An official website of the United States government
Supercritical fluids (SCFs) are being investigated as a dielectric medium for their low viscosity, high dielectric strength, high heat transfer capability, low cost, and environmental friendliness. This paper introduces a straightforward, cost-effective, and commercially available sensor to measure SCF viscosity for the characterization of the dielectric medium. Quadratic and cubic fitting between the sensor current output and viscosity of He, H2, CO2, SF6, and N2 were made in the ambient lab environment. Experimental temperatures range from 19.3°C to 22.0°C and fluid pressure from 0.1 MPa-1.5 MPa. This manuscript introduces preliminary data for a methodology to correlate SCF viscosity to the output signal of a commercially available sensor. This will enable viscosity measurement of mixtures of dielectric fluids.
more »
« less
Theoretical Modeling and Experimental Testing on the Electrical Breakdown in Supercritical Fluids
Supercritical fluids (SCFs) have been recently considered to be used as insulating media due to properties that show exceptional dielectric strength, high heat transfer capability, and low viscosity. This paper reports the result of breakdown experiments on carbon dioxide (CO2) from gaseous to supercritical state. Experiments are performed under the isothermal condition of 310 K (37°C). The dielectric strength test is conducted in a 0.1 mm gap under uniform dc electric field. To interpret the result, a theoretical model that combines the thermodynamic calculation and existing data from the structure analysis by small angle x-ray scattering is developed. Our experiments suggest that the dielectric behavior of supercritical CO2 shows a discontinuity of the dielectric strength near the critical point. This phenomenon can be well explained by the theoretical model, which calculates the molecular cluster size and considers the local fluid structure.
more »
« less
- Award ID(s):
- 1944014
- PAR ID:
- 10406591
- Date Published:
- Journal Name:
- IEEE Conference on Electrical Insulation and Dielectric Phenomena
- Page Range / eLocation ID:
- 179 to 182
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Developing an environmentally benign styrene foam is a critical environmental need. Supercritical CO2 use in foams has proven to be a valuable path. Adding fillers to increase bubble nucleation has been pursued concurrently. A prominent filler used is high surface area fillers, such as smectic clays. However, all studies to date show a limit of 152% in compressive moduli and 260% in the compressive stress. The values, even with such gains, limit structural application. A seminal work in 1987 by Suh and Cotton proved that carbonyl linkages in calcium carbonates and CO2 interact and impact nucleation efficiency and performance in supercritical CO2 foams. In this paper, a high surface area clay (layer double hydroxides) which begins in an exfoliated state, then functionalized with a long chain alkyl carboxylate (stearic acid) is synthesized. The result is a remarkable multi-fold improvement to the compressive properties in comparison to polystyrene (PS); a 268% and 512% increase in compressive modulus and strength, respectively. Using a pre-delaminated approach, the higher surface area was achieved in the clays. The presence of the stearate improved the interactions between the clay galleries and PS through hydrophobic-hydrophobic interactions. The glass transition temperature of the nanocomposites was observed to shift to higher values after foaming. The results point to a new path to increase performance using a pre-delaminated clay with functional groups for environmentally benign foamsmore » « less
-
We found that supercritical CO2 and the availability of protein-rich matter in depleted oil reservoirs can result in the biogenic production of H2 from oil hydrocarbons by indigenous microbial communities. Our experimental results support the hypothesis that a decrease in pH to acidic levels due to the dissolution of supercritical CO2 into the formation water and availability of protein-rich matter favors the activity of H2-producing microbial communities over the activity of H2-using microbial communities. To determine where, when, and how much H2 could be produced in a depleted oil reservoir injected with CO2 and produced water (PW) supplied with protein-rich matter, we simulated the biogenic production of H2 for the Morrow B sandstone reservoir. Simulations were conducted using CO2Bio, a program developed to simulate the multiphase bio-geochemical reactive transport of CO2-CH4-H2-H2S gases in geological carbon storage (GCS) sites. The microbiological capabilities of CO2Bio are validated against batch reaction experimental results. Our field-scale simulation results indicate that 154 – 1673 kg of H2 could be produced after 100 days of CO2 and PW co-injection into a single well of radial flow, and that sandstone reservoirs are more suitable than carbonate reservoirs to produce H2 from dissolved hydrocarbons. Based on the obtained experimental and simulation results, we propose a new H2 production method that couples GCS and PW disposal in depleted oil reservoirs to attenuate environmental and energy issues related to global warming derived from atmospheric pollution with CO2, risk of freshwater resources contamination with PW, and depletion of energy resources.more » « less
-
SUMMARY Following reanalysis of data from eight seismic networks that operated in the region surrounding the Pampean flat slab during the past several decades, we generated 3-D images of Vp, Vs and $$V_{\rm p}/V_{\rm s}$$ from a combination of arrival times of P and S waves from local earthquakes, and Rayleigh wave dispersion curves from both ambient noise and existing shear wave models. Among the robust features in these images is a low velocity, root-like structure that extends beneath the high Andes to a deflection in the flat slab, which suggests the presence of an overthickened Andean crust rather than a hypothesized continental lithospheric root. Most of the larger scale features observed in both the subducted Nazca plate and the overriding continental lithosphere are related to the intense seismic activity in and around the Juan Fernandez Ridge Seismic Zone (JFRSZ). $$V_{\rm p}/V_{\rm s}$$ ratios beneath, within and above the JFRSZ are generally lower (~1.65–1.68) than those in the surrounding Nazca and continental lithosphere (~1.74–1.80). While the higher continental lithosphere ratios are due to reduced Vs and likely a result of hydration, the lower JFRSZ related ratios are due to reduced Vp and can be explained by increased silica and CO2 originating from beneath the slab, perhaps in concert with supercritical fluid located within the fracture and fault networks associated with the JFR. These and related features such as a region of high Vp and Vs observed at the leading edge of the JFRSZ are consistent with a basal displacement model previously proposed for the Laramide flat-slab event, in which the eroded base of the continental lithosphere accumulates as a keel at the front end of the flat slab while compressional horizontal stresses cause it to buckle. An initial concave up bend in the slab facilitates the infiltration of silica and CO2-rich melts from beneath the slab in a manner analogous to petit spot volcanism, while a second, concave down bend, releases CO2 and supercritical fluid into the overlying continental lithosphere.more » « less
-
Abstract Hydraulic fracturing of oil and gas wells is a water intensive process. Limited availability, cost and increasing government regulations restraining the use and disposal of fresh water have led to the need for alternative fracturing fluids. Using CO2 foam as a fracturing fluid can drastically reduce the need for water in hydraulic fracturing. We address the addition of polyelectrolyte complex nanoparticles (PECNP) to surfactant solutions to improve foam stability, durability and rheological properties at high foam qualities. Polyelectrolyte pH and polyanion/polycation ratios were varied to minimize particle size and maximize absolute zeta potential of the resulting nanoparticles. Rheological tests were conducted on foam systems of varying surfactant/PECNP ratios and different foam quality to understand the effect of shear on viscosity under simulated reservoir conditions of 40°C and 1300 psi. The same foam systems were tested for stability and durability in a view cell at reservoir conditions. Supercritical CO2 foam generated by surfactant alone resulted in short lived, low viscosity foam because of surfactant drainage from foam lamellae. However, addition of PECNP strengthens the foam film by swelling the film due to increased osmotic pressure and electrostatic forces. Electrostatic interactions reduce dynamic movement of surfactant micelles, thereby stabilizing the foam lamellae, which imparts high durability and viscosity to supercritical CO2 foams. From the rheology test results, it was concluded that increasing foam quality and the presence of PECNP resulted in improved viscosity. Also, foam systems with PECNP showed promising results compared with foam generated using surfactant alone in the view cell durability test. The addition of optimized polyelectrolyte nanoparticles to the surfactant can improve viscosity and durability of supercritical CO2 foam during hydraulic fracturing, which can lead to large reductions in water requirements.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/CEIDP50766.2021.9705453
