skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Recent Progress of Electrically Pumped AlGaN Diode Lasers in the UV-B and -C Bands
The development of electrically pumped semiconductor diode lasers emitting at the ultraviolet (UV)-B and -C spectral bands has been an active area of research over the past several years, motivated by a wide range of emerging applications. III-Nitride materials and their alloys, in particular AlGaN, are the material of choice for the development of this ultrashort-wavelength laser technology. Despite significant progress in AlGaN-based light-emitting diodes (LEDs), the technological advancement and innovation in diode lasers at these spectral bands is lagging due to several technical challenges. Here, the authors review the progress of AlGaN electrically-pumped lasers with respect to very recent achievements made by the scientific community. The devices based on both thin films and nanowires demonstrated to date will be discussed in this review. The state-of-the-art growth technologies, such as molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD); and various foreign substrates/templates used for the laser demonstrations will be highlighted. We will also outline technical challenges associated with the laser development, which must be overcome in order to achieve a critical technological breakthrough and fully realize the potential of these lasers.  more » « less
Award ID(s):
2020015
PAR ID:
10404149
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Photonics
Volume:
8
Issue:
7
ISSN:
2304-6732
Page Range / eLocation ID:
267
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Advanced Functional Materials)
    Abstract Metal halide perovskites have drawn tremendous attention in optoelectronic applications owing to the rapid development in photovoltaic and light‐emitting diode devices. More recently, these materials are demonstrated as excellent gain media for laser applications due to their large absorption coefficient, low defect density, high charge carrier mobility, long carrier diffusion length, high photoluminescence quantum yield, and low Auger recombination rate. Despite the great progress in laser applications, the development of perovskite lasers is still in its infancy and the realization of electrically pumped lasers has not yet been demonstrated. To accelerate the development of perovskite‐based lasers, it is important to understand the fundamental photophysical characteristics of perovskite gain materials. Here, the structure and gain behavior in various perovskite materials are discussed. Then, the effects of charge carrier dynamics and electron–phonon interaction on population inversion in different types of perovskite materials are analyzed. Further, recent advances in perovskite‐based lasers are also highlighted. Finally, a perspective on perovskite material design is presented and the remaining challenges of perovskite lasers are discussed. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Advanced Photonics Research)
    Metal halide perovskites represent a promising class of gain media for next‐generation nonepitaxial laser diodes. However, fully electrically pumped perovskite laser diodes have not been achieved yet. Herein, the use of sodium fluoride (NaF) is explored as an efficient additive in halide perovskite films to improve their optical and light amplification properties. The incorporation of NaF in perovskites leads to a remarkable threefold increase in light‐emitting intensity. The threshold of amplified spontaneous emission (ASE) by optical pumping is reduced by more than 20%, from ≈13.5 to 10.4 μJ cm−2. Furthermore, the NaF‐modified perovskites exhibit stable ASE emission, even after exposure to 1.5 billion optical pulses, highlighting substantial improvements in the material's photostability. Finally, optically pumped ASE is observed from a full perovskite light‐emitting diode stack, including lossy metal electrodes. This work demonstrates significant progress toward the development of electrically pumped perovskite lasers. 
    more » « less
  3. ; (, Spectroscopy Journal)
    Spontaneous Raman gas spectroscopy, which stands out as a versatile chemical identification tool, typically relies on frequency-doubled infrared laser sources to deliver the high power and narrow linewidth needed to achieve chemical detection at trace concentrations. The relatively low efficiency and high complexity of these lasers, however, can make them challenging to integrate into field-deployable instruments. Additionally, the frequency doubling prevents the utilization of circulating laser power for Raman enhancement. A diode-pumped Pr:YLF laser was investigated as an alternative narrow-band light source that could potentially realize a more portable Raman scattering system. When operated with an intracavity etalon, the laser realized a linewidth of 0.5 cm−1 with a green output power of 0.37 W and circulating power of 16 W when pumped with 3.1 W from a blue diode laser. Trace detection at atmospheric pressure with a high degree of spectral discrimination was demonstrated by resolving overlapping N2/CO and CO2/N2O Raman bands in air. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Electrically pumped lasing from hybrid organic–inorganic metal‐halide perovskite semiconductors could lead to nonepitaxial diode lasers that are tunable throughout the visible and near‐infrared spectrum; however, a viable laser diode architecture has not been demonstrated to date. Here, an important step toward this goal is achieved by demonstrating two distinct distributed feedback light‐emitting diode architectures that achieve low threshold, optically pumped lasing. Bottom‐ and top‐emitting perovskite light‐emitting diodes are fabricated on glass and Si substrates, respectively, using a polydimethylsiloxane stamp in the latter case to nanoimprint a second‐order distributed feedback grating directly into the methylammonium lead iodide active layer. The devices exhibit room temperature thresholds as low as ≈6 µJ cm−2, a peak external quantum efficiency of ≈0.1%, and a maximum current density of ≈2 A cm−2that is presently limited by degradation associated with excessive leakage current. In this low current regime, electrical injection does not adversely affect the optical pump threshold, leading to a projected threshold current density of ≈2 kA cm−2. Operation at low temperature can significantly decrease this threshold, but must overcome extrinsic carrier freeze‐out in the doped organic transport layers to maintain a reasonable drive voltage. 
    more » « less
  5. (, Journal of Nepal Physical Society)
    Sahu, Indra D (Ed.)
    Energy bandgap of AlxGa1−xN alloys can be tuned systematically from ∼ 3.4 to 6.1 eV by changing the alloy composition (x) from 0 to 1 and the direct bandgap nature is maintained in the entire range of alloy compositions which make the AlGaN alloys suitable materials for the development of light emitting diodes (LEDs) covering the ultraviolet (UV) spectral region from 210 to 400 nm. For LEDs in the deep UV regions (λ < 300 nm), Al-rich AlGaN alloys of Al content higher than 50% are required. Deep UV LEDs have applications in a wide range of fields including display, disinfection, medical, sensing, and communication. With recent progress in the material growth and electrical conductivity, Al-rich AlGaN alloys have emerged as unique wideband gap materials for the development of deep UV LEDs. In this review article, how the progress of Al-rich AlGaN alloys has made in terms of the material growth and electrical conductivity leading its emergence as deep UV materials have been reviewed. Challenges and prospects of the deep UV LEDs to improve the performance of the devices will also be discussed. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email