Airborne Doppler radar observations of the wind field in the tropical cyclone boundary layer (TCBL) during the landfall of Hurricane Ida (2021) are examined here. Asymmetries in tangential and radial flow are governed by tropical cyclone (TC) motion and vertical wind shear prior to landfall, while frictional effects dominate the asymmetry location during landfall. Strong TCBL inflow on the offshore‐flow side of Ida occurs during landfall, while the location of the peak tangential wind at the top of the TCBL during this period is located on the onshore‐flow side. A comparison of these observations with a numerical simulation of TC landfall shows many consistencies with the modeling study, though there are some notable differences that may be related to differences in the characteristics of the land surface between the simulation and the observations here.
The evolution of the tropical cyclone boundary layer (TCBL) wind field before landfall is examined in this study. As noted in previous studies, a typical TCBL wind structure over the ocean features a supergradient boundary layer jet to the left of motion and Earth-relative maximum winds to the right. However, the detailed response of the wind field to frictional convergence at the coastline is less well known. Here, idealized numerical simulations reveal an increase in the offshore radial and vertical velocities beginning once the TC is roughly 200 km offshore. This increase in the radial velocity is attributed to the sudden decrease in frictional stress once the highly agradient flow crosses the offshore coastline. Enhanced advection of angular momentum by the secondary circulation forces a strengthening of the supergradient jet near the top of the TCBL. Sensitivity experiments reveal that the coastal roughness discontinuity dominates the friction asymmetry due to motion. Additionally, increasing the inland roughness through increasing the aerodynamic roughness length enhances the observed asymmetries. Last, a brief analysis of in situ surface wind data collected during the landfall of three Gulf of Mexico hurricanes is provided and compared to the idealized simulations. Despite the limited in situ data, the observations generally support the simulations. The results here imply that assumptions about the TCBL wind field based on observations from over horizontally homogeneous surface types—which have been well documented by previous studies—are inappropriate for use near strong frictional heterogeneity.
more » « less- Award ID(s):
- 1663978
- NSF-PAR ID:
- 10365390
- Publisher / Repository:
- American Meteorological Society
- Date Published:
- Journal Name:
- Monthly Weather Review
- Volume:
- 150
- Issue:
- 3
- ISSN:
- 0027-0644
- Page Range / eLocation ID:
- p. 529-549
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
null (Ed.)Abstract The sensitivity of the inland wind decay to realistic inland surface roughness lengths and soil moisture contents is evaluated for strong, idealized tropical cyclones (TCs) of category 4 strength making landfall. Results show that the relative sensitivities to roughness and moisture differ throughout the decay process, and are dependent on the strength and size of the vortex. First, within 12 h of landfall, intense winds at the surface decay rapidly in reaction to the sudden change in surface roughness and decreasing enthalpy fluxes. Wind speeds above the boundary layer decay at a slower rate. Differences in soil moisture contents minimally affect intensity during the first 12 h, as the enhancement of latent heat fluxes from high moisture contents is countered by enhanced surface cooling. After TCs decay to tropical storm intensities, weakening slows and the sensitivity of the intensity decay to soil moisture increases. Increased latent heating becomes significant enough to combat surface temperature cooling, resulting in enhanced convection outside of the expanding radius of maximum winds. This supports a slower decay. Additionally, the decay of the radial wind profile by quadrant is highly asymmetric, as the rear and left-of-motion quadrants decay the fastest. Increasing surface roughness accelerates the decay of the strongest winds, while increasing soil moisture slows the decay of the larger TC wind field. Results have implications for inland forecasting of TC winds and understanding the potential for damage.more » « less
-
more » « less
Abstract An idealized, three‐dimensional, 1 km horizontal grid spacing numerical simulation of a rapidly intensifying tropical cyclone is used to extend basic knowledge on the role of mean and eddy momentum transfer on the dynamics of the intensification process. Examination of terms in the tangential and radial velocity tendency equations provides an improved quantitative understanding of the dynamics of the spin‐up process within the inner‐core boundary layer and eyewall regions of the system‐scale vortex. Unbalanced and non‐axisymmetric processes are prominent features of the rapid spin‐up process. In particular, the wind asymmetries, associated in part with the asymmetric deep convection, make a substantive contribution (
∼ 30%) to the maximum wind speed inside the radius of this maximum. The analysis provides a novel explanation for inflow jets sandwiching the upper‐tropospheric outflow layer which are frequently found in numerical model simulations. In addition, it provides an opportunity to assess the applicability of generalized Ekman balance during rapid vortex spin‐up. The maximum tangential wind occurs within and near the top of the frictional inflow layer and as much as 10 km inside the maximum gradient wind. Spin‐up in the friction layer is accompanied by supergradient winds that exceed the gradient wind by up to 20%. Overall, the results affirm prior work pointing to significant limitations of a purely axisymmetric balance description, for example, gradient balance/Ekman balance, when applied to a rapidly intensifying tropical cyclone. -
null (Ed.)Abstract The existence of supergradient wind in the interior of the boundary layer is a distinct feature of a tropical cyclone (TC). Although the vertical advection is shown to enhance supergradient wind in TC boundary layer (TCBL), how and to what extent the strength and structure of supergradient wind are modulated by vertical advection are not well understood. In this study, both a TCBL model and an axisymmetric full-physics model are used to quantify the contribution of vertical advection process to the strength and vertical structure of supergradient wind in TCBL. Results from the TCBL model show that the removal of vertical advection of radial wind reduces both the strength and height of supergradient wind by slightly more than 50%. The removal of vertical advection of agradient wind reduces the height of the supergradient wind core by ~30% but increases the strength of supergradient wind by ~10%. Results from the full-physics model show that the removal of vertical advection of radial wind or agradient wind reduces both the strength and height of supergradient wind but the removal of that of radial wind produces a more substantial reduction (52%) than the removal of that of agradient wind (35%). However, both the intensification rate and final intensity of the simulated TCs in terms of maximum 10-m wind speed show little differences in experiments with and without the vertical advection of radial or agradient wind, suggesting that supergradient wind contributes little to either the intensification rate or the steady-state intensity of the simulated TC.more » « less
-
more » « less
Currents in the ocean surface boundary layer (OSBL) determine the horizontal transport of submerged buoyant material, such as pollutants, plankton, and bubbles. Commonly, the mean horizontal transport, that is, the transport that changes the horizontal position of the material’s center of mass, is assumed to be accomplished by horizontal mean currents. However, surface convergence zones due to OSBL turbulence organize both wind-driven horizontal currents and near-surface concentrated buoyant material. In such surface convergence zones, concentrations of buoyant material are enhanced (e.g., apparent as windrows) and collocate with increased horizontal turbulent currents, here referred to as turbulent jets. In turn, the correlation of turbulent jet flow and material concentrations leads to a net mean horizontal transport due to turbulent motion. To examine this turbulent jet transport, an idealized model is devised for a wind-driven flow that is perturbed by prescribed cellular flow structures with crosswind surface convergence zones. Model solutions of the jet flow and material concentrations reveal that turbulent jet transport is comparable to the transport by horizontal mean currents for sufficiently strong cellular flow and material buoyancy. To test this model, we also perform more realistic turbulence-resolving large-eddy simulations (LESs) of wind and wave-driven OSBL turbulence. LES results are consistent with many features of the idealized model and suggest that the commonly overlooked turbulent jet transport is about 20%–50% of the traditional transport by horizontal mean currents. Thus, turbulent jet transport should be taken into account for accurate transport models of buoyant material in the OSBL.
