An official website of the United States government
Abstract Josephson-CMOS hybrid memory leverages the high speed and low power operation of single-flux quantum logic and the high integration densities of CMOS technology. One of the commonly used type of interface circuits in Josephson-CMOS memory is a Suzuki stack, which is a latching high-voltage driver circuit. Suzuki stack circuits are typically powered by an AC bias voltage that has several limitations such as synchronization and coupling effects. To address these issues, a novel DC-biased Suzuki stack circuit is proposed in this paper. As compared to a conventional AC-biased Suzuki stack circuit, the proposed DC-biased design can provide similar output voltage levels and parameter margins, approximately two times higher operating frequency, and three orders of magnitude lower heat load of bias cables.
more »
« less
High-density superconductive logic circuits utilizing 0 and π Josephson junctions
Abstract Superconductor Electronics (SCE) is a fast and power-efficient technology with great potential for overcoming conventional CMOS electronics' scaling limits. Nevertheless, the primary challenge confronting SCE today is its integration level, which lags several orders of magnitude behind CMOS circuits. In this study, we have innovated and simulated a novel logic family grounded in the principles of phase shifts occurring in 0 and π Josephson junctions. The fast phase logic (FPL) eliminates the need for large inductor loops and shunt resistances by combining the half-flux and phase logic. Therefore, the Josephson junction (JJ) area only limits the integration density. The cells designed with this paradigm are fast, and the clock-to-Q delay for logic cells is about 4ps. While maintaining over 50% parameter margins for wiring cells. This logic is power efficient and can increase the integration by at least 100 times in the SCE chips.
more »
« less
- Award ID(s):
- 2124453
- PAR ID:
- 10490248
- Publisher / Repository:
- IOP Publishing
- Date Published:
- Journal Name:
- Engineering Research Express
- ISSN:
- 2631-8695
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Superconductor electronics (SCE) promise computer systems with orders of magnitude higher speeds and lower energy consumption than their complementary metal–oxide semiconductor (CMOS) counterparts. At the same time, the scalability and resource utilization of superconducting systems are major concerns. Some of these concerns come from device-level challenges and the gap between SCE and CMOS technology nodes, and others come from the way Josephson junctions (JJs) are used. Toward this end, we notice that a considerable fraction of hardware resources are not involved in logic operations, but rather are used for fan-out and buffering purposes. In this article, we ask if there is a way to reduce these overheads, propose the use of JJs at the cell boundaries to increase the number of outputs that a single stage can drive, and establish a set of rules to discretize critical currents in a way that is conducive to this assignment. Finally, we explore the design trade-offs that the presented approach opens up and demonstrate its promise through detailed analog simulations and modeling analyses. Our experiments indicate that the introduced method leads to a 48% savings in the JJ count for a tree with a fan-out of 1024, as well as an average of 43% of the JJ count for signal splitting and 32% for clock splitting in ISCAS’85 benchmarks.more » « less
-
Abstract Despite superconductor electronics (SCE) advantages, the realization of SCE logic faces a significant challenge due to the absence of dense and scalable nonvolatile memory. While various nonvolatile memory technologies, including Non-destructive readout, vortex transitional memory, and magnetic memory, have been explored, designing a dense crossbar array and achieving a superconductor random-access memory remains challenging. This work introduces a novel, nonvolatile, high-density, and scalable vortex-based memory design for SCE logic called bistable vortex memory. Our proposed design addresses scaling issues with an estimated area of 10 × 10 um2while boasting zero static power with the dynamic energy consumption of 12 aJ for single-bit read and write operations. The current summation capability enables analog operations for in-memory or near-memory computational tasks. We demonstrate the efficacy of our approach with a 32 × 32 superconductor memory array operating at 20 GHz. Additionally, we showcase the accumulation property of the memory through analog simulations conducted on an 8 × 8 superconductor crossbar array.more » « less
-
Many IoT applications require high computational performance and flexibility, and FPGA is a promising candidate. However, increased computation power results in higher energy dissipation, and energy efficiency is one of the key concerns for IoT applications. In this paper, we explore adiabatic logic for designing an energy efficient configurable logic block (CLB) and compare it to the CMOS counterpart. The simulation results show that the proposed adiabatic-logic-based look-up table (LUT) has significant energy savings for the frequency range of 1 MHz to 40 MHz, and the least energy savings is at 40 MHz, which is 92.94% energy reduction compared to its CMOS counterpart. Further, the three proposed adiabatic-logic-based memory cells are 14T, 16T, and 12T designs with at least 88.2%, 84.2%, and 87.2% energy savings. Also, we evaluated the performance of the proposed CLBs using an adiabatic-logic-based LUT (AL-LUT) interfacing with adiabatic-logic-based memory cells. The proposed design shows significant energy reduction compared to a CMOS LUT interface with SRAM cells for different frequencies; the energy savings are at least 91.6% for AL-LUT 14T, 89.7% for AL-LUT 16T, and 91.3% AL-LUT 12T.more » « less
-
Abstract Atomically thin, 2D, and semiconducting transition metal dichalcogenides (TMDs) are seen as potential candidates for complementary metal oxide semiconductor (CMOS) technology in future nodes. While high‐performance field effect transistors (FETs), logic gates, and integrated circuits (ICs) made from n‐type TMDs such as MoS2and WS2grown at wafer scale have been demonstrated, realizing CMOS electronics necessitates integration of large area p‐type semiconductors. Furthermore, the physical separation of memory and logic is a bottleneck of the existing CMOS technology and must be overcome to reduce the energy burden for computation. In this article, the existing limitations are overcome and for the first time, a heterogeneous integration of large area grown n‐type MoS2and p‐type vanadium doped WSe2FETs with non‐volatile and analog memory storage capabilities to achieve a non–von Neumann 2D CMOS platform is introduced. This manufacturing process flow allows for precise positioning of n‐type and p‐type FETs, which is critical for any IC development. Inverters and a simplified 2‐input‐1‐output multiplexers and neuromorphic computing primitives such as Gaussian, sigmoid, and tanh activation functions using this non–von Neumann 2D CMOS platform are also demonstrated. This demonstration shows the feasibility of heterogeneous integration of wafer scale 2D materials.more » « less
