An official website of the United States government
Abstract Weathering processes weaken and break apart rock, freeing nutrients and enhancing permeability through the subsurface. To better understand these processes, it is useful to constrain physical properties of materials derived from weathering within the critical zone. Foliated rocks exhibit permeability, strength and seismic anisotropy–the former two bear hydrological and geomorphological consequences while the latter is geophysically quantifiable. Each of these types of anisotropy are related to rock fabric (fractures and foliation); thus, characterizing weathering‐dependent changes in rock fabric with depth may have a range of implications (e.g., landslide susceptibility, groundwater modeling, and landscape evolution). To better understand how weathering effects rock fabric, we quantify seismic anisotropy in saprolite and weathered bedrock within two catchments underlain by the Precambrian Loch Raven schist, located in Oregon Ridge Park, MD. Using circular geophone arrays and perpendicular seismic refraction profiles, anisotropy versus depth functions are created for material 0–25 m below ground surface (bgs). We find that anisotropy is relatively low (0%–15%) in the deepest material sampled (12–25 m bgs) but becomes more pronounced (29%–33%) at depths corresponding with saprolite and highly weathered bedrock (5–12 m bgs). At shallow soil depths (0–5 m bgs), material is seismically isotropic, indicating that mixing processes have destroyed parent fabric. Therefore, in situ weathering and anisotropy appear to be correlated, suggesting that in‐place weathering amplifies the intrinsic anisotropy of bedrock.
more »
« less
Confronting Solid‐State Shear Bias: Magmatic Fabric Contribution to Crustal Seismic Anisotropy
Abstract Seismic anisotropy is controlled by aligned rock‐forming minerals, which most studies attribute to solid‐state shear with less consideration for magmatic fabric in plutonic rocks (rigid‐body rotation of crystals in the presence of melt). Our study counters this traditional solid‐state bias by evaluating contributions from fossil magmatic fabric. We collected samples from various tectonic settings, identified mineral orientations with electron backscatter diffraction and neutron diffraction, and calculated their bulk rock elastic properties. Results indicate that magmatic fabric may lead to moderate to strong anisotropy (3%–9%), comparable to solid‐state deformation. Also, magmatically aligned feldspar may cause foliation‐perpendicular fast velocity, a unique orientation that contrasts with a fast foliation typical of solid‐state deformation. Therefore, magmatic fabric may be more relevant to seismic anisotropy than previously recognized. Accordingly, increased considerations of magmatic fabric in arcs, batholiths, and other tectonic settings can change and potentially improve the prediction, observation, and interpretation of crustal seismic anisotropy.
more »
« less
- PAR ID:
- 10401836
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 50
- Issue:
- 6
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)The Canadian Superior Province has become one of the key test pieces to discuss tectonic processes and mechanisms of crustal growth in the Late Archean. The Province consists of a >2.8 Ga proto-cratonic core intruded by voluminous arc-like plutons and surrounded by a series of narrow, elongate ca. 2.8–2.7 Ga juvenile belts, also referred to as terranes or domains. The terranes seem to wrap around the proto-cratonic core and generally young outward, but the kinematics and geodynamic causes of their assembly remain debated. In this paper, we examine the Radisson pluton in northeastern Qu´ebec, which intruded the southern, outer edge of the presumed magmatic arc (Bienville domain) along its ~WNW–ESE-trending tectonic boundary with the protocratonic crust (La Grande domain). The pluton, dominated by porphyritic monzogranite to quartz monzonite, was emplaced at around 2712 Ma and exhibits complex internal structure resulting from superposed magmatic to solid-state deformations. An early margin-parallel ~WNW–ESE magmatic foliation containing a steep lineation, recognized by the anisotropy of magnetic susceptibility (AMS), is interpreted as recording vertical stretching and horizontal flattening of highly crystallized magma, either due to emplacement and/or pure shear dominated transpression. More widespread, however, is a horizontal lineation within the same foliation that is interpreted as recording post-emplacement, but still syn-magmatic, tectonic strain (~NNE–SSW shortening and boundaryparallel stretching). Upon cooling, localized dextral S–C mylonite zones accommodated further shortening within the pluton whereas undeformed late-stage felsic dikes cross-cut the solid-state fabric at an angle to the pluton margins. We suggest that this structural succession, also reproduced by numerical fabric modeling, is a local-scale signal of a two-stage assembly of the northeastern Superior Province: the frontal, NNE-directed terrane convergence and attachment to the cratonic nucleus, operating in a ‘hot’ regime with voluminous arclike plutonism, was followed by more localized dextral shearing parallel to terrane boundaries. The latter phase is recorded at the proto-craton margin but also in the outboard Abitibi greenstone belt virtually at the same time (ca. 2700–2690 Ma). In combination, the two-stage evolution and similar deformation distributed over a broad region resemble modern large hot orogens formed in a plate-tectonic regime.more » « less
-
Abstract Seismic anisotropy beneath eastern North America likely reflects both the remnant lithospheric fabrics and the present‐day deformation of the asthenosphere. We report new observations of splitting in core‐refracted shear phases observed over 3–5 years at 33 sites in New Jersey, New York, and states in the New England region and also include data from eight previously studied locations. Our data set emphasizes back azimuthal coverage necessary to capture the directional variation of splitting parameters expected from vertically varying anisotropy. We report single‐phase splitting parameters as well as station‐averaged values based on splitting intensity technique that incorporates all observed records regardless of whether they showed evidence of splitting or not. Trends of averaged fast shear wave polarizations appear coherent and are approximately aligned with absolute plate motion direction. The general disparity between the fast axes and the trend of surface tectonic features suggests a dominant asthenosphere contribution for the observed seismic anisotropy. Averaged delay values systematically increase from ~0.5 s in New Jersey to ~1.4 s in Maine. Splitting parameters vary at all sites, and neighboring stations often show similar patterns of directional variation. We developed criteria to group stations based on their splitting patterns and identified four domains with distinct anisotropic properties. Splitting patterns of three domains suggest a layered anisotropic structure that is geographically variable, outlining distinct regions in the continental mantle, for example, the Proterozoic lithosphere of the Adirondack Mountains. A domain coincident with the North Appalachian Anomaly displays virtually no splitting, implying that the lithospheric fabric was locally erased.more » « less
-
Subduction zones are often characterized by the presence of strong trench-parallel seismic anisotropy and large delay times. Hydrous minerals, owing to their large elastic anisotropy and strong lattice preferred orientations (LPOs), are often invoked to explain these observations. However, the elasticity and the LPO of chloritoid, which is one of such hydrous phases relevant in subduction zone settings, are poorly understood. In this study, we measured the LPO of polycrystalline chloritoid in natural rock samples, obtained the LPO-induced seismic anisotropy, and evaluated the thermodynamic stability field of chloritoid in subduction zones. The LPO of chloritoid aggregates displayed a strong alignment of the [001] axes subnormal to the rock foliation, with a girdle distribution of the [100] axes and the (010) poles subparallel to the foliation. New elasticity data of single-crystal chloritoid showed a strong elastic anisotropy of chloritoid with 47% for S-waves (V S ) and 22% for P-waves (V P ), respectively. The combination of the LPO and the elastic anisotropy of the chloritoid aggregates produced a strong S-wave anisotropy with a maximum AV S of 18% and a P-wave anisotropy with an AV P of 10%. The role of chloritoid LPO in seismic anisotropy was evaluated in natural rock samples and a hypothetical blueschist. Our results indicate that the strong LPO of chloritoid along the subduction interface and in subducting slabs can influence the trench-parallel seismic anisotropy in subduction zones with “cold” geotherms.more » « less
-
Abstract Seismic anisotropy constitutes a useful tool for imaging the structure along the plate interface in subduction zones, but the seismic properties of mafic blueschists, a common rock type in subduction zones, remain poorly constrained. We applied the technique of electron backscatter diffraction (EBSD) based petrofabric analysis to calculate the seismic anisotropies of 14 naturally deformed mafic blueschists at dry, ambient conditions. The ductilely deformed blueschists were collected from terranes with inferred peak P‐T conditions applicable to subducting slabs at or near the plate interface in active subduction zones. Epidote blueschists display the greatestPwave anisotropy range (AVp ∼7%–20%), while lawsonite blueschist AVp ranges from ∼2% to 10%.Swave anisotropies generate shear wave splitting delay times up to ∼0.1 s over a thickness of 5 km. AVp magnitude increases with glaucophane abundance (from areal EBSD measurements), decreases with increasing epidote or lawsonite abundance, and is enhanced by glaucophane crystallographic preferred orientation (CPO) strength. Two‐phase rock recipe models provide further evidence of the primary role of glaucophane, epidote, and lawsonite in generating blueschist seismic anisotropy. The symmetry ofPwave velocity patterns reflects the deformation‐induced CPO type in glaucophane—an effect previously observed for hornblende on amphibolitePwave anisotropy. The distinctive seismic properties that distinguish blueschist from other subduction zone rock types and the strong correlation between anisotropy magnitude/symmetry and glaucophane CPO suggest that seismic anisotropy may be a useful tool in mapping the extent and deformation of blueschists along the interface, and the blueschist‐eclogite transition in active subduction zones.more » « less
