An official website of the United States government
In this study, fabrication processes of solid electrolyte/cathode interfaces for their use in next‐generation all‐solid‐state lithium‐ion battery (LIB) applications are described. Standard lithium–aluminum–titanium–phosphate (LATP) solid electrolyte and lithium–manganese oxide (LMO) spinel cathode ceramic half cells are assembled using two all‐solid‐state methods: a) co‐sintering the cathode and electrolyte materials via field‐assisted sintering and b) field‐assisted high‐temperature bonding. The morphology and composition of the interfaces are analyzed by scanning electron microscopy (SEM) and energy‐dispersive X‐ray spectroscopy (EDS). This study reveals that the formation of interphases can be significantly decreased by separately performing the densification and joining procedures. Electrochemical impedance spectroscopy (EIS) is applied to understand and determine the effect of the manufactured interfaces on the system conductivity. Based on the results, it is concluded that the high‐temperature bonding technique appears to be a suitable technique for future production of all‐solid‐state LIBs.
more »
« less
Interdigitated cathode–electrolyte architectural design for fast-charging lithium metal battery with lithium oxyhalide solid-state electrolyte
The all-solid-state battery is a promising alternative to conventional lithium-ion batteries that have reached the limit of their technological capabilities. The next-generation lithium-ion batteries are expected to be eco-friendly, long-lasting, and safe while demonstrating high energy density and providing ultrafast charging. These much-needed properties require significant efforts to uncover and utilize the chemical, morphological, and electrochemical properties of solid-state electrolytes and cathode nanocomposites. Here we report solid-state electrochemical cells based on lithium oxyhalide electrolyte that is produced by melt-casting. This method results in enhanced cathode/electrolyte interfaces that allow exceptionally high charging rates (>4000C) while maintaining the electrochemical stability of solid-state electrolyte in the presence of lithium metal anode and lithium iron phosphate-based cathode. The cells exhibit long cycle life (>1800 cycles at 100 °C) and offer a promising route to the next-generation all-solid-state battery technology.
more »
« less
- Award ID(s):
- 2052611
- PAR ID:
- 10425303
- Date Published:
- Journal Name:
- Materials Advances
- Volume:
- 3
- Issue:
- 24
- ISSN:
- 2633-5409
- Page Range / eLocation ID:
- 8947 to 8957
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Realizing extreme fast charging (XFC) in lithium‐ion batteries for electric vehicles is still challenging due to the insufficient lithium‐ion transport kinetics, especially in the electrolyte. Herein, a novel high‐performance electrolyte (HPE) consisting of lithium bis(fluorosulfonyl)imide (LiFSI), lithium hexafluorophosphate (LiPF6) and carbonates is proposed and tested in pilot‐scale, 2‐Ah pouch cells. Moreover, the origin of improved electrochemical performance is comprehensively studied via various characterizations, suggesting that the proposed HPE exhibits high ionic conductivity and excellent electrochemical stability at high charging rate of 6‐C. Therefore, the HPE‐based pouch cells deliver improved discharge specific capacity and excellent long‐term cyclability up to 1500 cycles under XFC conditions, which is superior to the conventional state‐of‐the‐art baseline electrolyte.more » « less
-
Metal-ion batteries (e.g., lithium and sodium ion batteries) are the promising power sources for portable electronics, electric vehicles, and smart grids. Recent metal-ion batteries with organic liquid electrolytes still suffer from safety issues regarding inflammability and insufficient lifetime.1 As the next generation energy storage devices, all-solid-state batteries (ASSBs) have promising potentials for the improved safety, higher energy density, and longer cycle life than conventional Li-ion batteries.2 The nonflammable solid electrolytes (SEs), where only Li ions are mobile, could prevent battery combustion and explosion since the side reactions that cause safety issues as well as degradation of the battery performance are largely suppressed. However, their practical application is hampered by the high resistance arising at the solid–solid electrode–electrolyte interface (including cathode-electrolyte interface and anode-electrolyte interface).3 Several methods have been introduced to optimize the contact capability as well as the electrochemical/chemical stability between the metal anodes (i.e.: Li and Na) and the SEs, which exhibited decent results in decreasing the charge transfer resistance and broadening the range of the stable energy window (i.e., lowing the chemical potential of metal anode below the highest occupied molecular orbital of the SEs).4 Nevertheless, mitigation for the cathode in ASSB is tardily developed because: (1) the porous structure of the cathode is hard to be infiltrated by SEs;5 (2) SEs would be oxidized and decomposed by the high valence state elements at the surface of the cathode at high state of charge.5 Herein, we demonstrate a universal cathode design strategy to achieve superior contact capability and high electrochemical/chemical stability with SEs. Stereolithography is adopted as a manufacturing technique to realize a hierarchical three-dimensional (HTD) electrode architecture with micro-size channels, which is expected to provide larger contact areas with SEs. Then, the manufactured cathode is sintered at 700 °C in a reducing atmosphere (e.g.: H2) to accomplish the carbonization of the resin, delivering sufficiently high electronic conductivity for the cathode. To avoid the direct exposure of the cathode active materials to the SEs, oxidative chemical vapor deposition technique (oCVD) is leveraged to build conformal and highly conducting poly(3,4-ethylenedioxythiophene) (PEDOT) on the surface of the HTD cathode.6 To demonstrate our design strategy, both NCM811 and Na3V2(PO4)3 is selected as active materials in the HTD cathode, then each cathode is paired with organic (polyacrylonitrile-based) and inorganic (sulfur-based) SEs assembled into two batteries (total four batteries). SEM and TEM reveal the micro-size HTD structure with built-in channels. Featured by the HTD architecture, the intrinsic kinetic and thermodynamic conditions will be enhanced by larger surface contact areas, more active sites, improved infusion and electrolyte ion accessibility, and larger volume expansion capability. Disclosed by X-ray computed tomography, the interface between cathode and SEs in the four modified samples demonstrates higher homogeneity at the interface between the cathode and SEs than that of all other pristine samples. Atomic force microscopy is employed to measure the potential image of the cross-sectional interface by the peak force tapping mode. The average potential of modified samples is lower than that of pristine samples, which confirms a weakened space charge layer by the enhanced contact capability. In addition, through Electron Energy Loss Spectroscopy coupled with Scanning Transmission Electron Microscopy, the preserved interface between HTD cathode and SE is identified; however, the decomposing of the pristine cathode is clearly observed. In addition, Finite element method simulations validate that the diffusion dynamics of lithium ions is favored by HTD structure. Such a demonstrated universal strategy provides a new guideline to engineer cathode electrolyte interface by reconstructing electrode structures that can be applicable to all solid-state batteries in a wide range of chemical conditions.more » « less
-
A major challenge for lithium-containing electrochemical systems is the formation of lithium carbonates. Solid-state electrolytes circumvent the use of organic liquids that can generate these species, but they are still susceptible to Li2CO3 formation from exposure to water vapor and carbon dioxide. It is reported here that trace quantities of Li2CO3, which are re-formed following standard mitigation and handling procedures, can decompose at high charging potentials and degrade the electrolyte–cathode interface. Operando electrochemical mass spectrometry (EC–MS) is employed to monitor the outgassing of solid-state batteries containing the garnet electrolyte Li7La3Zr2O12 (LLZO) and using appropriate controls CO2 and O2 are identified to emanate from the electrolyte–cathode interface at charging potentials > 3.8 V (vs Li/Li+). The gas evolution is correlated with a large increase in cathode interfacial resistance observed by potential-resolved impedance spectroscopy. This is the first evidence of electrochemical decomposition of interfacial Li2CO3 in garnet cells and suggests a need to report “time-to-assembly” for cell preparation methodsmore » « less
-
Abstract A class of organic‐inorganic hybrid electrolyte with ion pair integrated network (X‐POSS‐IL‐LiTFSI) has been prepared by crosslinking of oligomeric octasilsesquioxanes grafted with imidazolium‐based ionic liquids for solid state lithium ion battery applications. X‐POSS‐IL‐LiTFSI is thermally stable and highly amorphous, and shows high ionic conductivities and excellent electrochemical stability. With further immobilization of a small fraction of ionic liquid, the ionic conductivity of X‐POSS‐IL‐LiTFSI has been significantly improved, e. g. 1.4×10−4 S/cm at ambinet temperature, to the level required by the practical battery applications, while maintaining the demensional integity. The coin cells of lithium batteries with the plasticized X‐POSS‐IL‐LiTFSI electrolytes exhibit high specific capacities at both ambient and elevated temperatures.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d2ma00512c
