Coded aperture X-ray computed tomography is a computational imaging technique capable of reconstructing inner structures of an object from a reduced set of X-ray projection measurements. Coded apertures are placed in front of the X-ray sources from different views and thus significantly reduce the radiation dose. This paper introduces coded aperture X-ray computed tomography for robotic X-ray systems which offer positioning flexibility. While single coded-aperture 3D tomography was recently introduced for standard trajectory CT scanning, it is shown that significant gains in imaging performance can be attained by simple modifications in the CT scanning trajectories enabled by emerging dual robotic CT systems. In particular, the subject is fixed on a plane and the CT system uniformly rotates around the r −axis which is misaligned with the coordinate axes. A single stationary coded aperture is placed on front of the robotic X-ray source above the plane and the corresponding X-ray projections are measured by a two-dimensional detector on the second arm of the robotic system. The compressive measurements with misalignment enable the reconstruction of high-resolution three-dimensional volumetric images from the low-resolution coded projections on the detector at a sub-sampling rate. An efficient algorithm is proposed to generate the rotation matrix with two basic sub-matrices and thus the forward model is formulated. The stationary coded aperture is designed based on the Pearson product-moment correlation coefficient analysis and the direct binary search algorithm is used to obtain the optimized coded aperture. Simulations using simulated datasets show significant gains in reconstruction performance compared to conventional coded aperture CT systems.
more »
« less
Learning to scan: A deep reinforcement learning approach for personalized scanning in CT imaging
. Computed Tomography (CT) takes X-ray measurements on the subjects to reconstruct tomographic images. As X-ray is radioactive, it is desirable to control the total amount of dose of X-ray for safety concerns. Therefore, we can only select a limited number of measurement angles and assign each of them limited amount of dose. Traditional methods such as compressed sensing usually randomly select the angles and equally distribute the allowed dose on them. In most CT reconstruction models, the emphasize is on designing effective image representations, while much less emphasize is on improving the scanning strategy. The simple scanning strategy of random angle selection and equal dose distribution performs well in general, but they may not be ideal for each individual subject. It is more desirable to design a personalized scanning strategy for each subject to obtain better reconstruction result. In this paper, we propose to use Reinforcement Learning (RL) to learn a personalized scanning policy to select the angles and the dose at each chosen angle for each individual subject. We first formulate the CT scanning process as an Markov Decision Process (MDP), and then use modern deep RL methods to solve it. The learned personalized scanning strategy not only leads to better reconstruction results, but also shows strong generalization to be combined with different reconstruction algorithms.
more » « less- Award ID(s):
- 1818592
- NSF-PAR ID:
- 10356034
- Date Published:
- Journal Name:
- Inverse Problems & Imaging
- Volume:
- 16
- Issue:
- 1
- ISSN:
- 1930-8337
- Page Range / eLocation ID:
- 179
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Static coded aperture x-ray tomography was introduced recently where a static illumination pattern is used to interrogate an object with a low radiation dose, from which an accurate 3D reconstruction of the object can be attained computationally. Rather than continuously switching the pattern of illumination with each view angle, as traditionally done, static code computed tomography (CT) places a single pattern for all views. The advantages are many, including the feasibility of practical implementation. This paper generalizes this powerful framework to develop single-scan dual-energy coded aperture spectral tomography that enables material characterization at a significantly reduced exposure level. Two sensing strategies are explored: rapid kV switching with a single-static block/unblock coded aperture, and coded apertures with non-uniform thickness. Both systems rely on coded illumination with a plurality of x-ray spectra created by kV switching or 3D coded apertures. The structured x-ray illumination is projected through the objects of interest and measured with standard x-ray energy integrating detectors. Then, based on the tensor representation of projection data, we develop an algorithm to estimate a full set of synthesized measurements that can be used with standard reconstruction algorithms to accurately recover the object in each energy channel. Simulation and experimental results demonstrate the effectiveness of the proposed cost-effective solution to attain material characterization in low-dose dual-energy CT.more » « less
-
more » « less
Compressive x-ray tomosynthesis (CXT) uses a set of encoded projection measurements from different incident angles to reconstruct the object under inspection. We consider the variable motion of objects on a conveyor mechanism and establish an imaging model based on the sensing geometry of a dynamic CXT system. Then, a numerical algorithm is proposed to optimize the structured illumination series to improve reconstruction accuracy with reduced radiation dose. Compared with the state-of-the-art method, the proposed strategy increases the degrees of optimization freedom by jointly optimizing the coding mask patterns, locations of x-ray sources, and exposure moments in the CXT system, thus obtaining better reconstruction performance. A genetic algorithm is applied to achieve the optimization results. It shows that the proposed method outperforms the traditional CXT approach by further improving reconstruction performance under comparable radiation dose.
-
Introduction: Computed tomography perfusion (CTP) imaging requires injection of an intravenous contrast agent and increased exposure to ionizing radiation. This process can be lengthy, costly, and potentially dangerous to patients, especially in emergency settings. We propose MAGIC, a multitask, generative adversarial network-based deep learning model to synthesize an entire CTP series from only a non-contrasted CT (NCCT) input. Materials and Methods: NCCT and CTP series were retrospectively retrieved from 493 patients at UF Health with IRB approval. The data were deidentified and all images were resized to 256x256 pixels. The collected perfusion data were analyzed using the RapidAI CT Perfusion analysis software (iSchemaView, Inc. CA) to generate each CTP map. For each subject, 10 CTP slices were selected. Each slice was paired with one NCCT slice at the same location and two NCCT slices at a predefined vertical offset, resulting in 4.3K CTP images and 12.9K NCCT images used for training. The incorporation of a spatial offset into the NCCT input allows MAGIC to more accurately synthesize cerebral perfusive structures, increasing the quality of the generated images. The studies included a variety of indications, including healthy tissue, mild infarction, and severe infarction. The proposed MAGIC model incorporates a novel multitask architecture, allowing for the simultaneous synthesis of four CTP modalities: mean transit time (MTT), cerebral blood flow (CBF), cerebral blood volume (CBV), and time to peak (TTP). We propose a novel Physicians-in-the-loop module in the model's architecture, acting as a tunable layer that allows physicians to manually adjust the amount of anatomic detail present in the synthesized CTP series. Additionally, we propose two novel loss terms: multi-modal connectivity loss and extrema loss. The multi-modal connectivity loss leverages the multi-task nature to assert that the mathematical relationship between MTT, CBF, and CBV is satisfied. The extrema loss aids in learning regions of elevated and decreased activity in each modality, allowing for MAGIC to accurately learn the characteristics of diagnostic regions of interest. Corresponding NCCT and CTP slices were paired along the vertical axis. The model was trained for 100 epochs on a NVIDIA TITAN X GPU. Results and Discussion: The MAGIC model’s performance was evaluated on a sample of 40 patients from the UF Health dataset. Across all CTP modalities, MAGIC was able to accurately produce images with high structural agreement between the entire synthesized and clinical perfusion images (SSIMmean=0.801 , UQImean=0.926). MAGIC was able to synthesize CTP images to accurately characterize cerebral circulatory structures and identify regions of infarct tissue, as shown in Figure 1. A blind binary evaluation was conducted to assess the presence of cerebral infarction in both the synthesized and clinical perfusion images, resulting in the synthesized images correctly predicting the presence of cerebral infarction with 87.5% accuracy. Conclusions: We proposed a MAGIC model whose novel deep learning structures and loss terms enable high-quality synthesis of CTP maps and characterization of circulatory structures solely from NCCT images, potentially eliminating the requirement for the injection of an intravenous contrast agent and elevated radiation exposure during perfusion imaging. This makes MAGIC a beneficial tool in a clinical scenario increasing the overall safety, accessibility, and efficiency of cerebral perfusion and facilitating better patient outcomes. Acknowledgements: This work was partially supported by the National Science Foundation, IIS-1908299 III: Small: Modeling Multi-Level Connectivity of Brain Dynamics + REU Supplement, to the University of Florida.more » « less
-
Abstract: Coded aperture X-ray computed tomography (CT) has the potential to revolutionize X-ray tomography systems in medical imaging and air and rail transit security - both areas of global importance. It allows either a reduced set of measurements in X-ray CT without degrada- tion in image reconstruction, or measure multiplexed X-rays to simplify the sensing geometry. Measurement reduction is of particular interest in medical imaging to reduce radiation, and airport security often imposes practical constraints leading to limited angle geometries. Coded aperture compressive X-ray CT places a coded aperture pattern in front of the X-ray source in order to obtain patterned projections onto a detector. Compressive sensing (CS) reconstruction algorithms are then used to recover the image. To date, the coded illumination patterns used in conventional CT systems have been random. This paper addresses the code optimization prob- lem for general tomography imaging based on the point spread function (PSF) of the system, which is used as a measure of the sensing matrix quality which connects to the restricted isom- etry property (RIP) and coherence of the sensing matrix. The methods presented are general, simple to use, and can be easily extended to other imaging systems. Simulations are presented where the peak signal to noise ratios (PSNR) of the reconstructed images using optimized coded apertures exhibit significant gain over those attained by random coded apertures. Additionally, results using real X-ray tomography projections are presented.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3934/ipi.2021045
