An official website of the United States government
Abstract Germanate glasses are of particular interest for their excellent optical properties as well as their abnormal structural changes that appear with the addition of modifiers, giving rise to the so‐calledgermanate anomaly. This anomaly refers to the nonmonotonic compositional scaling of properties exhibited by alkali germanate glasses and has been studied with various spectroscopy techniques. However, it has been difficult to understand its atomic scale origin, especially since the germanium nucleus is not easily observed by nuclear magnetic resonance. To gain insights into the mechanisms of the germanate anomaly, we have constructed a structural model using statistical mechanics and topological constraint theory to provide an accurate prediction of alkali germanate glass properties. The temperature onsets for the rigid bond constraints are deduced from in situ Brillouin light scattering, and the number of constraints is shown to be accurately calculable using statistical methods. The alkali germanate model accurately captures the effect of the germanate anomaly on glass transition temperature, liquid fragility, and Young's modulus. We also reveal that compositional variations in the glass transition temperature and Young's modulus are governed by the O–Ge–O angular constraints, whereas the variations in fragility are governed by the Ge–O radial constraints.
more »
« less
Tissue‐Adaptive Materials with Independently Regulated Modulus and Transition Temperature
Abstract The ability of living species to transition between rigid and flexible shapes represents one of their survival mechanisms, which has been adopted by various human technologies. Such transition is especially desired in medical devices as rigidity facilitates the implantation process, while flexibility and softness favor biocompatibility with surrounding tissue. Traditional thermoplastics cannot match soft tissue mechanics, while gels leach into the body and alter their properties over time. Here, a single‐component system with an unprecedented drop of Young's modulus by up to six orders of magnitude from the GPa to kPa level at a controlled temperature within 28–43 °C is demonstrated. This approach is based on brush‐like polymer networks with crystallizable side chains, e.g., poly(valerolactone), affording independent control of melting temperature and Young's modulus by concurrently altering side chain length and crosslink density. Softening down to the tissue level at the physiological temperature allows the design of tissue‐adaptive implants that can be inserted as rigid devices followed by matching the surrounding tissue mechanics at body temperature. This transition also enables thermally triggered release of embedded drugs for anti‐inflammatory treatment.
more »
« less
- PAR ID:
- 10455566
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 32
- Issue:
- 50
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Brush-like elastomers with crystallizable side chains hold promise for biomedical applications requiring the presence of two distinct mechanical states below and above body temperature: hard and supersoft. The hard semicrystalline state facilitates piercing of the body whereupon the material softens to match the mechanics of surrounding soft tissue. To understand the transition between the two states, the crystallization process was studied with synchrotron X-ray scattering for a series of brush elastomers with poly(ε-caprolactone) side chains bearing from 7 to 13 repeat units. The so-called bottlebrush correlation peak was used to monitor configuration of bottlebrush backbones in the amorphous regions during the crystallization process. In the course of crystallization, the backbones are expelled into the interlamellar amorphous gaps, which is accompanied by their conformational changes and leads to partitioning to unconfined (melt) and confined (semicrystalline) (conformational) states. The crystallization process starts by consumption of the unconfined macromolecules by the growing crystals followed by reconfiguration of macromolecules within the already grown spherulites.more » « less
-
The freestanding ferroelectric membranes with super-elasticity show promising applications in flexible electronic devices such as transducers, memories, etc. While there have been recent studies on the effect of mechanical bending on the domain structure evolutions and phase transitions in ferroelectric membranes, its influence on Young's modulus of these freestanding membranes is less explored, which is crucial for the design and application of flexible electronics. Here, a phase-field model is developed to simulate the tunability of Young's modulus of freestanding Ba1−xSrxTiO3 membranes under mechanical bending. It is demonstrated that the bended membrane shows a uniform Young's modulus compared with unbended membrane. By increasing the bending angle, Young's modulus tunability is enhanced, which can be attributed to the vortex-like domain structures induced by the mechanical bending. These vortex-like domains with large domain wall energy inhibit the subsequent domain switching under externally applied tensile strain and reduce the eigenstrain variation, which leads to a large Young's modulus. In addition, the formation of vortex domain structure is suppressed with increasing Sr2+ content in Ba1−xSrxTiO3 membranes at the same bending degree, resulting in a decrease in Young's modulus tunability. Our work reveals that the tunability of Young's modulus of freestanding ferroelectric membranes can be achieved by mechanical bending, which provides guidance for designing flexible electronic devices.more » « less
-
Narrow-channel accumulated body nMOSFET devices with p-type side gates surrounding the active area have been electrically characterized between 100 and 400 K with varied side-gate biasing ( Vside ). The subthreshold slope (SS) and drain induced barrier lowering (DIBL) decrease and threshold voltage ( Vt ) increases linearly with reduced temperature and reduced side-gate bias. Detailed analysis on a 27 nm × 78 nm (width × length) device shows SS decreasing from 115 mV/dec at 400 K to 90 mV/dec at 300 K and down to 36 mV/dec at 100 K, DIBL decreasing by approximately 10 mV/V for each 100 K reduction in operating temperature, and Vt increasing from 0.42 to 0.61 V as the temperature is reduced from 400 to 100 K. Vt can be adjusted from ∼ 0.3 to ∼ 1.1 V with ∼ 0.3 V/V sensitivity by depletion or accumulation of the body of the device using Vside . This high level of tunability allows electronic control of Vt and drive current for variable temperature operation in a wide temperature range with extremely low leakage currents ( < 10 −13 A).more » « less
-
Abstract Integration of conductive electrodes with 3D tissue models can have great potential for applications in bioelectronics, drug screening, and implantable devices. As conventional electrodes cannot be easily integrated on 3D, polymeric, and biocompatible substrates, alternatives are highly desirable. Graphene offers significant advantages over conventional electrodes due to its mechanical flexibility and robustness, biocompatibility, and electrical properties. However, the transfer of chemical vapor deposition graphene onto millimeter scale 3D structures is challenging using conventional wet graphene transfer methods with a rigid poly (methyl methacrylate) (PMMA) supportive layer. Here, a biocompatible 3D graphene transfer method onto 3D printed structure using a soft poly ethylene glycol diacrylate (PEGDA) supportive layer to integrate the graphene layer with a 3D engineered ring of skeletal muscle tissue is reported. The use of softer PEGDA supportive layer, with a 105times lower Young's modulus compared to PMMA, results in conformal integration of the graphene with 3D printed pillars and allows electrical stimulation and actuation of the muscle ring with various applied voltages and frequencies. The graphene integration method can be applied to many 3D tissue models and be used as a platform for electrical interfaces to 3D biological tissue system.more » « less
