skip to main content


Title: Femtosecond-laser-enabled simultaneous figuring and finishing of glass with a subnanometer optical surface

We demonstrate simultaneous figuring and surface finishing of glass using a femtosecond laser. For the first time, to the best of our knowledge, we have achieved deterministic material removal with nanometer precision and maintained sub-nanometer surface roughness without inducing any mid-spatial-frequency errors to the initial surface. A dynamic pulse propagation model is established to predict the interaction process, including plasma generation and surface temperature. The interactive modeling and the experiments enable the selection of a set of laser parameters to achieve controllable optical figuring and finishing. This demonstration shows the potential for using femtosecond lasers for advanced freeform optic forming, finishing, and reduction of detrimental mid-spatial-frequency errors, and laser-ablation-based patterning used for fabrication of integrated photonics and lasers.

 
more » « less
Award ID(s):
1822049 1822026
NSF-PAR ID:
10531221
Author(s) / Creator(s):
;
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Optics Letters
Volume:
47
Issue:
15
ISSN:
0146-9592; OPLEDP
Format(s):
Medium: X Size: Article No. 3860
Size(s):
Article No. 3860
Sponsoring Org:
National Science Foundation
More Like this
  1. Freeform optics can reduce the cost, weight, and size of advanced imaging systems, but it is challenging to manufacture the complex rotationally asymmetric surfaces to optical tolerances. To address the need for disruptive, high-precision sub-aperture forming and finishing techniques for freeform optics, we investigate an alternative, non-contact polishing methodology using femtosecond lasers, combining modeling, experiments, and demonstrations. Femtosecondlaser- based polishing of germanium was investigated using an experimentally-validated twotemperature model of laser/germanium interaction to guide the understanding and selection of laser parameters to achieve near-nonthermal ablation for polishing and figuring. For the first time to our knowledge, model-guided femtosecond laser polishing of germanium was successfully demonstrated, achieving precision material removal while maintaining single-digit nanometer optical surface quality. The demonstrated femtosecond-laser-based polishing technique lays the foundation for semiconductor optics polishing/fabrication using femtosecond lasers and opens a viable path for high-precision, complex sub-aperture optical polishing tasks on various materials. © 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement 
    more » « less
  2. Fabricating freeform mirrors relies on accurate optical figuring processes capable of arbitrarily modifying low-spatial frequency height without creating higher-spatial frequency errors. We present a scalable process to accurately figure thin mirrors using stress generated by a focused ultrafast laser. We applied ultrafast laser stress figuring (ULSF) to four thin fused silica mirrors to correct them to 10-20 nm RMS over 28 Zernike terms, in 2-3 iterations, without significantly affecting higher-frequency errors. We measured the mirrors over a month and found that dielectric-coated mirrors were stable but stability of aluminum-coated mirrors was inconclusive. The accuracy and throughput for ULSF is on par with existing deterministic figuring processes, yet ULSF doesn’t significantly affect mid-spatial frequency errors, can be applied after mirror coating, and can scale to higher throughput using mature laser processing technologies. ULSF offers new potential to rapidly and accurately shape freeform mirrors.

     
    more » « less
  3. We describe the development of a data library of mid-spatial frequency surface errors for optical components. This resource enables better understanding of specification of mid-spatial frequency surface errors and their connections to optical performance. 
    more » « less
  4. We describe the development of a data library of mid-spatial frequency surface errors for optical components. This resource enables better understanding of specification of mid-spatial frequency surface errors and their connections to optical performance. 
    more » « less
  5. We apply the Nb=1 solution of the Rapidly Decaying Fourier series to fit mid-spatial frequency surface errors. Using this basis enables definition of sharp spatial frequency bandlimits for mid-spatial frequency specification of optical surfaces. 
    more » « less