skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Exploring AC Power Flow Resultants through the Lens of Multi-homogeneous Algebraic Geometry
The computational aspects of power systems have been exploring the steady states of AC power flow for several decades. In this paper, we propose a novel approach to AC power flow calculation using resultants and discriminants for polynomials, which are primarily compiled for quadratic power flow equations. In the case of AC power flow nonlinear systems, it is not possible to determine the number of isolated solutions. However, for polynomial systems, the theorem of Bézout is the primary theorem of algebraic geometry. This study considers a certain multi-homogeneous structure in an algebraic geometry system to demonstrate that the theorem of Bézout is indeed a generalization of the fundamental theorem, among other results.  more » « less
Award ID(s):
1851602
PAR ID:
10515334
Author(s) / Creator(s):
Publisher / Repository:
IEEE
Date Published:
ISBN:
979-8-3503-3540-8
Page Range / eLocation ID:
1 to 5
Subject(s) / Keyword(s):
AC Power, AC Power Flow, Power System, Algebraic System, Power Flow Equations, Symmetric Matrix, Normalization Factor, Complex Conjugate, Square Matrix, Kronecker Product, Polynomial Equation, Complex Power, Real Curve, Univariate Polynomial, Power Flow Problem
Format(s):
Medium: X
Location:
Manhattan, KS, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. Unfolder-based quasi-single-stage ac-dc power converter has been widely used for high-power electric vehicle (EV) charging systems for its high efficiency and power density. However, the resonance between the grid inductance (impedance) and the capacitors on the soft-dc-link of the converter impacts the system stability and significantly limits the system control bandwidth and dynamic response performance. A quasi-single-stage ac-dc converter with unfolder plus T-bridge series resonant converter (T-SRC) is studied in this work. The small-signal modeling and plant transfer function derivation of the T-SRC is presented in this paper. A damping filter design using the extra element theorem (EET) is then proposed to achieve high- bandwidth and stable operation of the quasi-single-stage ac-dc converter. Simulation and hardware results from an 18 kW module for high-power EV charging are provided to validate the proposed modeling and damping filter design. 
    more » « less
  2. The non-linearity and non-convexity of the AC power flow equations may induce convergence problems to the Newton-Raphson (NR) algorithm. Indeed, as shown by Thorp and Naqavi, the NR algorithm may exhibit a fractal behavior. Furthermore, under heavy loading conditions or if some of the line reactances are relatively large compared to the others, the Jacobian matrix becomes ill-conditioned, which may cause the divergence of this algorithm. To address the aforementioned problems for radial power distribution systems, we propose in this paper to apply a sinusoidal transform to map the AC power flow equations into a convex quadratic form, which includes nodebased and Pythagorean equations. The good performance of the proposed approach is demonstrated via simulations carried out on several power distribution systems. 
    more » « less
  3. Emerging distribution systems with a proliferation of distributed energy resources are facing with new challenges, such as voltage collapse and power flow congestion in unsymmetrical network configurations. As a fundamental tool that could help quantify these new challenges and further mitigate their impacts on the secure and economic operation of distribution systems, effective AC optimal power flow (ACOPF) models and solution approaches are in urgent need. This study focuses on ACOPF of three‐phase four‐conductor configured distribution systems, in which neutral conductors and ground resistances are modelled explicitly to reflect practical situation. In addition, by leveraging the Kirchhoff's current law (KCL) theorem and the effect of zero injections, voltage variables of neutrals and zero‐injection phases can be effectively eliminated. The ACOPF problem is formulated as a convex semidefinite programming (SDP) relaxation model in complex domain. In recognising possible solution inexactness of SDP relaxation model, a Karush–Kuhn–Tucker condition based process is further proposed to effectively recover feasible solutions to the original ACOPF problem by calculating a set of computational‐inexpensive non‐linear equations. Numerical studies on a modified IEEE 123‐bus system show the effectiveness of the proposed SDP relaxation model with variable reductions and the feasible solution recovery process for three‐phase four‐conductor configured distribution systems. 
    more » « less
  4. MMC-based back-to-back (B2B) converters are promising for hybrid AC/DC transmission systems when integrating large scale PV sources. This paper proposes a novel configuration for hybrid AC transmission systems with B2B converters and multi-terminal direct current (MTDC) operation which facilitates the integration of PV energy and enhances the system stability and reliability. This is achieved by an advanced interconnection with two operation modes: 1-A bi-directional power flow via AC connections, and 2- Direct active power injection to the MTDC from PV source. Conventional outer, inner and capacitor voltage balancing control systems are utilized in this study for regulating the currents and voltages of B2B converter. Also, The Perturb and observe (P and O) technique is implemented for obtaining maximum power point tracking (MPPT) of the PV generation considering a dc-dc boost converter. The efficacy of this proposed configuration is verified through time-domain simulations carried out by MATLAB/SIMULINK. 
    more » « less
  5. Optimal Transmission Switching (OTS) problems minimize operational costs while treating both the transmission line energization statuses and generator setpoints as decision variables. The combination of nonlinearities from an AC power flow model and discrete variables associated with line statuses makes AC-OTS a computationally challenging Mixed-Integer Nonlinear Program (MINLP). To address these challenges, the DC power flow approximation is often used to obtain a DC-OTS formulation expressed as a Mixed-Integer Linear Program (MILP). However, this approximation often leads to suboptimal or infeasible switching decisions when evaluated with an AC power flow model. This paper proposes an enhanced DC-OTS formulation that leverages techniques for training machine learning models to optimize the DC power flow model's parameters. By optimally selecting parameter values that align flows in the DC power flow model with apparent power flows—incorporating both real and reactive components—from AC Optimal Power Flow (OPF) solutions, our method more accurately captures line congestion behavior. Integrating these optimized parameters into the DC-OTS formulation significantly improves the accuracy of switching decisions and reduces discrepancies between DC-OTS and AC-OTS solutions. We compare our optimized DC-OTS model against traditional OTS approaches, including DC-OTS, Linear Programming AC (LPAC)-OTS, and Quadratic Convex (QC)-OTS. Numeric results show that switching decisions from our model yield better performance when evaluated using an AC power flow model, with up to 44% cost reductions in some cases. 
    more » « less