Title: Ultra-sensitive current bistability and light switching in a resonant tunneling superlattice transistor
Bistability in the current–voltage characteristics of semiconductor superlattices and quantum cascade laser structures has the potential for wide-ranging applications, particularly in sensing systems. However, the interdependency of applied bias and current injection in conventional two-terminal structures has led to complications in analysis and rendered the bistability phenomenon difficult to implement in practical applications. Here, we report a new kind of electronic bistability coupled to optical switching in a resonant tunneling bipolar superlattice transistor. This bistability manifests as sharp discontinuities in the collector current with extremely small variations of the applied voltage, which arise from unstable tunneling transmission across the hetero-barrier between the two-dimensional electron gas (2DEG) at the edge of the transistor base and the collector superlattice structure. The electronic transitions between high and low quantum mechanical transmissions are demonstrated to be caused by self-consistent variations of the internal electric field at the heterointerface between the 2DEG and the superlattice. They are also present in the base current of the three-terminal device and result in sharp switching of near-infrared spontaneous light emission output from an interband radiative recombination process with a peak emission wavelength of 1.58 μm. A comprehensive quantum mechanical theoretical model accounting for the self-consistent bistable tunneling transmission is in quantitative agreement with the experimental data. The measured peak transconductance sensitivity value of 6000 mS can be used in the highly sensitive detector and non-linear device applications. more »« less
We provide a quantitative analysis of the spontaneous recombination time in the quantum well (QW) of a transistor laser (TL) that shows that owing to the heavy doping in the base of the transistor, Auger recombination is responsible for the short carrier lifetime and low quantum efficiency of the device. By taking advantage of the QW location close to the collector in the TL three-terminal configuration, we devise a new turn-off mechanism that results in quick electron tunneling through the QW barrier by applying a high base-collector reverse bias to deplete the QW and suppress further recombination. For practical base-collector reverse bias, tunneling time from the QW is on the order of 10th of picosecond, which with a lighter base doping density would simultaneously achieve a fast TL turn-off response, while reducing Auger recombination.
Abstract Harnessing resonant tunneling transport in III-nitride semiconductors to boost the operating frequencies of electronic and photonic devices, requires a thorough understanding of the mechanisms that limit coherent tunneling injection. Towards this goal, we present a concerted experimental and theoretical study that elucidates the impact of the collector doping setback on the quantum transport characteristics of GaN/AlN resonant tunneling diodes (RTDs). Employing our analytical model for polar RTDs, we quantify the width of the resonant-tunneling line shape, demonstrating that the setback helps preserve coherent injection. This design results in consistently higher peak-to-valley-current ratios (PVCRs), obtaining a maximum PVCR = 2.01 at cryogenic temperatures.
Materials with in-plane electrical anisotropy have great potential for designing artificial synaptic devices. However, natural materials with strong intrinsic in-plane electrical anisotropy are rare. We introduce a simple strategy to produce extremely large electrical anisotropy via grating gating of a semiconductor two-dimensional electron gas (2DEG) of AlGaN/GaN. We show that periodically modulated electric potential in the 2DEG induces in-plane electrical anisotropy, which is significantly enhanced in a magnetic field, leading to an ultra large electrical anisotropy. This is induced by a giant positive magnetoresistance and a giant negative magnetoresistance under two orthogonally oriented in-plane current flows, respectively. This giant electrical anisotropy is in situ tunable by tailoring both the grating gate voltage and the magnetic field. Our semiconductor device with controllable giant electrical anisotropy will stimulate new device applications, such as multi-terminal memtransistors and bionic synapses.
Liehr, Maximilian; Hazra, Jubin; Beckmann, Karsten; Mukundan, Vineetha; Alexandrou, Ioannis; Yeow, Timothy; Race, Joseph; Tapily, Kandabara; Consiglio, Steven; Kurinec, Santosh K; et al
(, Journal of Vacuum Science & Technology B)
In this work, hafnium zirconium oxide (HZO)-based 100 × 100 nm2 ferroelectric tunnel junction (FTJ) devices were implemented on a 300 mm wafer platform, using a baseline 65 nm CMOS process technology. FTJs consisting of TiN/HZO/TiN were integrated in between metal 1 (M1) and via 1 (V1) layers. Cross-sectional transmission electron microscopy and energy dispersive x-ray spectroscopy analysis confirmed the targeted thickness and composition of the FTJ film stack, while grazing incidence, in-plane x-ray diffraction analysis demonstrated the presence of orthorhombic phase Pca21 responsible for ferroelectric polarization observed in HZO films. Current measurement, as a function of voltage for both up- and down-polarization states, yielded a tunneling electroresistance (TER) ratio of 2.28. The device TER ratio and endurance behavior were further optimized by insertion of thin Al2O3 tunnel barrier layer between the bottom electrode (TiN) and ferroelectric switching layer (HZO) by tuning the band offset between HZO and TiN, facilitating on-state tunneling conduction and creating an additional barrier layer in off-state current conduction path. Investigation of current transport mechanism showed that the current in these FTJ devices is dominated by direct tunneling at low electric field (E < 0.4 MV/cm) and by Fowler–Nordheim (F–N) tunneling at high electric field (E > 0.4 MV/cm). The modified FTJ device stack (TiN/Al2O3/HZO/TiN) demonstrated an enhanced TER ratio of ∼5 (2.2× improvement) and endurance up to 106 switching cycles. Write voltage and pulse width dependent trade-off characteristics between TER ratio and maximum endurance cycles (Nc) were established that enabled optimal balance of FTJ switching metrics. The FTJ memory cells also showed multi-level-cell characteristics, i.e., 2 bits/cell storage capability. Based on full 300 mm wafer statistics, a switching yield of >80% was achieved for fabricated FTJ devices demonstrating robustness of fabrication and programming approach used for FTJ performance optimization. The realization of CMOS-compatible nanoscale FTJ devices on 300 mm wafer platform demonstrates the promising potential of high-volume large-scale industrial implementation of FTJ devices for various nonvolatile memory applications.
Kuchibhatla, Sai_Aditya Raman; Leamy, Michael J
(, Applied Physics Letters)
We experimentally demonstrate a topologically protected electroacoustic transistor. We construct a reconfigurable phononic analog of the quantum valley-Hall insulator composed of electrically shunted piezoelectric disks bonded to a patterned plate forming a monolithic structure. The device can be dynamically reconfigured to host one or more topological interface states via breaking inversion symmetry through selective powering of shunt circuits. Above a threshold, the amplitude of wave energy at a chosen location in one topological interface creates a second interface by dynamically switching power between two groups of shunts using relays. This enables the flow of wave energy between two locations in the reconfigured interface analogous to the voltage-controlled electron flow in a field effect transistor. The amplitude of wave energy in the second interface is used for bit abstraction to implement acoustic logic. We illustrate the various states of the transistor and experimentally demonstrate wave-based switching. The proposed electroacoustic transistor is envisioned to find applications in wave-based devices and edge computing in extreme environments and inspire novel technologies leveraging acoustic logic.
Kumar, Raman, Kaufman, Robert_B, Hsiao, Fu-Chen, Leburton, Jean-Pierre, and Dallesasse, John_M. Ultra-sensitive current bistability and light switching in a resonant tunneling superlattice transistor. Journal of Applied Physics 135.16 Web. doi:10.1063/5.0190385.
Kumar, Raman, Kaufman, Robert_B, Hsiao, Fu-Chen, Leburton, Jean-Pierre, and Dallesasse, John_M.
"Ultra-sensitive current bistability and light switching in a resonant tunneling superlattice transistor". Journal of Applied Physics 135 (16). Country unknown/Code not available: American Institute of Physics. https://doi.org/10.1063/5.0190385.https://par.nsf.gov/biblio/10593989.
@article{osti_10593989,
place = {Country unknown/Code not available},
title = {Ultra-sensitive current bistability and light switching in a resonant tunneling superlattice transistor},
url = {https://par.nsf.gov/biblio/10593989},
DOI = {10.1063/5.0190385},
abstractNote = {Bistability in the current–voltage characteristics of semiconductor superlattices and quantum cascade laser structures has the potential for wide-ranging applications, particularly in sensing systems. However, the interdependency of applied bias and current injection in conventional two-terminal structures has led to complications in analysis and rendered the bistability phenomenon difficult to implement in practical applications. Here, we report a new kind of electronic bistability coupled to optical switching in a resonant tunneling bipolar superlattice transistor. This bistability manifests as sharp discontinuities in the collector current with extremely small variations of the applied voltage, which arise from unstable tunneling transmission across the hetero-barrier between the two-dimensional electron gas (2DEG) at the edge of the transistor base and the collector superlattice structure. The electronic transitions between high and low quantum mechanical transmissions are demonstrated to be caused by self-consistent variations of the internal electric field at the heterointerface between the 2DEG and the superlattice. They are also present in the base current of the three-terminal device and result in sharp switching of near-infrared spontaneous light emission output from an interband radiative recombination process with a peak emission wavelength of 1.58 μm. A comprehensive quantum mechanical theoretical model accounting for the self-consistent bistable tunneling transmission is in quantitative agreement with the experimental data. The measured peak transconductance sensitivity value of 6000 mS can be used in the highly sensitive detector and non-linear device applications.},
journal = {Journal of Applied Physics},
volume = {135},
number = {16},
publisher = {American Institute of Physics},
author = {Kumar, Raman and Kaufman, Robert_B and Hsiao, Fu-Chen and Leburton, Jean-Pierre and Dallesasse, John_M},
}
Warning: Leaving National Science Foundation Website
You are now leaving the National Science Foundation website to go to a non-government website.
Website:
NSF takes no responsibility for and exercises no control over the views expressed or the accuracy of
the information contained on this site. Also be aware that NSF's privacy policy does not apply to this site.
An official website of the United States government
