More Like this

1. Distinguishing multiphase and non-steady deformation histories in large seismogenic faults and shear zones

   https://doi.org/10.1130/abs/2022AM-379838  

   Klepeis, K.A. ; Webb, L. ; Miranda, E. ; and Schwartz, J. ( October 2022 , Geological Society of America Abstracts with Programs)

   Throughout her career, Professor Sharon Mosher has been a pioneer in the structural analysis of polydeformed rocks and regions. Her work on the evolution of superposed rock fabrics in complexly deformed areas, for example, has greatly improved our ability to determine how faults, shear zones, and orogens evolve over time. Traditionally, sequences of foliations, mineral lineations, folds, and other structural elements have been interpreted in terms of discrete, multiphase deformation events. However, alternative interpretations where structural sequences result from a single, progressive event also are common, especially where changes in stress fields or flow parameters result in non-steady deformation. Here, in honor of Professor Mosher, we present examples of three different types of structural sequences that formed in large seismogenic faults and shear zones in SW New Zealand and southern California. These examples illustrate the different ways in which multiple generations and styles of rock fabrics develop and become preserved in zones of localized deformation. The first example is from a large fault zone located inboard of the Puysegur subduction zone in Fiordland, New Zealand. This zone displays several generations of superposed fabrics that record a history of repeated reactivations over a few tens of millions of years. A second set of examples, from both Fiordland and southern California, illustrates how non-steady deformation can result in parallel ductile and brittle fabrics, including veins of pseudotachylyte, that formed during a single, progressive shearing event. The third example, also from Fiordland, shows how parallel rock fabrics in a large, lower crustal shear zone formed diachronously across a large region as the inboard and outboard belts of the Mesozoic Median batholith converged. Each of these examples displays different structural relationships among rock fabrics in the field. To decipher their histories, we combined structural data with 40Ar/39Ar and U-Pb (zircon, titanite) geochronology. The examples illustrate the utility of combining field observations with both direct and indirect isotopic dating techniques to distinguish between superposed rock fabrics that formed during progressive deformation and those that represent distinct tectonic events. 

   more » « less
2. Competing Influence of Compositional Variability and Metamorphism on Strain Localization in a Lower-Crustal, Transpressional Shear Zone, Fiordland, New Zealand

   Lindquist, P. ; Klepeis, K. ; Miranda, E. ; Schwartz, J. ; Stowell, H. ( October 2019 , American Geophysical Union Abstracts with Programs)

   Over 500 km2 of rock exposure in Fiordland, New Zealand records strain localization processes accompanying the formation of a steep, transpressional shear zone within the root of a Cretaceous continental magmatic arc. Here, we pair field observations with microstructural and petrographic analyses of the George Sound shear zone (GSSZ) to investigate how metamorphism and compositional variability influenced shear zone evolution in the lower continental crust. The northern portion of the 50 km-long GSSZ deforms a monzodioritic pluton where superposed mineral fabrics record a narrowing of the shear zone width over time. Early stage deformation was accommodated mostly by dynamic recrystallization of pyroxene and plagioclase, forming a steep zone of coarse, gneissic foliations over 10 km wide. Subsequent deformation created a 2 km-thick zone of mylonite containing fine-grained plagioclase, hornblende, biotite, and quartz. The latter three minerals formed during the hydration of older minerals, including igneous pyroxene. The change in mineralogy and grain size also produced thin (< 1 mm), weak layers that localized deformation in shear bands in the highest strain zones. The southern ~35 km of the GSSZ deforms a heterogeneous section of granite, diorite, and metasedimentary rock. In this area, the hydration of igneous assemblages also is pervasive but is not restricted to high-strain zones. Instead, the shear zone branches into four ≤1 km-wide strands that closely follow lithologic contacts. The thinnest branch occurs at the contact of a coarse-grained, dioritic pluton and a fine-grained granitic pluton. These patterns suggest that the factors that controlled strain localization in the GSSZ vary along its length. In the north, where its host rock is homogeneous, retrograde metamorphism helped localized strain into shear bands at the micro scale, mirroring a narrowing at the km scale. In the south, lithologic contacts created weak zones that appear to have superseded the effects of metamorphism, creating a series of thin, branching high-strain zones. These results suggest that the rheology of lower-crustal shear zones also varies significantly along their length and over time. Both of these factors can be used to generate improved models of continental deformation. 

   more » « less
3. How is continental crust built? A study of how fault zone deformation controls vertical transport of magma during crustal growth in Fiordland, New Zealand

   Brown, V. ; Miranda, E.A. ( April 2021 , CSUNPosium: Annual Student Research and Creative Works Symposium)

   null (Ed.)

   Subduction zones are sites where converging tectonic plates create magma that is transported upward by faults (acting as conduits) within the crust, incrementally building the continent over time. However, how faults and their deep, ductile counterparts (shear zones) transport magma across the entire thickness of the crust is not well understood. This is important to investigate because faults remain as zones of weakness and may trigger large magnitude earthquakes (Barnes et al., 2016). Fiordland, New Zealand, has a system of interconnected faults and shear zones that transect the world’s best-preserved section of crust produced in a subduction zone. We will focus on shear zone rocks from the middle crust, where the shear zone narrows in width as the composition of the crust changes. We hypothesize that the change in crustal composition acted as a strength boundary within the shear zone, changing the geometry of strain to allow for more localized movement of magma and deformation. 

   more » « less
4. Temporal and spatial variations in magmatism and transpression in a Cretaceous arc, Median Batholith, Fiordland, New Zealand

   https://doi.org/10.1130/L1073.1  

   Buriticá, Luisa F. ; Schwartz, Joshua J. ; Klepeis, Keith A. ; Miranda, Elena A. ; Tulloch, Andy J. ; Coble, Matthew A. ; Kylander-Clark, Andrew R.C. ( September 2019 , Lithosphere)

   Abstract We investigated the interplay between deformation and pluton emplacement with the goal of providing insights into the role of transpression and arc magmatism in forming and modifying continental arc crust. We present 39 new laser-ablation–split-stream–inductively coupled plasma–mass spectrometry (LASS-ICP-MS) and secondary ion mass spectrometry (SIMS) 206Pb/238U zircon and titanite dates, together with titanite geochemistry and temperatures from the lower and middle crust of the Mesozoic Median Batholith, New Zealand, to (1) constrain the timing of Cretaceous arc magmatism in the Separation Point Suite, (2) document the timing of titanite growth in low- and high-strain deformational fabrics, and (3) link spatial and temporal patterns of lithospheric-scale transpressional shear zone development to the Cretaceous arc flare-up event. Our zircon results reveal that Separation Point Suite plutonism lasted from ca. 129 Ma to ca. 110 Ma in the middle crust of eastern and central Fiordland. Deformation during this time was focused into a 20-km-wide, arc-parallel zone of deformation that includes previously unreported segments of a complex shear zone that we term the Grebe shear zone. Early deformation in the Grebe shear zone involved development of low-strain fabrics with shallowly plunging mineral stretching lineations from ca. 129 to 125 Ma. Titanites in these rocks are euhedral, are generally aligned with weak subsolidus fabrics, and give rock-average temperatures ranging from 675 °C to 700 °C. We interpret them as relict magmatic titanites that grew prior to low-strain fabric development. In contrast, deformation from ca. 125 to 116 Ma involved movement along subvertical, mylonitic shear zones with moderately to steeply plunging mineral stretching lineations. Titanites in these shear zones are anhedral grains/aggregates that are aligned within mylonitic fabrics and have rock-average temperatures ranging from ∼610 °C to 700 °C. These titanites are most consistent with (re)crystallization in response to deformation and/or metamorphic reactions during amphibolite-facies metamorphism. At the orogen scale, spatial and temporal patterns indicate that the Separation Point Suite flare-up commenced during low-strain deformation in the middle crust (ca. 129–125 Ma) and peaked during high-strain, transpressional deformation (ca. 125–116 Ma), during which time the magmatic arc axis widened to 70 km or more. We suggest that transpressional deformation during the arc flare-up event was an important process in linking melt storage regions and controlling the distribution and geometry of plutons at mid-crustal levels. 

   more » « less
5. Unraveling fault reactivations and their tectonic significance using integrated structural data and 40Ar/39Ar geochronology, examples from NW Vermont and SW New Zealand

   Klepeis, Keith ; Webb, Laura E. ; Merson, Matthew Q. ; and Kim, Jonathan ( April 2018 , Abstracts with programs - Geological Society of America)

   Many large fault zones record multiple reactivations that can be difficult to resolve and interpret in the field. Here, we use examples from Vermont and New Zealand to illustrate how structural data combined with 40Ar/39Ar geochronology can be used to reconstruct fault reactivation histories and interpret their possible origins. In SW New Zealand, the Spey-Mica Burn fault zone parallels a transpressive boundary between the Pacific and Australian plates. Integrated structural and 40Ar/39Ar data obtained from pseudotachylyte, mylonite, and other fault rocks allow us to distinguish successive phases of faulting (i.e., reactivations) from cases where different styles of brittle and ductile deformation occurred simultaneously (or nearly so) in the fault zone. Apparent age spectra from multiple minerals show age gradients that reveal four reactivations spanning ~20 Ma. The style and timing of these events correlate well to times of increased convergence rate and collisions between oceanic ridge segments and a nearby trench. Fault zones in NW Vermont also record different styles of reactivation. The Hinesburg Thrust (HT), which juxtaposes Late Proterozoic-Early Cambrian rift clastic rocks against Ordovician carbonate rocks of the Champlain Valley belt, includes a ~30 m thick zone of mylonite that is cut by a cataclastic fault and deformed by folds. 40Ar/39Ar data suggest the mylonite formed during the Ordovician Taconic orogeny and later was folded into a series of domes and basins during the Late Silurian-Devonian Acadian orogeny. Farther west, the Champlain thrust fault (CT) juxtaposes Cambrian dolostones against Ordovician calcareous shales. Superposed faults within the foot wall of the CT show a progressive change in movement direction from W-directed thrusting, to NW-directed thrusting, to N-S slip, and NE-SW slip. These changing slip directions appear to reflect wholly Taconic motion along a north-dipping lateral ramp between Burlington and Shelburne where the CT cuts up section to the south. Acadian reactivation of the CT appears restricted to late folding similar to the HT. These examples highlight the utility of combining structural data with 40Ar/39Ar geochronology to unravel slip histories in continental fault zones and to distinguish among the different styles and origins of fault reactivation. 

   more » « less