waveforms over long arrays suggests that it is well-suited for near-surface imaging applications such as 2-D multichannel analysis of surface waves (MASWs), which require, at a minimum, long, linear arrays of single-component receivers. The 2-D MASW method uses a large number of sensor subarrays deployed along a linear alignment to produce 1-D shear-wave velocity (VS) profiles beneath each subarray. The 1-D VS profiles are then combined to form a pseudo-2-D VS image beneath the entire linear alignment that can be used for the purpose of identifying and characterizing lateral variations in subsurface layering. Traditionally, 2-D MASW is conducted using arrays consisting of either 24 or 48 geophones. While additional receivers could easily be incorporated into the testing configuration, it is rare for researchers and practitioners to have access to greater numbers of seismographs and geophones. When a limited number of geophones are available for deployment, there is a need to pre-determine the geophone spacing and subarray length prior to field data acquisition. Studies examining how the choice of subarray geometry impacts the resulting pseudo-2-D VS cross-sections have been largely limited to synthetic data. In response, this study utilizes DAS data to examine the effects of using various subarray lengths by comparing pseudo-2-D VS cross-sections derived from active-source waveforms collected at a well-characterized field site. DAS is particularly useful for 2-D MASW applications because the subarray geometry does not need to be determined prior to field data acquisition. We organize the DAS waveforms into multiple sets of overlapping MASW subarrays of differing lengths, ranging from 11 to 47 m, along the same alignment, allowing for direct comparison of the derived pseudo-2-D VS results at the site. We show that the length of the individual MASW subarrays has a significant effect on the resulting VS cross-sections, including the resolved location of a strong impedance contrasts at our study site, and evaluate the results relative to ground truth from invasive testing. Our results suggest that the choice of subarray length is important and should be carefully chosen to meet project-specific goals. Furthermore, analysts may consider using multiple subarray geometries during the data processing stage, as is made possible by DAS, to properly evaluate the uncertainty of 2-D MASW results. This study demonstrates the potential of using DAS to collect data for 2-D MASW in a manner that is efficient and flexible, and can be easily scaled up for use with very long arrays.
- NSF-PAR ID:
- 10345829
- Date Published:
- Journal Name:
- Sensors
- Volume:
- 22
- Issue:
- 12
- ISSN:
- 1424-8220
- Page Range / eLocation ID:
- 4589
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
SUMMARY -
SUMMARY Distributed acoustic sensing (DAS) networks promise to revolutionize observational seismology by providing cost-effective, highly dense spatial sampling of the seismic wavefield, especially by utilizing pre-deployed telecomm fibre in urban settings for which dense seismic network deployments are difficult to construct. However, each DAS channel is sensitive only to one projection of the horizontal strain tensor and therefore gives an incomplete picture of the horizontal seismic wavefield, limiting our ability to make a holistic analysis of instrument response. This analysis has therefore been largely restricted to pointwise comparisons where a fortuitious coincidence of reference three-component seismometers and colocated DAS cable allows. We evaluate DAS instrument response by comparing DAS measurements from the PoroTomo experiment with strain-rate wavefield reconstructed from the nodal seismic array deployed in the same experiment, allowing us to treat the entire DAS array in a systematic fashion irrespective of cable geometry relative to the location of nodes. We found that, while the phase differences are in general small, the amplitude differences between predicted and observed DAS strain rates average a factor of 2 across the array and correlate with near-surface geology, suggesting that careful assessment of DAS deployments is essential for applications that require reliable assessments of amplitude. We further discuss strategies for empirical gain corrections and optimal placement of point sensor deployments to generate the best combined sensitivity with an already deployed DAS cable, from a wavefield reconstruction perspective.more » « less
-
more » « less
SUMMARY In the immediate vicinity of a source, there are strong gradients in the seismic wavefield that are tamed and modified in distributed acoustic sensing (DAS) recording due to combined effects of gauge-length averaging and local stacking on the local strain field. Close to a source broadside propagation effects are significant, and produce a characteristic impact on the local DAS channels. In the presence of topography, of surface or cable, additional effects are introduced that modify the expected signal. All these influences mean that the results of tap tests used to calibrate the channel positions along a DAS cable may give a distorted view of the actual geometry. Such effects can be important for detailed mapping of faulting processes and comparable features.
-
more » « less
SUMMARY In this study, I demonstrate that distributed acoustic sensing (DAS) raw strain rate data can directly be used to estimate spectral source parameters through an Empirical Green's Function (EGF) deconvolution analysis. Previously, DAS had been widely used in passive seismology to image the subsurface and analyze ground motion variations by converting strain or strain rate to particle velocity or acceleration prior to analysis. In this study, spectral analysis is applied to the PoroTomo joint DAS and seismic Nodal array in the Brady Hot Springs geothermal field to obtain source parameters for two M4 earthquakes via EGF analysis, where nearly collocated smaller events are used as an EGF to remove path and site effects. The EGF workflow is applied to raw DAS strain rate data without conversion to particle velocities and raw Nodal seismic data. The DAS and Nodal results are very consistent with similar features of spectral ratios, corner frequencies and moment ratios for the same event pairs. The uncertainty due to stacked spectral measurement is much lower on the DAS array, suggesting better stability of spectral shape measurement, possibly due to the much denser spatial sampling. The uncertainty due to model fitting is similar between DAS and Nodal arrays with slightly lower uncertainty on the DAS array. These observations demonstrate potential for directly using the strain rate measurements from DAS arrays for earthquake source characterizations.
-
more » « less
ABSTRACT Distributed acoustic sensing (DAS) technology is an emerging field of seismic sensing that enables recording ambient noise seismic data along the entire length of a fiber-optic cable at meter-scale resolution. Such a dense spatial resolution of recordings over long distances has not been possible using traditional methods because of limited hardware resources and logistical concerns in an urban environment. The low spatial resolution of traditional passive seismic acquisition techniques has limited the accuracy of the previously generated velocity profiles in many important urban regions, including the Reno-area basin, to the top 100 m of the underlying subsurface. Applying the method of seismic interferometry to ambient noise strain rate data obtained from a dark-fiber cable allows for generating noise cross correlations, which can be used to infer shallow and deep subsurface properties and basin geometry. We gathered DAS ambient noise seismic data for this study using a 12 km portion of a dark-fiber line in Reno, Nevada. We used gathered data to generate and invert dispersion curves to estimate the near-surface shear-wave velocity structure. Comparing the generated velocity profiles with previous regional studies shows good agreement in determining the average depth to bedrock and velocity variations in the analyzed domain. A synthetic experiment is also performed to verify the proposed framework further and better understand the effect of the infrastructural cover along the cable. The results obtained from this research provide insight into the application of DAS using dark-fiber lines in subsurface characterization in urban environments. It also discusses the potential effects of the conduit that covers such permanent fiber installations on the produced inversion results.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/s22124589
