An official website of the United States government
Single nanopores in silicon nitride membranes are asymmetrically modified with Nafion and investigated with scanning ion conductance microscopy, where Nafion alters local ion concentrations at the nanopore. Effects of applied transmembrane potentials on local ion concentrations are examined, with the Nafion film providing a reservoir of cations in close proximity to the nanopore. Fluidic diodes based on ion concentration polarization are observed in the current-voltage response of the nanopore and in approach curves of SICM nanopipette in the vicinity of the nanopore. Experimental results are supported with finite element method simulations that detail ion depletion and enrichment of the nanopore/Nafion/nanopipette environment.
more »
« less
Modeling pyramidal silicon nanopores with effective ion transport
Abstract While the electrical models of the membrane-based solid-state nanopores have been well established, silicon-based pyramidal nanopores cannot apply these models due to two distinctive features. One is its 35.3° half cone angle, which brings additional resistance to the moving ions inside the nanopore. The other is its rectangular entrance, which makes calculating the access conductance challenging. Here, we proposed and validated an effective transport model (ETM) for silicon-based pyramidal nanopores by introducing effective conductivity. The impact of half cone angle can be described equivalently using a reduced diffusion coefficient (effective diffusion coefficient). Because the decrease of diffusion coefficient results in a smaller conductivity, effective conductivity is used for the calculation of bulk conductance in ETM. In the classical model, intrinsic conductivity is used. We used the top-down fabrication method for generating the pyramidal silicon nanopores to test the proposed model. Compared with the large error (≥25% in most cases) when using the classical model, the error of ETM in predicting conductance is less than 15%. We also found that the ETM is applicable when the ratio of excess ion concentration and bulk ion concentration is smaller than 0.2. At last, it is proved that ETM can estimate the tip size of pyramidal silicon nanopore. We believe the ETM would provide an improved method for evaluating the pyramidal silicon nanopores.
more »
« less
- PAR ID:
- 10411164
- Date Published:
- Journal Name:
- Nanotechnology
- Volume:
- 33
- Issue:
- 48
- ISSN:
- 0957-4484
- Page Range / eLocation ID:
- 485503
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Reproducing the exquisite ion selectivity displayed by biological ion channels in artificial nanopore systems has proven to be one of the most challenging tasks undertaken by the nanopore community, yet a successful achievement of this goal offers immense technological potential. Here, we show a strategy to design solid-state nanopores that selectively transport potassium ions and show negligible conductance for sodium ions. The nanopores contain walls decorated with 4′-aminobenzo-18-crown-6 ether and single-stranded DNA (ssDNA) molecules located at one pore entrance. The ionic selectivity stems from facilitated transport of potassium ions in the pore region containing crown ether, while the highly charged ssDNA plays the role of a cation filter. Achieving potassium selectivity in solid-state nanopores opens new avenues toward advanced separation processes, more efficient biosensing technologies, and novel biomimetic nanopore systems.more » « less
-
Conformal coating of nanopores with functional polymer nanolayers is the key to many emerging technologies such as miniature sensors and membranes for advanced molecular separations. While the polymer coatings are often used to introduce functional moieties, their controlled growth under nanoconfinement could serve as a new approach to manipulate the size and shape of coated nanopores, hence, enabling novel functions like molecular separation. However, precise control of coating thickness in the longitudinal direction of a nanopore is limited by the lack of a characterization method to profile coating thickness within the nanoconfined space. Here, we report an experimental approach that combines ion milling (IM) and high-resolution field emission scanning electron microscopy (FESEM) for acquiring an accurate depth profile of ultrathin (∼20 nm or less) coatings synthesized inside nanopores via initiated chemical vapor deposition (iCVD). The enhanced capability of this approach stems from the excellent x–y resolution achieved by FESEM (i.e., 4.9 nm/pixel), robust depth ( z) control enabled by IM (step size as small as 100 nm with R2 = 0.992), and the statistical power afforded by high-throughput sampling (i.e., ∼2000 individual pores). With that capability, we were able to determine with unparalleled accuracy and precision the depth profile of coating thickness and iCVD kinetics along 110-nm-diameter nanopores. That allowed us to uncover an unexpected coating depth profile featuring a maximum rate of polymerization at ∼250 nm underneath the top surface, i.e., down the pores, which we termed “necking.” The necking phenomenon deviates considerably from the conventionally assumed monotonous decrease in thickness along the longitudinal direction into a nanopore, as predicted by the diffusion-limited kinetics model of free radical polymerization. An initiator-centric collision model was then developed, which suggests that under the experimental conditions, the confinement imposed by the nanopores may lead to local amplification of the effective free radical concentration at z ≤ 100 nm and attenuation at z ≥ 500 nm, thus contributing to the observed necking phenomenon. The ion-milling-enabled depth profiling of ultrathin coatings inside nanopores, along with the initiator-mediated coating thickness control in the z-direction, may serve to enhance the performance of size-exclusion filtration membranes and even provide more flexible control of nanopore shape in the z dimension.more » « less
-
The imbibition of liquids into nanopores plays a critical role in numerous applications, and most prior studies focused on imbibition due to capillary flows. Here we report molecular simulations of the imbibition of water into single mica nanopores filled with pressurized gas. We show that, while capillary flow is suppressed by the high gas pressure, water is imbibed into the nanopore through surface hydration in the form of monolayer liquid films. As the imbibition front moves, the water film behind it gradually densifies. Interestingly, the propagation of the imbibition front follows a simple diffusive scaling law. The effective diffusion coefficient of the imbibition front, however, is more than ten times larger than the diffusion coefficient of the water molecules in the water film adsorbed on the pore walls. We clarify the mechanism for the rapid water imbibition observed here.more » « less
-
Abstract Much effort in the field of nanopore research has been directed toward reproducing the efficient transport phenomena of biological ion channels. For synthetic nanopores to replicate channel function on the scale of a cellular membrane, it is necessary to consider the modes of crosstalk between channels as well as to develop approaches to prepare nanopore arrays consisting of pores with different transport properties, akin to a membrane in an axon. In this manuscript, first ion concentration polarization (ICP) is identified as the primary means of the crosstalk, and subsequently, the extent and degree of ICP is tuned via targeted chemical modification of the pore walls’ functional groups. Next, two fabrication methods of a model two‐nanopore array are presented in a silicon nitride membrane in which one nanopore contains a bipolar ionic junction and functions as an ionic diode, while the other one is a homogeneously charged ionic resistor. The targeted chemical modification of a thin gold layer at the opening of one pore in an array that leaves the other pore located a few tens of nm away, unmodified, is utilized. These results provide an important framework for designing abiotic ionic circuits that can mimic physiological multichannel ion transport and communication.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1088/1361-6528/ac8c9c
