More Like this

1. A Self‐Healing, Flowable, Yet Solid Electrolyte Suppresses Li‐Metal Morphological Instabilities

   https://doi.org/10.1002/adma.202406315  

   He, Yubin; Wang, Chunyang; Lin, Ruoqian; Hu, Enyuan; Trask, Stephen E; Li, Ju; Xin, Huolin L (December 2024, Advanced Materials)

   Abstract Lithium metal (Li⁰) solid‐state batteries encounter implementation challenges due to dendrite formation, side reactions, and movement of the electrode–electrolyte interface in cycling. Notably, voids and cracks formed during battery fabrication/operation are hot spots for failure. Here, a self‐healing, flowable yet solid electrolyte composed of mobile ceramic crystals embedded in a reconfigurable polymer network is reported. This electrolyte can auto‐repair voids and cracks through a two‐step self‐healing process that occurs at a fast rate of 5.6 µm h⁻¹. A dynamical phase diagram is generated, showing the material can switch between liquid and solid forms in response to external strain rates. The flowability of the electrolyte allows it to accommodate the electrode volume change during Li⁰stripping. Simultaneously, the electrolyte maintains a solid form with high tensile strength (0.28 MPa), facilitating the regulation of mossy Li⁰deposition. The chemistries and kinetics are studied by operando synchrotron X‐ray and in situ transmission electron microscopy (TEM). Solid‐state NMR reveals a dual‐phase ion conduction pathway and rapid Li⁺diffusion through the stable polymer‐ceramic interphase. This designed electrolyte exhibits extended cycling life in Li⁰–Li⁰cells, reaching 12 000 h at 0.2 mA cm⁻²and 5000 h at 0.5 mA cm⁻². Furthermore, owing to its high critical current density of 9 mA cm⁻², the Li⁰–LiNi_0.8Mn_0.1Co_0.1O₂(NMC811) full cell demonstrates stable cycling at 5 mA cm⁻²for 1100 cycles, retaining 88% of its capacity, even under near‐zero stack pressure conditions. 

   more » « less
2. Concentrated ternary ether electrolyte allows for stable cycling of a lithium metal battery with commercial mass loading high‐nickel NMC and thin anodes

   https://doi.org/10.1002/cey2.275  

   Yang, Jun; Li, Xing; Qu, Ke; Wang, Yixian; Shen, Kangqi; Jiang, Changhuan; Yu, Bo; Luo, Pan; Li, Zhuangzhi; Chen, Mingyang; et al (March 2023, Carbon Energy)

   Abstract A new concentrated ternary salt ether‐based electrolyte enables stable cycling of lithium metal battery (LMB) cells with high‐mass‐loading (13.8 mg cm⁻², 2.5 mAh cm⁻²) NMC622 (LiNi_0.6Co_0.2Mn_0.2O₂) cathodes and 50 μm Li anodes. Termed “CETHER‐3,” this electrolyte is based on LiTFSI, LiDFOB, and LiBF₄with 5 vol% fluorinated ethylene carbonate in 1,2‐dimethoxyethane. Commercial carbonate and state‐of‐the‐art binary salt ether electrolytes were also tested as baselines. With CETHER‐3, the electrochemical performance of the full‐cell battery is among the most favorably reported in terms of high‐voltage cycling stability. For example, LiNi_xMn_yCo_1–x–yO₂(NMC)‐Li metal cells retain 80% capacity at 430 cycles with a 4.4 V cut‐off and 83% capacity at 100 cycles with a 4.5 V cut‐off (charge at C/5, discharge at C/2). According to simulation by density functional theory and molecular dynamics, this favorable performance is an outcome of enhanced coordination between Li⁺and the solvent/salt molecules. Combining advanced microscopy (high‐resolution transmission electron microscopy, scanning electron microscopy) and surface science (X‐ray photoelectron spectroscopy, time‐of‐fight secondary ion mass spectroscopy, Fourier‐transform infrared spectroscopy, Raman spectroscopy), it is demonstrated that a thinner and more stable cathode electrolyte interphase (CEI) and solid electrolyte interphase (SEI) are formed. The CEI is rich in lithium sulfide (Li₂SO₃), while the SEI is rich in Li₃N and LiF. During cycling, the CEI/SEI suppresses both the deleterious transformation of the cathode R‐3m layered near‐surface structure into disordered rock salt and the growth of lithium metal dendrites. 

   more » « less
3. High-performance all-solid-state batteries enabled by salt bonding to perovskite in poly(ethylene oxide)

   https://doi.org/10.1073/pnas.1907507116  

   Xu, Henghui; Chien, Po-Hsiu; Shi, Jianjian; Li, Yutao; Wu, Nan; Liu, Yuanyue; Hu, Yan-Yan; Goodenough, John B. (September 2019, Proceedings of the National Academy of Sciences)

   Flexible and low-cost poly(ethylene oxide) (PEO)-based electrolytes are promising for all-solid-state Li-metal batteries because of their compatibility with a metallic lithium anode. However, the low room-temperature Li-ion conductivity of PEO solid electrolytes and severe lithium-dendrite growth limit their application in high-energy Li-metal batteries. Here we prepared a PEO/perovskite Li 3/8 Sr 7/16 Ta 3/4 Zr 1/4 O 3 composite electrolyte with a Li-ion conductivity of 5.4 × 10 −5 and 3.5 × 10 −4 S cm −1 at 25 and 45 °C, respectively; the strong interaction between the F − of TFSI − (bis-trifluoromethanesulfonimide) and the surface Ta 5+ of the perovskite improves the Li-ion transport at the PEO/perovskite interface. A symmetric Li/composite electrolyte/Li cell shows an excellent cyclability at a high current density up to 0.6 mA cm −2 . A solid electrolyte interphase layer formed in situ between the metallic lithium anode and the composite electrolyte suppresses lithium-dendrite formation and growth. All-solid-state Li|LiFePO 4 and high-voltage Li|LiNi 0.8 Mn 0.1 Co 0.1 O 2 batteries with the composite electrolyte have an impressive performance with high Coulombic efficiencies, small overpotentials, and good cycling stability. 

   more » « less
4. In Situ Engineering of Inorganic‐Rich Solid Electrolyte Interphases via Anion Choice Enables Stable, Lithium Anodes

   https://doi.org/10.1002/adma.202305645  

   Weeks, Jason A; Burrow, James N; Diao, Jiefeng; Paul‐Orecchio, Austin G; Srinivasan, Hrishikesh S; Vaidyula, Rinish Reddy; Dolocan, Andrei; Henkelman, Graeme; Mullins, C Buddie (March 2024, Advanced Materials)

   Abstract The discovery of liquid battery electrolytes that facilitate the formation of stable solid electrolyte interphases (SEIs) to mitigate dendrite formation is imperative to enable lithium anodes in next‐generation energy‐dense batteries. Compared to traditional electrolyte solvents, tetrahydrofuran (THF)‐based electrolyte systems have demonstrated great success in enabling high‐stability lithium anodes by encouraging the decomposition of anions (instead of organic solvent) and thus generating inorganic‐rich SEIs. Herein, by employing a variety of different lithium salts (i.e., LiPF_6,LiTFSI, LiFSI, and LiDFOB), it is demonstrated that electrolyte anions modulate the inorganic composition and resulting properties of the SEI. Through novel analytical time‐of‐flight secondary‐ion mass spectrometry methods, such as hierarchical clustering of depth profiles and compositional analysis using integrated yields, the chemical composition and morphology of the SEIs generated from each electrolyte system are examined. Notably, the LiDFOB electrolyte provides an exceptionally stable system to enable lithium anodes, delivering >1500 cycles at a current density of 0.5 mAh g⁻¹and a capacity of 0.5 mAh g⁻¹in symmetrical cells. Furthermore, Li//LFP cells using this electrolyte demonstrate high‐rate, reversible lithium storage, supplying 139 mAh g_(LFP)⁻¹at C/2 (≈0.991 mAh cm⁻², @ 0.61 mA cm⁻²) with 87.5% capacity retention over 300 cycles (average Coulombic efficiency >99.86%). 

   more » « less
5. Regulating Li‐Ion Transport through Ultrathin Molecular Membrane to Enable High‐Performance All‐Solid‐State–Battery

   https://doi.org/10.1002/smll.202303625  

   Rajendran, Sathish; George, Antony; Tang, Zian; Neumann, Christof; Turchanin, Andrey; Arava, Leela Mohana (November 2023, Small)

   Abstract Solid‐state lithium metal batteries with garnet‐type electrolyte provide several advantages over conventional lithium‐ion batteries, especially for safety and energy density. However, a few grand challenges such as the propagation of Li dendrites, poor interfacial contact between the solid electrolyte and the electrodes, and formation of lithium carbonate during ambient exposure over the solid‐state electrolyte prevent the viability of such batteries. Herein, an ultrathin sub‐nanometer porous carbon nanomembrane (CNM) is employed on the surface of solid‐state electrolyte (SSE) that increases the adhesion of SSE with electrodes, prevents lithium carbonate formation over the surface, regulates the flow of Li‐ions, and blocks any electronic leakage. The sub‐nanometer scale pores in CNM allow rapid permeation of Li‐ions across the electrode–electrolyte interface without the presence of any liquid medium. Additionally, CNM suppresses the propagation of Li dendrites by over sevenfold up to a current density of 0.7 mA cm⁻²and enables the cycling of all‐solid‐state batteries at low stack pressure of 2 MPa using LiFePO₄cathode and Li metal anode. The CNM provides chemical stability to the solid electrolyte for over 4 weeks of ambient exposure with less than a 4% increase in surface impurities. 

   more » « less