An official website of the United States government
Parameter calibration aims to estimate unobservable parameters used in a computer model by using physical process responses and computer model outputs. In the literature, existing studies calibrate all parameters simultaneously using an entire data set. However, in certain applications, some parameters are associated with only a subset of data. For example, in the building energy simulation, cooling (heating) season parameters should be calibrated using data collected during the cooling (heating) season only. This study provides a new multiblock calibration approach that considers such heterogeneity. Unlike existing studies that build emulators for the computer model response, such as the widely used Bayesian calibration approach, we consider multiple loss functions to be minimized, each for a block of parameters that use the corresponding data set, and estimate the parameters using a nonlinear optimization technique. We present the convergence properties under certain conditions and quantify the parameter estimation uncertainties. The superiority of our approach is demonstrated through numerical studies and a real-world building energy simulation case study. History: Bianca Maria Colosimo served as the senior editor for this article. Funding: This work was partially supported by the National Science Foundation [Grants CMMI-1662553, CMMI-2226348, and CBET-1804321]. Data Ethics & Reproducibility Note: The code capsule is available on Code Ocean at https://codeocean.com/capsule/8623151/tree/v1 and in the e-Companion to this article (available at https://doi.org/10.1287/ijds.2023.0029 ).
more »
« less
Season-dependent Parameter Calibration in Building Energy Simulation
As the energy consumption from residential and commercial buildings makes up approximately three-quarters of the U.S. electricity loads, analyzing building energy consumption behavior becomes essential for effective power grid operation. An accurate physics-based building energy simulator that is built on first principles can predict an individual building’s energy response, such as energy consumption and indoor environmental conditions under different weather and operational control scenarios. In the building energy simulator, several parameters that specify building characteristics need to be set a priori. Among those parameters, some parameters are season-dependent, whereas other parameters should be globally employed throughout a year. Existing studies in parameter calibration ignore such heterogeneity, which causes suboptimal calibration results. This study presents a new calibration approach that considers the seasonal dependency.
more »
« less
- Award ID(s):
- 2013161
- PAR ID:
- 10388606
- Date Published:
- Journal Name:
- Proceedings of the 2021 IISE Annual Conference
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Energy-efficiency is a key concern in mobile sensing applications, such as those for tracking social interactions or physical activities. An attractive approach to saving energy is to shape the workload of the system by artificially introducing delays so that the workload would require less energy to process. However, adding delays to save energy may have a detrimental impact on user experience. To address this problem, we present Gratis, a novel paradigm for incorporating workload shaping energy optimizations in mobile sensing applications in an automated manner. Gratis adopts stream programs as a high-level abstraction whose execution is coordinated using an explicit power management policy. We present an expressive coordination language that can specify a broad range of workload-shaping optimizations. A unique property of the proposed power management policies is that they have predictable performance, which can be estimated at compile time, in a computationally efficient manner, from a small number of measurements. We have developed a simulator that can predict the energy with a average error of 7% and delay with a average error of 15%, even when applications have variable workloads. The simulator is scalable: hours of real-world traces can be simulated in a few seconds. Building on the simulator's accuracy and scalability, we have developed tools for configuring power management policies automatically. We have evaluated Gratis by developing two mobile applications and optimizing their energy consumption. For example, an application that tracks social interactions using speaker-identification techniques can run for only 7 hours without energy optimizations. However, when Gratis employs batching, scheduled concurrency, and adaptive sensing, the battery lifetime can be extended to 45 hours when the end-to-end deadline is one minute. These results demonstrate the efficacy of our approach to reduce energy consumption in mobile sensing applications.more » « less
-
null (Ed.)In the United States, approximately 40% of the primary energy use and 72% of the electricity use belong to the building sector. This shows the significance of studying the potential for reducing the building energy consumption and buildings’ sustainability for ensuring a sustainable development. Therefore, many different efforts focus on reducing the energy consumption of residential buildings. Data-validated building energy modeling methods are among the studies for such an effort, particularly, by enabling the identification of the potential savings associated with different potential retrofit strategies. However, there are many uncertainties that can impact the accuracy of such energy model results, one of which is the weather input data. In this study, to investigate the impact of spatial temperature variation on building energy consumption, six weather stations in an urban area with various urban density were selected. A validated energy model was developed using energy audit data and high-frequency electricity consumption of a residential building in Austin, TX. The energy consumption of the modeled building was compared using the selected six weather datasets. The results show that energy use of a building in an urban area can be impacted by up to 12% due to differences in urban density. This indicates the importance of weather data in predicting energy consumption of the building. The methodology and results of this study can be used by planners and decision makers to reduce uncertainties in estimating the building energy use in urban scale.more » « less
-
Chronis, A. (Ed.)Traditional building energy simulation tools often assess performance as a function of the unique climate, physical characteristics, and operational parameters that define specific buildings and communities, planned or existing. This paper presents the results of a sensitivity analysis on the input parameters(relating to both the building and climate) that affect the annual energy consumption loads of an existing residential neighborhood in the U.S. Midwest over the anticipated service life of its buildings using the Urban Modeling Interface (umi). Accordingly, first, the effect of multiple building construction characteristic packages and inclusion of outdoor vegetation, are investigated under typical meteorological climate conditions. Afterwards, since typical climate conditions may not adequately describe the potential extreme conditions that will be encountered over the entire service life of these buildings, alternative weather datasets were also utilized in the sensitivity analysis. The study’s findings suggest that cooling loads are expected to increase dramatically over the next five decades, both due to changes in the climate and the more wide-spread use of air-conditioning units. Since the results showed that trees can effectively reduce cooling loads by up to 7%, it is recommended that urban vegetation should be considered as an effective adaptation measure for facing the growing cooling demands.more » « less
-
Distributed market structures for local, transactive energy trading can be modeled with ecological systems, such as mycorrhizal networks, which have evolved to facilitate interplant carbon exchange in forest ecosystems. However, the complexity of these ecological systems can make it challenging to understand the effect that adopting these models could have on distributed energy systems and the magnitude of associated performance parameters. We therefore simplified and implemented a previously developed blueprint for mycorrhizal energy market models to isolate the effect of the mycorrhizal intervention in allowing buildings to redistribute portions of energy assets on competing local, decentralized marketplaces. Results indicate that the applied mycorrhizal intervention only minimally affects market and building performance indicators—increasing market self-consumption, decreasing market self-sufficiency, and decreasing building weekly savings across all seasonal (winter, fall, summer) and typological (residential, mixed-use) cases when compared to a fixed, retail feed-in-tariff market structure. The work concludes with a discussion of opportunities for further expansion of the proposed mycorrhizal market framework through reinforcement learning as well as limitations and policy recommendations considering emerging aggregated distributed energy resource (DER) access to wholesale energy markets.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
