Search for: All records

ABSTRACT Paleomagnetic data from the Insular superterrane and related terranes in the western Canadian and northern U.S. Cordillera seem to indicate large-magnitude (~4000 km), northward translations along the western margin of the North American Cordillera in the Late Cretaceous (the Baja–British Columbia [Baja-BC] hypothesis). This model postulates that initial collision of the Insular superterrane occurred in southern California and/or northern Baja Mexico prior to dextral translation along the western North American margin from 85 to 55 Ma. A major unresolved problem with the Baja-BC hypothesis is that faults that could have accommodated large-magnitude translation are missing or obscured by later Cenozoic faulting and/or sedimentary cover. Here, we explored the deformation record of Late Cretaceous ductile shear zones in southern California with the goal of understanding the timing and kinematics of deformation at this time. We focused on the Alamo Mountain and Piru Creek shear zones, located within the central Transverse Ranges. The kinematics of these shear zones help to elucidate whether southern California was experiencing predominantly dextral or sinistral faulting during the time of postulated large-magnitude northward translation along the western margin of the North American Cordillera. This information in turn allows for assessment and refinement of the Baja-BC hypothesis. We report new field observations and 21 U-Pb laser ablation–inductively coupled plasma–mass spectrometry zircon ages from deformed and undeformed host rocks and dikes. We find that ductile shear zones in the Alamo Mountain region are localized at the boundary between Paleoproterozoic gneisses and Mesozoic plutons. High-strain rocks consist of quartzofeldspathic mylonites and phyllonites up to 750 m thick, and both shear zones record sinistral strike-slip to sinistral-normal motion with a predominantly top-to-the-NW sense of shear in their present-day orientations. Our data show that the Alamo Mountain and Piru Creek shear zones were active at ca. 76–72 Ma and possibly included an earlier phase of deformation. When Cenozoic block rotations are restored, we find that the Alamo Mountain and Piru Creek shear zones originated as NNW-SSE–striking, moderately ENE-dipping shear zones that formed at midcrustal conditions (500–600 °C and 4 kbar). Structural analysis of the shear zones indicates that the dominant component of motion was sinistral strike-slip and that the dip-slip component of motion was minor. The timing and kinematics of deformation in the Alamo Mountain and Piru Creek shear zones are similar to others in the Southern California Batholith, including the Nacimiento fault, the Mill Canyon window, and the Black Belt and Cucamonga shear zones (eastern San Gabriel Mountains), and the Tumamait shear zone (Pine Mountain block). The presence of this regionally extensive, sinistral shear zone system and the absence of dextral shear zones require reevaluation of the Baja-BC hypothesis in southern California during the Late Cretaceous. 

Abstract Structural analyses combined with U-Pb zircon petrochronology show the influence of arc magmatism on the evolution of two transpressional shear zones in the deep root of the Late Cretaceous Southern California batholith. The mid-crustal Black Belt and lower-crustal Cucamonga shear zones (eastern San Gabriel Mountains, California, USA) formed at ca. 84 Ma, shortly after a large mass of tonalite and granodiorite intruded the lower crust. Both shear zones were active until at least ca. 74 Ma and probably until 72–70 Ma. In the mid-crustal shear zone, rheological contrasts between mingling magmas localized deformation at dike margins. The deformation began as hypersolidus flow in partially crystallized dikes and then transitioned to deformation below the solidus when alternations between viscous creep and brittle faulting produced interlayered pseudotachylyte, cataclasite, and mylonite. As the dikes solidified, strain hardening drove shear zone growth and created thin (10–30 m) high-strain zones and faults that are widely spaced across ~1 km. In contrast, the lower-crustal Cucamonga shear zone was magma-starved, lacks the variety of shear zone fabrics exhibited by its mid-crustal counterpart, and formed by the reactivation of a preexisting fabric that records pure reverse displacements at 124–93 Ma. The two shear zones created a partitioned style of intra-arc transpression where sinistral-reverse (mostly arc-parallel with some arc-oblique) displacements were accommodated on moderately dipping faults and shear zones and arc-normal shortening was accommodated by coeval folds. This study shows how a magmatic surge influenced the architecture and style of Late Cretaceous transpression in the Southern California batholith, including the evolution of high-strain zones that record alternating episodes of brittle, ductile, and hypersolidus deformation. The results illustrate how magmatism localizes strain on deep-crustal faults during orogenesis and oblique convergence. 

Abstract We explore the growth of lower-continental crust by examining the root of the Southern California Batholith, an ~500-km-long, paleo-arc segment of the Mesozoic California arc that lies between the southern Sierra Nevada Batholith and northern Peninsular Ranges Batholith. We focus on the Cucamonga and San Antonio terranes located in the eastern San Gabriel Mountains where the deep root of the Mesozoic arc is exhumed by the Quaternary Cucamonga thrust fault. This lower- to mid-crustal cross section of the arc allows us to investigate (1) the timing and rates of Mesozoic arc construction, (2) mechanisms of sediment incorporation into the lower crust, and (3) the interplay between mantle input and crustal recycling during arc magmatic surges. We use U-Pb detrital zircon geochronology of four quartzites and one metatexite migmatite to investigate the origin of the lower-crustal Cucamonga metasedimentary sequence, and U-Pb zircon petrochronology of 26 orthogneisses to establish the timing of arc magmatism and granulite-facies metamorphism. We find that the Cucamonga metasedimentary sequence shares broad similarities to Sur Series metasedimentary rocks in the Salinia terrane, suggesting that both were deposited in a late Paleozoic to early Mesozoic forearc or intra-arc basin marginal to the Southern California Batholith. This basin was progressively underthrust beneath the arc during the Middle Jurassic to Late Cretaceous and was metamorphosed during two high-grade (>750 °C), metamorphic events at ca. 124 Ma and 89–75 Ma. These metamorphic events were associated with 100 m.y. of arc magmatism that lasted from 175 Ma to 75 Ma and culminated in a magmatic surge from ca. 90 Ma to 75 Ma. Field observations and petrochronology analyses indicate that partial melting of the underthrust Cucamonga metasedimentary rocks was triggered by the emplacement of voluminous, mid-crustal tonalites and granodiorites. Partial melting of the metasedimentary rocks played a subsidiary role relative to mantle input in driving the Late Cretaceous magmatic flare-up event. 

High-Sr/Y granitoids in continental settings are sometimes erroneously regarded as the products derived from partial melting of thickened/delaminated mafic lower curst under relatively higher pressures (1.5 GPa) in a collisional orogenic setting. In fact, multiple magmatic processes in the trans-crustal magma system, such as recycling of antecrysts, crustal assimilation, and fractional crystallization, can create or modify the primary “adakitic” signature. As a result, the generation of adakitic magmas in continental settings remains controversial from a bulk-rock perspective. Here, we address the origin of adakitic plutonic rocks through geochemical and textural characterization of rock-forming minerals in the pyroxene-bearing Zhuyuan granodiorite, West Qinling, China. The Zhuyuan granodiorite formed in a post-collisional setting and primarily consists of resorbed orthopyroxene, three types of clinopyroxene, amphibole, two types of plagioclases, K-feldspar, biotite, and quartz. Type-1 Cpx has high XMg (70.0–81.7). Type-2 Cpx displays normal zoning and decreasing XMg (80.9 to 71.5) from the core to rim. Type-3 Cpx is reversely zoned, where the rims have higher XMg (75.5–86.9), Ni, Cr, suggesting a recharge event. Orthopyroxene has high-Ni and -Cr contents, as well as high XMg (80.9–82.8), indicative of antecrysts that grew in mafic magma reservoirs. The injection of magmas from different sources is supported by sieve-textured plagioclase and crystal size distributions of non-poikilitic amphibole. Finally, non-sieve textured plagioclase, biotite, K-feldspar, and quartz are late-crystallized phases, indicative of an orthocrystic origin. The melts in equilibrium with these orthocrysts display significantly higher Sr/Y values than the magma batches that crystallized other mafic phases (i.e., amphibole, clinopyroxene, and orthopyroxene). Thus, we propose that the system involved an initial high-Sr/Y melts in equilibrium with the orthocryst assemblage was generated by water-fluxed melting of intermediate to felsic sources. The addition of low Sr/Y non-orthocrysts (e.g., amphibole and pyroxene) and associated melt diluted the original “adakitic signal” in the magma reservoir and drove the bulk composition to more mafic values. Consequently, the Zhuyuan pyroxene-bearing granodiorite represents a mixture of crystals with diverse origins and distinct magma batches of various compositions (from felsic to mafic compositions). Our study emphasizes that the origin of adakitic granitoids cannot be clearly deciphered without geochemical analysis of the constituent minerals. We also suggest that Sr/Y values in plutons should be cautiously used in paleo-crustal thickness estimates in collisional settings because of possible open system scenarios as described here. 

Abstract The Laramide orogeny is a pivotal time in the geological development of western North America, but its driving mechanism is controversial. Most prominent models suggest this event was caused by the collision of an oceanic plateau with the Southern California Batholith (SCB) which caused the angle of subduction beneath the continent to shallow and led to shut-down of the arc. Here, we use over 280 zircon and titanite Pb/U ages from the SCB to establish the timing and duration of magmatism, metamorphism and deformation. We show that magmatism was surging in the SCB from 90 to 70 Ma, the lower crust was hot, and cooling occurred after 75 Ma. These data contradict plateau underthrusting and flat-slab subduction as the driving mechanism for early Laramide deformation. We propose that the Laramide orogeny is a two-stage event consisting of: 1) an arc ‘flare-up’ phase in the SCB from 90-75 Ma; and 2) a widespread mountain building phase in the Laramide foreland belt from 75-50 Ma that is linked to subduction of an oceanic plateau. 

We present a new method of linking microstructures, electron backscatter diffraction (EBSD)–derived crystallographic vorticity axis (CVA) analysis, and titanite petrochronology to directly link fabric development to specific deformation events in shear zone rocks with complex histories. This approach is particularly useful where overprinting is incomplete, such that it is unknown which fabric is being dated by the petrochronometer. Here, we compared single-phase CVA patterns of fabric-forming minerals with those of synkinematic petrochronometers (e.g., titanite) to associate the timing of fabric development with deformational events in the middle crust of the George Sound shear zone, Fiordland, New Zealand. The host rocks to the George Sound shear zone include the Carboniferous Large Pluton, where titanite petrochronology demonstrates an unequivocally Cretaceous age of metamorphic titanite growth within mylonitic foliation. However, the host rocks show two distinct CVA patterns: a transtensional deformation event recorded by quartz and plagioclase, and a pure-shear–dominated transpressional deformation event recorded by biotite and titanite. Therefore, the transpressional CVA pattern of the titanite, coupled with its Cretaceous age, shows that it cannot be used to date the quartz and plagioclase fabric developed in response to an older transtensional deformation event. These results demonstrate the necessity of combining EBSD and CVA analysis with petrochronology to demonstrate that synkinematic accessory phase petrochronometers show the same kinematic deformation geometry (i.e., CVA pattern) as the fabric being dated. 

Bulk-rock data are commonly used in geochemical studies as a proxy for melt compositions in order to understand the evolution of crustal melts. However, processes of crystal accumulation and melt migration out of deep-crustal, crystal-rich mush zones to shallower storage regions raise questions about how faithfully bulk-rock compositions in plutons approximate melt compositions. This problem is particularly acute in the lower crust of arcs, where melt reservoirs are subject to periodic melt extraction that leaves behind a cumulate residue. Here, we examine bulk-rock data from the perspective of high-Sr/Y plutonic rocks in the lower crust of a well-exposed Early Cretaceous cordilleran-arc system in Fiordland, New Zealand. We test the validity of using high-Sr/Y bulk-rock compositions as proxies for melts by comparing bulk-rock compositions to melts modeled from >100 major- and trace-element analyses of 23 magmatic clinopyroxene grains from the same samples. The sampling locations of the igneous clinopyroxenes and encompassing bulk rocks are distributed across ~550 km2 of exhumed lower crust and are representative of Mesozoic lower-crustal arc rocks in the Median batholith. We confirm that bulk-rock data have characteristics of high-Sr/Y plutons (Sr/Y >50, Na2O >3.5 wt%, Sr >1000 ppm, and Y <20 ppm), features that have been previously interpreted to indicate the presence of garnet as a residual or fractionating phase. In contrast to bulk rocks, igneous clinopyroxenes have low Sr (<100 ppm), high Y (25–100 ppm), and low molar Mg# [100 × Mg/(Mg + Fe)] values (60–70), which are consistent with derivation from fractionated, low-Sr/Y melts. Chondrite-normalized rare-earth-element patterns and Sm/Yb values in clinopyroxenes also show little to no evidence for involvement of garnet in the source or in differentiation processes. Fe-Mg partitioning relationships indicate that clinopyroxenes are not in equilibrium with their encompassing bulk rocks but could have been in equilibrium with melt compositions determined from chemometry of coexisting igneous hornblendes. Moho-depth calculations based on bulk-rock Sr/Y values also yield Moho depths (average = 69 km) that are inconsistent with Moho depths based on bulk-rock Ce/Y, contact aureole studies, Al-in-horn- blende crystallization pressures, and our modeled clinopyroxene crystallization pressures. These data indicate that most Mesozoic high-Sr/Y bulk rocks in the lower crust of Fiordland are cumulates formed by plagioclase + amphibole + clinopyroxene accumulation and interstitial melt loss from crystal-rich mush zones. Our data do not support widespread fractionation of igneous garnet nor partial melting of a garnet-bearing source in the petrogenesis of these melts. We speculate that melt extraction and the production of voluminous cumulates in the lower crust were aided by unusually high heat flow and high magma addition rates associated with an Early Cretaceous arc flareup. We conclude that bulk-rock compositions are poor proxies for melt compositions in the lower crust of the Median batholith, and geochemical modeling of these high-Sr/Y bulk rocks would overemphasize the role of garnet in their petrogenesis. 

Abstract We present microbeam major- and trace-element data from 14 monzodiorites collected from the Malaspina Pluton (Fiordland, New Zealand) with the goal of evaluating processes involved in the production of andesites in lower arc crust. We focus on relict igneous assemblages consisting of plagioclase and amphibole with lesser amounts of clinopyroxene, orthopyroxene, biotite and quartz. These relict igneous assemblages are heterogeneously preserved in the lower crust within sheeted intrusions that display hypersolidus fabrics defined by alignment of unstrained plagioclase and amphibole. Trace-element data from relict igneous amphiboles in these rocks reveal two distinct groups: one relatively enriched in high field strength element concentrations and one relatively depleted. The enriched amphibole group has Zr values in the range of ∼25–110 ppm, Nb values of ∼5–32 ppm, and Th values up to 2·4 ppm. The depleted group, in contrast, shows Zr values <35 ppm and Nb values <0·25 ppm, and Th is generally below the level of detection. Amphibole crystallization temperatures calculated from major elements range from ∼960 to 830 °C for all samples in the pluton; however, we do not observe significant differences in the range of crystallization temperatures between enriched (∼960–840 °C) and depleted groups (∼940–830 °C). Bulk-rock Sr and Nd isotopes are also remarkably homogeneous and show no apparent difference between enriched (εNdi = 0·1 to –0·1; 87Sr/86Sri = 0·70420–0·70413) and depleted groups (εNdi = 0·3 to –0·4; 87Sr/86Sri = 0·70424–0·70411). Calculated amphibole-equilibrium melt compositions using chemometric equations indicate that melts were highly fractionated (molar Mg# <50), andesitic to dacitic in composition, and were much more evolved than bulk lower continental crust or primitive basalts and andesites predicted to have formed from hydrous melting of mantle-wedge peridotite beneath an arc. We suggest that melts originated from a common, isotopically homogeneous source beneath the Malaspina Pluton, and differences between enriched and depleted trace-element groups reflect varying contributions from subducted sediment-derived melt and sediment-derived fluid, respectively. Our data demonstrate that andesites and dacites were the dominant melts that intruded the lower crust, and their compositions mirror middle and upper bulk-continental crust estimates. Continental crust-like geochemical signatures were acquired in the source region from interaction between hydrous mantle-wedge melts and recycled subducted sediment rather than assimilation and/or remelting of pre-existing lower continental crust.